Buscar
Mostrando ítems 531-540 de 1513
Design of a Cleaning Change Over Reduction Strategy for a High Volume Product in a Packaging Line
(Polytechnic University of Puerto Rico, 2010)
Currently packaging operations are
trying to reduce the downtime and operational cost
among others activities to enhance efficiency and
overall process performance. Based on this
objective, pharmaceutical packaging ...
Reliability of Operators performing the Visual Inspection of Parenteral Drug Products
(Polytechnic University of Puerto Rico, 2010)
The visual inspection of parenteral
product filled vials is performed to assure that any
damaged or defective unit is detected and removed
prior to packaging. This investigation evaluated
the visual inspection process ...
Development of software support tools for social work professionals
(Polytechnic University of Puerto Rico, 2010)
The objective of this project was to
identify the general needs of social work
professionals and use the software engineering
process to develop these much needed software
support tools. The primary needs identified ...
Efecto de las Extracciones en los Ríos de Puerto Rico
(Polytechnic University of Puerto Rico, 2010)
En Puerto Rico, desde la década del
50, se está llevando a cabo la extracción de
agregados en algunos ríos del país. El problema
que ha ocasionado esta actividad es la contribución
a la degradación de sus lechos. ...
Use of Experimental Design for the Characterization of a Depyrogenation Machine
(Polytechnic University of Puerto Rico, 2010)
Depyrogenation tunnel are used in
pharmaceutical filling lines to sterilize glass
containers before they are aseptically filled. These
tunnels use unidirectional hot air at temperatures
up to 350°C and can be used to ...
Process Optimization by Implementing Lean Six Sigma in an Optical Manufacturing Laboratory
(Polytechnic University of Puerto Rico, 2010)
The Design Project intends to be
implemented in an Optical Manufacturing
Laboratory. This laboratory is located at Mayagüez
with the purpose of distributing ophthalmic lenses
to different optical centers around the ...
Granulation Area Capacity Increase
(Polytechnic University of Puerto Rico, 2020)
Manufacturing pharmaceuticals are
continuously looking for waste reduction to
improve their processes and increase the
manufacturing output. Granulation area capacity
increase was evaluated for a solid dosage
pharmaceutical ...
Sistema de Monitoreo para Compuestos Farmacéuticos en el Agua Residual de Puerto Rico
(Polytechnic University of Puerto Rico, 2020)
Un amplio conjunto de diferentes
contaminantes orgánicos de aguas residuales,
incluidos muchos compuestos de preocupación
ambiental emergen en las corrientes de Puerto Rico.
Los compuestos escogidos se seleccionarán ...
Reducing Cost by Reducing Frequency of Submitting to Identify Microorganisms Isolated from Non-critical Areas in a Parenteral Manufacture
(Polytechnic University of Puerto Rico, 2020)
A microbiology laboratory identifies
all the microorganisms isolated from non-critical
rooms with a frequency of every three months, in
order to establish a microbial profile of the
microorganisms present in the ...
1x16 Post Weld Continuity
(Polytechnic University of Puerto Rico, 2021)
Laser welding is a critical process of medical device used for the manufacturing process of spinal cord stimulation leads that brings different offenders. The highest for 1x16 family is ...