ListarManufacturing Competitiveness por tema "Time management"
Mostrando ítems 1-20 de 28
-
Analytical Method Technology Transfer From Quality Control Laboratory To Manufacture Area
(Polytechnic University of Puerto Rico, 2021)The project was developed with the intent to document the analytical transfer method to reduce in-process concentration testing cycle time. A reduction of up to 50% turnaround time (TAT) downtime was achieved. Waste reduction ... -
Application of Lean Manufacturing and Lean Six Sigma Tools to Improve Back to Back Activities in the Compression Process
(Polytechnic University of Puerto Rico, 2019)A recent opportunity regarding a product ramp up in the production schedule due to a potential product transfer requires the manufacturing area to look for creative ways to improve in order to comply with expected ... -
Audit Process Optimization in the Manufacturing Area
(Polytechnic University of Puerto Rico, 2021)This project was developed to demonstrate a viable audit process optimization in the manufacturing area. The AbbVie site ubicated in Barceloneta, Puerto Rico,started with only one product back in ... -
Changeover Reduction Time by Adjusting the Cleaning Critical Parameters in Automated CIP Systems
(Polytechnic University of Puerto Rico, 2018)Clean-In-Place (CIP) is a widely use process to clean biotechnology vessels contact surfaces. CIP is an automated cleaning method that involve minimum to no equipment disassembling thereby reducing labor and time ... -
¿Cómo se puede mejorar el sistema de calidad y seguimiento de un producto a nivel corporativo?
(Polytechnic University of Puerto Rico, 2022)El sistema de calidad en todos los ámbitos laborales es muy necesario ya que las compañías pueden probar que están cumpliendo con las regulaciones y requisitos de los clientes. Las compañías necesitan mejorar y crear ... -
Diseño de un Sistema Automatizado de Lotes para una Fábrica de Productos de Consumo
(Polytechnic University of Puerto Rico, 2013)Una fábrica de jugos tenía un área de oportunidad relacionada a la falta de abasto a la demanda debido a la poca capacidad de manufacturar jugos a grandes escala. Este proyecto tiene como objetivo reducir el tiempo ... -
Estructura para Reconciliación de Lotes en Área de Encapsulación Utilizando la Metodología Esbelta (“Lean”)
(Polytechnic University of Puerto Rico, 2021)La industria farmacéutica ha enfrentado muchos cambios con el paso del tiempo. La necesidad de adaptarse a estos cambios ha provocado que las farmacéuticas hayan tenido que adoptar diferentes metodologías para mantener la ... -
Evaluation to Sleeves Used in Granulation Department for the Graduate Programs at Polytechnic University of Puerto Rico
(Polytechnic University of Puerto Rico, 2021)The DMAIC methodology was applied to analyze a manufacturing system at Johnson & Johnson Pharmaceuticalsin Las Piedras, Puerto Rico. The methodology was used to improve the time for changing and ... -
Feasibility Study of Proposed Manufacturing Layout Re-design to Improve Process Capacity and Reduce Cycle Time of a Downstream Operation of Product A
(Polytechnic University of Puerto Rico, 2022)Lean Six Sigma tools and methodologies are widely used in today’s work environments. The use of a Lean Six Sigma approach provides organizations more flexibility and efficiency to improve their competitiveness. At the ... -
Implementación de Nexgen-PTS y M9 Series para el Mejoramiento y Eficiencia en los Resultados de Control de Calidad
(Polytechnic University of Puerto Rico, 2021)El tiempo y el ahorro monetario es una herramienta sumamente importante en la industria biomédica. Esto nos lleva a estar en constante innovación con el fin de mejoras continuas. El objetivo de este proyecto es reducir la ... -
Improve the Cycle Time of Stat Testing in Quality Control Laboratory Applying Kaizen Analysis
(Polytechnic University of Puerto Rico, 2013)Quality Control Laboratory of Biopharma Company was selected for develop a design project, using the technique of Kaizen Project. Manufacturing area of Biotech Company produces a biological product. Biologic Bulk ... -
Improving the flow of Sampling Analysis of Manufacturing Batches to reduce time and Increase the Capacity of the Process
(Polytechnic University of Puerto Rico, 2022)This research will focus on analyzing the flow of sample analysis of manufacturing batches to reduce time and increase the capacity of the process in the laboratories. A laboratory in the pharmaceutical industry receives ... -
In-Process pharmaceutical manufacturing aqueous coating suspension hold time study
(Polytechnic University of Puerto Rico, 2018)A hold time study is established in the development phase of any product. All the InProcess unit operations require a hold time study to protect the integrity and quality of the final drug product. This study will analyze ... -
Mejoras al Proceso de Empaque parala Jurisdicción de China
(Polytechnic University of Puerto Rico, 2022)En los últimos dieciocho meses, el mundo ha confrontado retos con el suministro de materia prima. En esta empresa no es la excepción, además, la productividad redujo, los desperdicios aumentaron y el tiempo de ... -
On Boarding Cycle Time Improvement to Accelerate Recruitment of Store Operations
(Polytechnic University of Puerto Rico, 2015)Recruitment is a crucial step in all of the companies around the world. Is the process of finding and hiring the best qualified candidate for a job opening, in a timely and cost effective manner, This process also ... -
Optimization of the Registration Process of Products on the Pharmaceutical Industry of Puerto Rico
(Polytechnic University of Puerto Rico, 2018)Registration Process for pharmaceutical products in Puerto Rico has unique requirements for the marketing, sale, and distribution of the products. The Organizations must be approved before they can market, sell ... -
Process Time Reduction in Manufacturing Areas: Visual Valves Identification on Manufacturing Area specifically on Media Prep Area, Media Preparation tanks to Pursue Agility on the Visual inspections required before, during and after the Media Prep Solution are Prepared
(Polytechnic University of Puerto Rico, 2022)Time of production process and associate activities were evaluated for Media Prep manufacturing process on Juncos, P.R. The voice of the customer requested reduced time inspection process before, ... -
Redesign of a Space in the Autopsy Room Assigned for the Preparation of Biological Samples for Toxicological Analysis by Using DMADV Technique
(Polytechnic University of Puerto Rico, 2022)The government agency of the Institute of Forensic Sciences recently received the necessary accreditations to be able to provide the essential service it offers to the citizens of Puerto Rico. The objective of this project ... -
Reducción del Tiempo de Cambio para la Línea de Empaque#5
(Polytechnic University of Puerto Rico, 2018)Se utiliza la técnica de Lean Manufacturing con la metodología DMAIC para reducir el tiempo de cambio o Changeover de la línea de empaque#5. Para llevar a cabo su implementación se midieron las fases de culminación ... -
Reducción del Tiempo de Proceso para la Manufactura del Catéter de Bonanno
(Polytechnic University of Puerto Rico, 2011)Abstracto - Este proyecto fue llevado a cabo en una planta de dispositivos médicos. Su propósito fue estudiar el proceso de manufactura del catéter del producto Bonanno para encontrar oportunidades reduciendo un 15% el ...