Manufacturing Competitiveness: Envíos recientes
Mostrando ítems 141-160 de 278
-
Implementación de un Sistema de Control de Inventarios en el Almacén de Mantenimiento de un Complejo de Apartamentos
(Polytechnic University of Puerto Rico, 2019)Este estudio propone un sistema de control de inventario que mejora la gestión de compras y organización de artículos de mantenimiento para el complejo de apartamentos. Específicamente: (1) diagnosticar el proceso ... -
Mejorar la Eficiencia en el Laboratorio Químico de una Farmacéutica a través de Aplicaciones de Metodología de Calidad
(Polytechnic University of Puerto Rico, 2019)Los laboratorios son de suma importancia, no solo en las escuelas y universidades; también lo son para las investigaciones y las farmacéuticas. Estos son los encargados de asegurar la calidad de sus productos. Los ... -
Lean Six Sigma Application to reduce cycle time in the waiting process for medical attention in patient with green categorization in adult emergency area in Hospital X
(Polytechnic University of Puerto Rico, 2010)The service area is one of the healthcare industries area that are in continuous search to optimize their process in order to provide a quality service to their customer (patient). In order to provide a total to quality ... -
Process Optimization by Implementing Lean Six Sigma in an Optical Manufacturing Laboratory
(Polytechnic University of Puerto Rico, 2010)The Design Project intends to be implemented in an Optical Manufacturing Laboratory. This laboratory is located at Mayagüez with the purpose of distributing ophthalmic lenses to different optical centers around the ... -
The Effect of the Vaporized Hydrogen Peroxide Residues in a Trypticase Soy Agar Plates for a New Barrier Isolated Syringe Filling Machine
(Polytechnic University of Puerto Rico, 2011)This study has been performed to evaluate the feasibility and adequacy of the Trypticase Soy Agar (TSA) plates in promoting growth after being exposed to Vapor Phase Hydrogen Peroxide (VPHP) decontamination cycle. This ... -
Use of Experimental Design for the Characterization of a Depyrogenation Machine
(Polytechnic University of Puerto Rico, 2010)Depyrogenation tunnel are used in pharmaceutical filling lines to sterilize glass containers before they are aseptically filled. These tunnels use unidirectional hot air at temperatures up to 350°C and can be used to ... -
Evaluation of the Effects of Gas Plasma test in a Tangential Flow Filter
(Polytechnic University of Puerto Rico, 2013)In this article you will see the combination of two technologies that produce an efficient product. One of the productions of the new form is the separation and filtration combined by retaining a plasma gas treatment. ... -
Statistical Analysis for the Development of a Mathematical Model for Liquid Phase Color Reproduction
(Polytechnic University of Puerto Rico, 2009)Abstract - This study aims to develop a mathematical model, capable to give a receipt of the dies concentrations to be used to develop a desire color. The model helps to minimize, and in some cases eliminate, the trial and ... -
Estudio de los Aspectos Ergonómicos en Laboratorios de Control de Calidad en Industrias Farmacéuticas
(Polytechnic University of Puerto Rico, 2009)Abstracto - El objetivo de esta investigación es conocer, cuan efectivo son los diseños ergonómicos en laboratorios de control de calidad de las industrias farmacéuticas. En esta investigación se realizó una evaluación de ... -
The Increase of Machine Utilization, using SMED, a Lean Manufacturing Tool
(Polytechnic University of Puerto Rico, 2013)In this project we will see the application of SMED (Single Minute Exchange Dye) a Lean Manufacturing tool in the Medical Device Industry, and how it helps to reduce the time of changeover in a machine. One of the benefits ... -
Validation Analysis of a Plastic Shrinkage Process after an Injection Molding Operation
(Polytechnic University of Puerto Rico, 2013)A validation process is essential during the start up of a new mold to ensure that the product will fulfill the function for which it was created. One common problem for production is finding the right parameters to ... -
Improve the Cycle Time of Stat Testing in Quality Control Laboratory Applying Kaizen Analysis
(Polytechnic University of Puerto Rico, 2013)Quality Control Laboratory of Biopharma Company was selected for develop a design project, using the technique of Kaizen Project. Manufacturing area of Biotech Company produces a biological product. Biologic Bulk ... -
Development of Vaporized Hydrogen Peroxide (VHP) Decontamination Cycle for a Syringe Isolator
(Polytechnic University of Puerto Rico, 2009)Abstract - A parenteral syring filling line inside a closed cabin isolator was installed in an existing manufacturing space. To increase sterility assurance the isolator must be effectively biodecontamined by means of Vapor ... -
Regeneración de Solventes Utilizados en los Procesos de Manufactura y sus Posibles Usos como Combustibles Alternos
(Polytechnic University of Puerto Rico, 2013)En este proyecto investigativo se examina la posibilidad de alcanzar beneficios económicos mediante la maximización de sustancias consideradas como desperdicios para algunas compañías. Debido a la diversidad ... -
Development of General Guidelines for the Pharmaceutical Manufacture Company Reaction to a Consent Decree Emitted by the Federal Drug Administration (FDA)
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ Consent Decrees have been very popular lately. The consent decree mandates that a company start initiating change, and that change is usually associated with the way the company is manufacturing a product; and, ... -
Optimization of On-Line Automated Dissolution System for Solid Dose Control Release Tablets
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ An optimization of an automated dissolution system for control release tablets has been accomplished by the implementation of several variables using Six Sigma tools. Variables under evaluation includes: filter ... -
Aplicación del “Right First Time (RFT)” en un Proceso de Documentación para una Industria Farmacéutica
(Polytechnic University of Puerto Rico, 2013)La presente investigación se llevó a cabo con el objetivo de evaluar las alternativas para mejorar el proceso de manejo de documentos en la industria farmacéutica. Las regulaciones de la FDA hacen que sea necesario que ... -
Continuous Improvement in the Retention and Employment Placement – Link Between Both Processes
(Polytechnic University of Puerto Rico, 2013)For the last decade, the socialeconomic factors as violence, underground economy, the poverty level of living, high unemployment, generations depending on subsidies fund from the United States, has negatively impacted ... -
Increase of Manufacturing Line Capacity using Lean Manufacturing on a Medical Device Company
(Polytechnic University of Puerto Rico, 2013)The competition between Medical Devices companies is increases every day. Many medical devices companies are marketing products that compete between each other. They challenged to obtain long term contracts to supply ... -
Reducción en el Tiempo de un Proceso de Esterilización en un Tanque para la Manufactura de un Producto Biológico
(Polytechnic University of Puerto Rico, 2013)Con el propósito de reducir costos en producción asociados a tiempos de espera, con este trabajo evaluaremos el proceso de esterilización de un tanque fijo. Se revisará si es posible reducir el tiempo de exposición de ...