Buscar
Mostrando ítems 261-270 de 346
Hair Salon Process Improvement: A Lean Six Sigma Application to Service Industry
(Polytechnic University of Puerto Rico, 2012)
Abstract - In this project the waiting elapsed time of a customer will be analyzed and standardized to reduce or eliminate this time. The main objective of this project is to keep customer waiting time within 0 to 15 ...
Design and Implementation of Daylight Harvesting Illumination System in a Retail Environment
(Polytechnic University of Puerto Rico, 2012)
Abstract - The study was conducted within a Retail Store Chain. The main objective of this project was to reduce energy consumption in a retail environment. An illumination design was performed. Light intensity level is ...
Implementación de Herramientas que Aseguran la Calidad del Servicio en Centros de Contactos
(Polytechnic University of Puerto Rico, 2012)
Abstracto ⎯ Este proyecto envuelve la integración de herramientas de calidad en nuestro centro de contactos conocido como la Red Interactiva de Servicio (RIS). El objetivo es comprender la importancia de calidad y a su vez ...
Development and Evaluation of Prototype Heat Shrink Masking Machine
(Polytechnic University of Puerto Rico, 2016)
This design project consists in
developing a prototype equipment to reduce the
heat variability produced by the current heat shrink
installation process. A heat Shrink tubing is a
shrinkable plastic tubing commonly ...
Improvement of the Statistical Techniques Quality System Element in a Medical Device Industry
(Polytechnic University of Puerto Rico, 2012)
Abstract - This project is focused on reducing the compliance risk of a Medical Device Manufacturer by improving its Statistical Techniques Quality System Element. Lean Sigma Methodology was used to identify the inputs or ...
Reducción de Desperdicios en Línea de Manufactura y Determinar la Capacidad del Proceso
(Polytechnic University of Puerto Rico, 2018)
El propósito de este proyecto fue
reducir los desperdicios en la línea de manufactura
de filtros y determinar la capacidad de cada etapa
del proceso en la línea de manufactura, la cual se
compone de tres procesos ...
Mejora de Manejo Visual para el Almacenamiento de Muestras Parenterales en los Laboratorios de Control de Calidad
(Polytechnic University of Puerto Rico, 2018)
En los laboratorios de bioquímica se
están experimentando problemas al momento de
realizar análisis y no encontrarse las muestras en
la nevera. Esta situación afecta gravemente la
productividad del laboratorio, ya que ...
Right to Operate Training Metric Improvement
(Polytechnic University of Puerto Rico, 2018)
This research was focused on
understanding why operators are unable to
complete their trainings on time. Thus, impacting
manufacturing support and increasing the effort of
those operators that are qualified and ready ...
Shipper Harmonization to Lower Machine Cost
(Polytechnic University of Puerto Rico, 2018)
This shipper harmonization
process to lower machine cost project was
focused in improve the packaging process and
machine cost reduction in this case a Case
Packer by going to a shipper harmonization
process. The ...
Improve the Lay-Up Process by Reducing 15% of the Documentation Errors within Six Months using Kaisen and/or DMAIC Six Sigma Tool
(Polytechnic University of Puerto Rico, 2018)
From August 2017 to October 2017
(3Q2017) the documentation errors (including layup errors and mixed styles) were 96% average in
one Distribution Center at the west coast. DMAIC
methodology was applied including lean ...