Zur Kurzanzeige

dc.rights.licenseAll rights reserveden_US
dc.contributor.advisorGonzález Miranda, Carlos J.
dc.contributor.authorMercado López, Josean
dc.date.accessioned2023-09-15T00:30:13Z
dc.date.available2023-09-15T00:30:13Z
dc.date.issued2023
dc.identifier.citationMercado López, J. (2023). Product Mix Analysis in Manufacturing Line [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico.en_US
dc.identifier.urihttp://hdl.handle.net/20.500.12475/1967
dc.descriptionDesign Project Article for the Graduate Programs at Polytechnic University of Puerto Ricoen_US
dc.description.abstractThis research project was focused on the Product Mix Analysis of a Medical Device manufacturing line due to a customer complaint. A product mix is a manufacturing defect and is defined as a mix of components/ assembly products in a batch or a mix of different batches of the same component/ assembly product. DMAIC methodology was used in order to find a root cause and implement a corrective action for the product mix defect. DMAIC is a five-step method for improving existing process problems with unknown causes [1]. The phases or stages of DMAIC include Define, Measure, Analyze, Improve and Control. In this case eliminating the product mix defect in the manufacturing line will increase the yield, eliminate customers complaints for product mix defect and reduce rework. This research seeks to eliminate product mix defects. The importance of eliminating this defect will reduce rework, customer complaints, increase the customer satisfaction and maintain product compliance. Key Terms - Compliance, Customer Complaint, Manufacturing Line, Product Mix Defect.en_US
dc.language.isoenen_US
dc.publisherPolytechnic University of Puerto Ricoen_US
dc.relation.ispartofManufacturing Engineering;
dc.relation.ispartofseriesSpring-2023;
dc.relation.haspartSan Juanen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Researchen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Postersen_US
dc.subject.lcshSix sigma (Quality control standard)en_US
dc.subject.lcshMedical instruments and apparatus industry--Production control
dc.titleProduct Mix Analysis in Manufacturing Lineen_US
dc.typeArticleen_US
dc.rights.holderPolytechnic University of Puerto Rico, Graduate Schoolen_US


Dateien zu dieser Ressource

Thumbnail
Thumbnail

Das Dokument erscheint in:

Zur Kurzanzeige