Auflistung Polytechnic University of Puerto Rico Nach Schlagwort "Lean manufacturing"
Anzeige der Dokumente 121-140 von 147
-
Quality Management Applied on a Food Industry
(Polytechnic University of Puerto Rico, 2011)Abstract – The research project was focused in transforming the quality engineering perspective from one that solves problems directed to engineers to one that solves routine problems that affects the entire society. ... -
Raw Material Sampling Process Optimization using Lean Six Sigma Methodology
(Polytechnic University of Puerto Rico, 2014)Pharmaceutical Industry needs reduce the costs without impact the quality of the product. The principal objective of this project is the reduction of the cycle time of a raw material sampling process from 8 days to 2 ... -
Recomendaciones para la Mitigación de Eventos de Control de Plagas en Áreas de Manufactura de Industria Farmacéutica Ubicada en Gurabo, PR
(Polytechnic University of Puerto Rico, 2022)Debido al alza en eventos de control de plagas en una industria farmacéutica ubicada en el área de Gurabo es que se realizó esta investigación. La palabra plaga significa cualquier animal o insecto no deseado ... -
Reducción de Desperdicio en el Proceso de una Pizzería
(Polytechnic University of Puerto Rico, 2019)Este proyecto se realizó en una pequeña pizzería en el pueblo de Ponce. Como parte del proyecto se observó y evaluó el proceso operacional de este comercio. Se identificaron desperdicios definidos en el sistema de ... -
Reducción de unidades defectuosas en el área de ensamblaje en una compañía de dispositivos médicos
(Polytechnic University of Puerto Rico, 2019)Según estadísticas evaluadas semanalmente se está notando una alza de desperdicios en el área de ensamblaje de la línea de producción del Producto M. La compañía se está afectando económicamente con un total semanal ... -
Reducción en el Desperdicio de Material en un Proceso de Impresión Flexográfica
(Polytechnic University of Puerto Rico, 2013)Las compañías han optado por implementar técnicas de mejoramiento que ayuden a eliminar ineficiencias en sus procesos para reducir costos y ser más competentes dentro del mercado. La materia prima es el componente ... -
Reducción en el Tiempo de un Proceso de Esterilización en un Tanque para la Manufactura de un Producto Biológico
(Polytechnic University of Puerto Rico, 2013)Con el propósito de reducir costos en producción asociados a tiempos de espera, con este trabajo evaluaremos el proceso de esterilización de un tanque fijo. Se revisará si es posible reducir el tiempo de exposición de ... -
Reducing Documentation Errors by Designing a Continuous Workflow for the In-Process of Spinal Needles
(Polytechnic University of Puerto Rico, 2022)Good Documentation Practices are essential to maintain a robust Quality System. Many documentation errors were constantly found on acceptance records at the Product Release-to-Packaging stage. ... -
Reducing Downtime Due to Glove Breakage in Manufacturing Areas
(Polytechnic University of Puerto Rico, 2022)Lean manufacturing was developed for maximizing resource utilization through the minimization of waste. During certain tasks in the Manufacturing Area, gloves tended to break. I propose that we need to reduce the walk ... -
Reduction in Waste of Raw Material Generation N and D of the Manufacturing Processes in a Medical Device Industry
(Polytechnic University of Puerto Rico, 2015)This article discusses how the industry of Medical Devices handles the reduction of waste in manufacturing processes. Companies have money losses, that can be reduce with an optimization of the manufacturing processes. ... -
Reduction of Cosmetic Defects Due to Criteria Misalignment at a Medical Device Manufacturing Line Using DMAIC Methodology
(2013)For the last few years, the economy of Puerto Rico has been negatively affected, increasing the operational cost of the industries in the Island. The Pharma / Medical Device industry is not excluded of this situation. ... -
Reduction of Time in a Manufacturing Process for a Pharmaceutical Company Located in Puerto Rico
(Polytechnic University of Puerto Rico, 2012)Abstract - The project is developed in a chemical plant of a pharmaceutical company in Puerto Rico. In 2011 the company had an increase in market demand of the active ingredient of one product. To ensure the profit plan, ... -
Research in the Requirements for Reducing the Blood Transfer Device Complains for Air Bubbles and Leakage
(Polytechnic University of Puerto Rico, 2017)An increase on complain trigger a company Quality department raising a flag for further investigation of a product Nonconformance. Using Lean Six Sigma tools and DMAIC methodology a multidisciplinary team work together to ... -
Scrap Reduction Evaluation of Filling Equipment and Short-Term Improvement Implementation
(Polytechnic University of Puerto Rico, 2014)This paper seeks to document an approach to reduce scrap losses using the Lean Six Sigma tools for process improvement in a lean manufacturing environment. The Lean Six Sigma methodology views lean manufacturing, ... -
Services Repair Optimization in a Subcontractor Company Applying Lean- 6 Sigma
(Polytechnic University of Puerto Rico, 2011)Abstract ⎯ Increasing competition between industries forced their services to expand to other countries out of their territorial limits. Job cost, planning and quality are the keys to success. This project measured, ... -
Setup Time Reduction in the Water for Injection Sampling Process on the Pharmaceutical Industry
(Polytechnic University of Puerto Rico, 2020)This work consists in the development of a new WFI sampling route that will bring several important benefits to the pharmaceutical industry. Reduction in the setup time will improve daily operations in terms of efficiency, ... -
Sistema Kanban Para Mejorar La Productividad De Los Procesos De Fabricación
(Polytechnic University of Puerto Rico, 2020)En una línea de inspección de jeringuillas, la productividad está asociada al factor humano. En el turno de trabajo donde se terminará un lote, se requiere que dos personas prepararen los componentes y producto ... -
Standardization of Cable Service Installation Orders Assignment Process in Rural and Suburban Areas
(Polytechnic University of Puerto Rico, 2015)One of the great benefits of Lean Manufacturing is its diversity of applications beyond the size and type of industry. In this article lean concept alternatives are used under the DMAIC methodology as a systematic ... -
Standardization Times in a Blending (Flex 2 Unit Operation) Manufacturing Process
(Polytechnic University of Puerto Rico, 2023)The continuous evolution in standardization, digitalization, and changes in the ways of working in manufacturing in the pharmaceutical industry and the increase in production for product X by 2023, has made it necessary ... -
Surgical Technologies Clean Room Lines Capacity Improvement
(Polytechnic University of Puerto Rico, 2015)In today’s competitive market, medical device manufacturing companies need to continuously innovate their products and process in order to maintain a leader position on the medical devices industry. Quality and Cost ...