Buscar
Mostrando ítems 21-30 de 55
Implementation of a Calibration Wireless System in a Pharmaceutical Facility
(Polytechnic University of Puerto Rico, 2012)
Abstract - Regulated industries such as Pharmaceutical, Biotechnology and Medical Devices require a Calibration Program, to guarantee the product quality. The objective of this project was to design Calibration Wireless ...
Estudio de los Aspectos Ergonómicos en Laboratorios de Control de Calidad en Industrias Farmacéuticas
(Polytechnic University of Puerto Rico, 2009)
Abstracto - El objetivo de esta investigación es conocer, cuan efectivo son los diseños ergonómicos en laboratorios de control de calidad de las industrias farmacéuticas. En esta investigación se realizó una evaluación de ...
Lean and Safe Manufacturing for an Antidepressant Tablets Coating Process
(Polytechnic University of Puerto Rico, 2009)
Abstract - The Lean and Safe Manufacturing Process (6S event) was selected for implementation in an antidepressant tablets coating manufacturing process. The coating process was identified due to the utilization of toxic ...
Smart Camera Mimics Humans Decision Making Process in a Vial Crimp Quality Automated Inspection Process
(Polytechnic University of Puerto Rico, 2013)
Crimp quality is an important attribute
in the vial filling process. It protects the sterility of
the product from manufacturing until it is dispensed.
A pharmaceutical company performed a Failure
Mode and Effect ...
Determination of In-Processing Manufacturing Impact into Elution Rate of Drug Eluting Steroid Collars
(Polytechnic University of Puerto Rico, 2012)
Abstract - The Food and Drug Administration provides regulations for combination products. The medical device industry needs to comply with these regulations specifically in products containing drug. One of the many ...
Development of Bulk Shipping Studies in Pharmaceutical Industry
(Polytechnic University of Puerto Rico, 2012)
Abstract ⎯ A bulk shipping study in the pharmaceutical industry consists in monitoring and analyzing the environmental conditions (e.g. temperature and relative humidity) during shipping and transportation of the drug ...
H&K Capsule Filling Equipment Reliability
(Polytechnic University of Puerto Rico, 2013)
Encapsulation is a process whereby the
dose is charged into a hard gelatin capsule;
powder, pellets, tablets or combinations of two or
more of these may be filled into the capsules.
Capsules provide a convenient way ...
Cycle Time Reduction using Lean Manufacturing Techniques for a Solid Pharmaceutical Product
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ The purpose of this project was to demonstrate that the Lean Manufacturing techniques could be applied to a Solid Pharmaceutical Product in order to reduce the cycle time. During the year 2007, the Solid ...
Application of DMAIC Methodology to Improve the Utilization of an Industrial Glassware Washer System in a Biopharmaceutical Industry
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ This article describe how the problem solving approach of Define, Measure, Analyze, Implement and Control (DMAIC) is applied to increase the utilization of an industrial glassware washer system in a Biopharmaceutical ...
Optimization of On-Line Automated Dissolution System for Solid Dose Control Release Tablets
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ An optimization of an automated dissolution system for control release tablets has been accomplished by the implementation of several variables using Six Sigma tools. Variables under evaluation includes: filter ...