Buscar
Mostrando ítems 121-130 de 183
Right to Operate Training Metric Improvement
(Polytechnic University of Puerto Rico, 2018)
This research was focused on
understanding why operators are unable to
complete their trainings on time. Thus, impacting
manufacturing support and increasing the effort of
those operators that are qualified and ready ...
Process Safety: Explosion Protection Equipment
(Polytechnic University of Puerto Rico, 2018)
Nowadays as the Manufacturing
Industry is growing, much of them create new
facilities and others just make improvements in their
existing facilities. But something that all of them
need to take to consideration is their ...
Finite Element Analysis of Sandwich T-Joints Subjected to Water Slamming Loads
(Polytechnic University of Puerto Rico, 2018)
This article evaluates the structural
response of a sandwich ship hull with T-joint
longitudinal stiffeners subjected to water slamming.
Finite element analysis was conducted using the
commercial code LS-DYNA. The ...
Shipper Harmonization to Lower Machine Cost
(Polytechnic University of Puerto Rico, 2018)
This shipper harmonization
process to lower machine cost project was
focused in improve the packaging process and
machine cost reduction in this case a Case
Packer by going to a shipper harmonization
process. The ...
Improve the Lay-Up Process by Reducing 15% of the Documentation Errors within Six Months using Kaisen and/or DMAIC Six Sigma Tool
(Polytechnic University of Puerto Rico, 2018)
From August 2017 to October 2017
(3Q2017) the documentation errors (including layup errors and mixed styles) were 96% average in
one Distribution Center at the west coast. DMAIC
methodology was applied including lean ...
Reducción de “Lead Time” en el Proceso de Reclamaciones de Daños a la Propiedad ante las Aseguradoras Privadas
(Polytechnic University of Puerto Rico, 2018)
En el estudio a continuación se
utilizaran diferentes herramientas y metodologías
utilizadas en el ámbito de la manufactura para
poder medir, analizar y disminuir el tiempo que
toman las reclamaciones de daños a la ...
El uso de entrevistas dirigidas para determinar la capacidad de las personas en relacionar un olor con una marca
(Polytechnic University of Puerto Rico, 2018)
Data Mining Techniques for the Integrated Postsecondary Data System
(Polytechnic University of Puerto Rico, 2018)
The Process of generating the
necessary information for the Integrated
Postsecondary Data System can be tedious; a
standard way to collect the information for the
different departments is needed. To process it, we
use ...
Comparative Analysis of the Wind Speeds and Wind Loads Requirements for Puerto Rico on the Last Three Decades
(Polytechnic University of Puerto Rico, 2018)
This paper presents an analysis of the
changes and differences of the wind load provisions
between the Building Regulation No. 7 of Puerto
Rico (amended in 1987) and the ASCE 7-88
through ASCE 7-16 and how they compare ...
Analysis of Billboards Signs Collapse Due to Intensive Wind of Hurricane Maria
(Polytechnic University of Puerto Rico, 2018)
In Structural Analysis the collapse of
different structures always will depend on factors
such as the loads, dimensions and material used for
building the structure. Billboards signs are
commonly used by the outdoor ...