Buscar
Mostrando ítems 1-10 de 40
Battery Assembly Re-design in a Medical Device Company
(Polytechnic University of Puerto Rico, 2012)
Abstract - Today, customer complaints is a strategic business metric for the organizations to measure the customer satisfaction and product’s performance. During YR2011, an adverse trend on complaints per million (CPMs) ...
Reducción del Tiempo de Proceso para la Manufactura del Catéter de Bonanno
(Polytechnic University of Puerto Rico, 2011)
Abstracto - Este proyecto fue llevado a cabo en una planta de dispositivos médicos. Su propósito fue estudiar el proceso de manufactura del catéter del producto Bonanno para encontrar oportunidades reduciendo un 15% el ...
Quality Inspection Time Reduction for Double Pouch Products
(Universidad Politécnica de Puerto Rico, 2023)
Improvements on inspection times are a common subject of analysis for continuous improvements projects, because of the imperative need of reducing time for non-value-added processes. This project, undertaken at Medical ...
Implementación de Lean y Seis Sigma para mejorar una celda de producción de neuroestimuladores
(Universidad Politécnica de Puerto Rico, 2020)
En el presente artículo se aborda un problema de una empresa de la industria de dispositivos médicos en República Dominicana que necesita aumentar el “throughput” de una línea de producción de neuroestimuladores en al menos ...
Reducing Documentation Errors by Designing a Continuous Workflow for the In-Process of Spinal Needles
(Polytechnic University of Puerto Rico, 2022)
Good Documentation Practices are essential to maintain a robust Quality System. Many documentation errors were constantly found on acceptance records at the Product Release-to-Packaging stage. ...
Improve Material Flow at Supplier
(Polytechnic University of Puerto Rico, 2012)
Abstract ⎯ This project will be focused in reducing the high lead time that characterizes one of the suppliers in a Medical Device Organization. By reducing the lead time of this supplier, the organization expects to have ...
Installation of a New Cognex Vision System for Quality Inspection on PDS (ATS5889) Machine at Surgical Device Company in the Eastern Region of Puerto Rico
(Polytechnic University of Puerto Rico, 2014)
There is a 4-6% scrap on PDS
(Protected Disposable Scalpel) machine actual
vision system. It is important for the company to
manage more efficiently and try to reduce scrap
percentage through the entire process of the ...
Machining Process Characterization for Breakoff Torque on Spinal Implants
(Polytechnic University of Puerto Rico, 2012)
Abstract - Breakoff torque value on Spinal Implants is critical to ensure proper fixation of the
system to the human vertebrae. Testing of manufacturing samples involves destructive testing
which leads to scrap cost. The ...
Tracking System for Useful Life of an Insulin Pump Motor
(Polytechnic University of Puerto Rico, 2016)
This research project was focused in
the implementation of a Tracking System for the
useful life of an infusion pump’s motor. This
component is a sub-assembly of the infusion pump
which is used to deliver fluids into ...
Diseño de Proceso de Retorno de Componentes Funcionales de Dispositivos Médicos
(Polytechnic University of Puerto Rico, 2016)
El uso de un dispositivo médico es más
común día tras día. El constante aumento en
producción aumenta además la acumulación de
unidades fallidas en el área de manufactura. Cada
proyecto de creación para una línea ...