Listar Manufacturing Competitiveness por título
Mostrando ítems 206-225 de 270
-
Production Optimization in the Packaging and Inspection Process at a Thermoforming Area
(Polytechnic University of Puerto Rico, 2008)This research is conducted in a manufacturing packaging company that makes the packages (plastic trays) for medical device companies. It is intended to increase the packaging and inspection production line by considering ... -
Productivity Increase by Means of Critical Process Automation for Edwards Lifesciences
(Universidad Politécnica de Puerto Rico, 2020)Due to the boom in exports of medical devices, the effort to maintain product quality has increased, but productivity has remained unchanged. In the free zone industries, direct labor is one of the variation factors that ... -
Programa de Auditoría Interna - Inspección de Calidad
(Polytechnic University of Puerto Rico, 2019)La auditoría interna es un sistema de control de la empresa y consiste en el conjunto de medidas, políticas y procedimientos establecidos en una organización para proteger su activo, minimizar los riesgos, incrementar ... -
Proyecto Piloto de Concepto Esbelto y Administración Kaizen en un Centro de Llamadas
(Polytechnic University of Puerto Rico, 2017)La Administración “X” representa las transacciones generales y maneja los centros de servicio al cliente en diferentes puntos de la isla incluyendo un centro de llamadas. El centro de su operación y la productividad ... -
Pull System for Material Replenishment in Manufacturing Sunshine Meds Design
(Polytechnic University of Puerto Rico, 2023)This project evaluates the material replenishment for manufacturing lines in Sunshine Meds Company who prepares medical devices kits in a manufacturing cleaning room. Opportunities were found looking into the material ... -
QC Downtime on Work - Orders of 100 Pieces or Less for Packaging/ Boxing Area
(Polytechnic University of Puerto Rico, 2017)In this investigation you will obtain information about a continuous improvement methods: the A3 Project application. This method follows the Plan Do Check Act (PDCA) cycle which will be conducted in the production ... -
Quality Alerts Notifications Evaluation and Response Solution for Sites to Communicate Computer Systems Potential Issues in an Alignment Form and Integrated Process
(Polytechnic University of Puerto Rico, 2020)The Quality Alert Process is used to communicate IT or computer system related situations that have the potential to adversely impact regulatory requirements (e.g. product quality, patient safety, record integrity and ... -
Quality Control Laboratory Improvements
(Polytechnic University of Puerto Rico, 2018)Sanper Pharmaceutical is an inhalation anesthesia manufacturing plant. Its main products are Elim and Marile. The high demand for its products has created the need to make improvements in their processes. As part of ... -
Quality in the Pharmaceutical Industries
(Polytechnic University of Puerto Rico, 2021)There are various techniques to measure the productivity of a certain economic activity, which is one that generates a profit from three phases: production, distribution, and consumption. One restriction in choosing the ... -
Quality Risk Management (QRM) Considerations for Introduction of New Products
(Polytechnic University of Puerto Rico, 2015)Quality Risk Management (QRM) is an optional tool to improve product effectiveness and safety by assuring that the recognized risk is at a desired level. Also risk management tools provide a methodology to evaluate ... -
Radio Frequency Identification Tags (RFID) Configuration Application for Medical Device Industry Supply Chain using DMAIC Methodology
(Polytechnic University of Puerto Rico, 2021)To align data control at inner cell an RFID Configuration Application was developed with the intend to reduce lost traceability issues. Six Sigma strategy following the DMAIC methodology was used as guidance to define the ... -
Raw Material Sampling Process Optimization using Lean Six Sigma Methodology
(Polytechnic University of Puerto Rico, 2014)Pharmaceutical Industry needs reduce the costs without impact the quality of the product. The principal objective of this project is the reduction of the cycle time of a raw material sampling process from 8 days to 2 ... -
Redesign of a Space in the Autopsy Room Assigned for the Preparation of Biological Samples for Toxicological Analysis by Using DMADV Technique
(Polytechnic University of Puerto Rico, 2022)The government agency of the Institute of Forensic Sciences recently received the necessary accreditations to be able to provide the essential service it offers to the citizens of Puerto Rico. The objective of this project ... -
Reducción de Gastos en la Calibración Externa en una Industria de Dispositivos Médicos de Puerto Rico
(Polytechnic University of Puerto Rico, 2016)El Departamento de Metrología y Calibración es una de las áreas del negocio que más altos costos genera debido principalmente al alto costo de la calibración externa. Actualmente, esta empresa cuenta con 844 modelos ... -
Reducción de unidades defectuosas en el área de ensamblaje en una compañía de dispositivos médicos
(Polytechnic University of Puerto Rico, 2019)Según estadísticas evaluadas semanalmente se está notando una alza de desperdicios en el área de ensamblaje de la línea de producción del Producto M. La compañía se está afectando económicamente con un total semanal ... -
Reducción del Tiempo de Cambio para la Línea de Empaque#5
(Polytechnic University of Puerto Rico, 2018)Se utiliza la técnica de Lean Manufacturing con la metodología DMAIC para reducir el tiempo de cambio o Changeover de la línea de empaque#5. Para llevar a cabo su implementación se midieron las fases de culminación ... -
Reducción del Tiempo de Proceso para la Manufactura del Catéter de Bonanno
(Polytechnic University of Puerto Rico, 2011)Abstracto - Este proyecto fue llevado a cabo en una planta de dispositivos médicos. Su propósito fue estudiar el proceso de manufactura del catéter del producto Bonanno para encontrar oportunidades reduciendo un 15% el ... -
Reducción en el Tiempo de un Proceso de Esterilización en un Tanque para la Manufactura de un Producto Biológico
(Polytechnic University of Puerto Rico, 2013)Con el propósito de reducir costos en producción asociados a tiempos de espera, con este trabajo evaluaremos el proceso de esterilización de un tanque fijo. Se revisará si es posible reducir el tiempo de exposición de ... -
Reduce Expenses by Reusing Consumables for the DNA Extraction Department
(Polytechnic University of Puerto Rico, 2016)The genotyping lab has been spending an excessive amount of the budget on E-Z 96 DNA plate (plastic plates for storing samples). The plates contain the samples trough the sample collecting process in the field and the ... -
Reduciendo los Defectos Cosméticos y de Precisión en el Proceso de Plateado de las Piezas Manufacturadas en la Empresa Keysight Technologies
(Polytechnic University of Puerto Rico, 2020)En la actualidad muchas de las empresas buscan como objetivo estar en un mercado competitivo. Dicho mérito conlleva mucha dedicación, disciplina y la aplicación de métodos analíticos con el propósito de satisfacer las ...