Listar Design Project Articles Master Degree por título

Mostrando ítems 1049-1068 de 1490

    • Parametric Study of Lift-Drag Coefficients vs. Geometric Parameters of Axial Compressor/Turbine for Flow Blade Interactions 

      Gerena Colón, Diolinete del C. (Polytechnic University of Puerto Rico, 2013)
      This project is a parametric study of the Lift-Drag coefficients from blade hub to tip radius of Axial Compressor/Turbine for flow blade interactions. The study contemplates the effect of Lift and Drag forces varying ...

    • Parenterals Vial Manufacturing Filling Area Yield Improvement Project 

      Ortega Pérez, Josué (Polytechnic University of Puerto Rico, 2015)
      In the Parenterals Pharmaceutical industry a quality, financial and manufacturing measure of how the process is being operated and that measures the appropriate use of materials, excipients, and active product ingredients ...

    • PARM-IT Process Robustness 

      Matías, José I. (Polytechnic University of Puerto Rico, 2016)
      Long turnaround times to complete requests, mistakes performed by the employees, and ineffective forms used by the clients to submit their requests are some of the problems faced by the employees handling the PARM-IT ...

    • Particle detection tool for liquid product inspection machines 

      García Duprey, Angie Ly (Polytechnic University of Puerto Rico, 2019)
      Improvements opportunities were found during the inspection process of recent manufactured lots in new manufacturing single-use technology, which was validated due to expected increase in product demand. An increase ...

    • Parts Washer Filling Load Optimization 

      Torres Rodríguez, Nilsa (Polytechnic University of Puerto Rico, 2020)
      Parts washers are used in new manufacturing and remanufacturing processes; they are designed to clean, degrease and dry bulk loads of small or large parts in preparation for assembly, inspection, surface treatment, ...

    • Past Due Reduction on 37mm Syringe Filters Manufacturing Line 

      Miralles, Alejandro (Polytechnic University of Puerto Rico, 2021)
      In Pall Life Sciences Puerto Rico, the past due on the 37mm manufacturing line was at $262,000 and continues increasing. The root cause for this issue is due to a mix of material shortage and customer demand increase. After ...

    • Patillas Dam Failure Analysis Modeling Using HEC-HMS, HEC-RAS Simulation Programs and Geographic Information System 

      Negrón Alfonso, Carlos A. (Polytechnic University of Puerto Rico, 2015)
      Carlos Negron Alfonso, Master’s in Civil Engineering Candidate, in cooperation with the Final Project conducted a Dam Breach Analysis for the Patillas Dam. This hydrologic and hydraulic study will assess the potential ...

    • Performance @ppraisal: Using Empirical Data to Evaluate Job Performance 

      Aponte-Lucena, José A. (Polytechnic University of Puerto Rico, 2010)
      The Performance @ppraisal is a threetier web application implemented in the U. S. Probation Office for the District of Puerto Rico to evaluate the job performance of their staff using empirical data extracted from ...

    • Performance Evaluation in SQL Server 

      Hidalgo Lorenzo, Simonely (Polytechnic University of Puerto Rico, 2021)
      Adatabase table with millionsof rowscould take a long time to retrieve, insert, update,and delete data. The evaluationin thispaperconsists of create indexes, apply normalization process, and create surrogate key to improve ...

    • Performance Evaluation System Web-Application 

      González Hernández, Joselyn (Polytechnic University of Puerto Rico, 2012)
      Abstract - This report is focused on explaining the aim of the web tool Performance Evaluation System in an enterprise environment. We will have details of why the decision was taken to design and develop a tool with the ...

    • A Personal Health Monitoring and Emergency Assistance Mobile Application 

      Rosario Colón, Jonathan D. (Polytechnic University of Puerto Rico, 2023)
      As digital technology continues to advance; new opportunities arise for enhancing emergency response and health management. The Be Safe mobile application focuses on identifying these opportunities and leveraging today's ...

    • Phosphate Waste Reduction Initiative 

      Rivera, Edgardo L. (Polytechnic University of Puerto Rico, 2013)
      Budget Waste Expense increased by more than 20% due to incremental phosphate waste (PHOW) during new product lot campaign at Amgen Manufacturing Limited. This constant PHOW increase was pointing toward a possible root cause ...

    • Photogrammetry and Point Cloud Modeling with the Incorporation of Micro-Drones for Web Mapping Applications 

      Nieves, Efraín A. (Polytechnic University of Puerto Rico, 2015)
      Drones and Micro-Drones have played a major role in homeland security and various divisions of the Department of Defense. Needless to say, this technology has passed from military hands to the average citizen. Some may ...

    • Physical and Infrastructure Security IT 

      Ramos Santa, Carlos H. (Polytechnic University of Puerto Rico, 2014)
      This article summarizes all of the important aspects to consider when managing physical security and IT infrastructure issues. To include natural disasters, environmental, technical and threats caused by human interaction ...

    • Piedras Blancas Landslide: Mitigation Works 

      Rendón Ferrer, Janet (Polytechnic University of Puerto Rico, 2009)
      Abstract - The Puerto Rico Highway and Transportation Authority has conducted since the 1980s several geotechnical investigations about the Piedras Blancas Landslide in the Municipality of San Sebastian. This landslide has ...

    • Plan de Integración de Diversas Fuentes Alimenticias en la Escuela Puerto Rico Christian School 

      Oliveras Rodríguez, Jonathan (Polytechnic University of Puerto Rico, 2022)
      Este proyecto utiliza la metodología Lean Six Sigma para añadir diferentes fuentes de alimentos en un plantel escolar. El proceso consta en tomar en cuenta las fuentes alimenticias actualmente dentro ...

    • Plan de mejora para la identificación, adquisición, almacenamiento y control de las piezas de repuesto utilizadas en los equipos de producción y planta física 

      Cruz Rodríguez, Ivelisse (Polytechnic University of Puerto Rico, 2013)
      La necesidad de implementar un sistema robusto de piezas de repuesto es fundamental para la compañía, ya que el tiempo de parada por falta de piezas de repuesto es muy costoso. Por tal razón se trabajó con urgencia un ...

    • Plan de mejoras de procesos en la creación de ambientes de desarrollo y producción 

      Santana Jorge, José (Polytechnic University of Puerto Rico, 2020)
      En el 2018, la empresa Seguros de Puerto Rico (SPR) obtuvo una clasificación 4.5 estrella de una agencia federal reguladora del servicio de los planes de salud en los Estados Unidos. Para 2019, SPR tuvo una drástica ...

    • Plan Estratégico de Ventas de Piezas y Equipos para una Compañía 

      Miranda Santiago, Angel R. (Polytechnic University of Puerto Rico, 2015)
      El propósito de este artículo es demostrar la importancia de las ventas en un lugar de trabajo. Como parte de esto se presenta un ejemplo de una compañía la cual su meta principal es lograr ventas día tras día. Además ...

    • Plan para reducir errores de estimados en la factura de la AEE 

      Pacheco Velázquez, José L. (Polytechnic University of Puerto Rico, 2012)
      En este proyecto se desarrolla un plan estratégico priorizado, para reducir las ineficiencias en los procesos administrativos, tales como la medición y facturación. El sistema de lectura de los contadores de la Autoridad ...