Auflistung Manufacturing Engineering nach Titel
Anzeige der Dokumente 303-322 von 344
-
Space Improvement in a Veterinary Pharmaceutical Warehouse
(Polytechnic University of Puerto Rico, 2012)Abstract – This project design presents and analyze how a space problem was solved, inside a veterinary pharmaceutical warehouse, located in Panama City, Panama Republic. This veterinary pharmaceutical facility needs more ... -
Spinal Cord Stimulator Glassed Feedthrough Improvement Using DMADV Methodology
(Polytechnic University of Puerto Rico, 2019)Chronic pain is an illness that affects more than 1.5 billion humans worldwide and can affect daily activities leading up to disability and despair. The goal of treating chronic pain is to reduce pain and improve ... -
The Stabilization of an Atmosphere of Plasma Based Carbon Dioxide at Atmospheric Pressure
(Polytechnic University of Puerto Rico, 2014)Some reasons are discussed for the stabilization of a glow discharge at atmospheric pressure which was attained by controlling the following three conditions: the use of a highfrequency source, the use of gas for dilution ... -
Stack and Bond Automation for Rotor and Stator Cores Manufacturing Application
(Polytechnic University of Puerto Rico, 2013)The manufacturing process for the core of the electric motors or electric generators starts with the stacking process of core. The main objective in this project is to reduce the manufacturing time and improve the ... -
Standardization of Cable Service Installation Orders Assignment Process in Rural and Suburban Areas
(Polytechnic University of Puerto Rico, 2015)One of the great benefits of Lean Manufacturing is its diversity of applications beyond the size and type of industry. In this article lean concept alternatives are used under the DMAIC methodology as a systematic ... -
Standardizing the Manufacturing Operation of a Multipurpose Cleaner in 32-Ounce Bottles in Order to Control the Process
(Polytechnic University of Puerto Rico, 2019)With the fast paste life we are currently living, manufacturers are always looking for innovative ways to simplify products, including cleaning and household products. With an allpurpose cleaner, there is no need to buy ... -
Statistical Sampling Plan Alternatives for Seal Strength Testing on Pre-sealed Tyvek® Bags
(Polytechnic University of Puerto Rico, 2022)Seal strength is an important quality of sterile barrier systems used for Pharmaceutical and Medical Device Packaging operations, and subject to strict quality control industry-wide. This study evaluated the feasibility ... -
A Strategically Systematic Approach to Acquire Improvement Project Prospects in a Medical Device Company
(Polytechnic University of Puerto Rico, 2012)Abstract - Numerous companies begin their manufacturing improvement journey lacking an overall game plan. This results in a not strategized and structured improvement implementation with results less than optimal and if ... -
Strategy for the Implementation of Raman Technology in the Raw Material Incoming Area
(Polytechnic University of Puerto Rico, 2014)State of the art new technology to identify raw materials is available for the manufacturing industries to improve and accelerate the identification process. This document will cover the Raman technology, theory ... -
Structured Approach for Compliance Determination of FDA Regulated Tablet Compression Process
(Polytechnic University of Puerto Rico, 2010)Tablets are the most popular unit dosage form used by the Pharmaceutical Industry to provide health treatment to patients in the United States. It is important to control process critical parameters (variables) such ... -
Suppliers Information Exchange Process Optimization
(Polytechnic University of Puerto Rico, 2018)The emphasis of this research project is to reduce the processing time for supplier’s requests for change and/or information (RC/I), a tool utilized to request information and/or change in response to technical or ... -
Surgical Technologies Clean Room Lines Capacity Improvement
(Polytechnic University of Puerto Rico, 2015)In today’s competitive market, medical device manufacturing companies need to continuously innovate their products and process in order to maintain a leader position on the medical devices industry. Quality and Cost ... -
System Performance Laboratory Optimization
(Polytechnic University of Puerto Rico, 2019)This project seeks to optimize the efficiency of a medical device laboratory process applying tools of the Lean Six Sigma methodology and eliminating non-value activities to complete transfer of a new product avoiding ... -
Temperature and Speed Analysis of Skinetta Banding Machine and Heat Tunnel Conveyor at Chocolate Packaging Line
(Polytechnic University of Puerto Rico, 2014)Food and Drug Administration (FDA) regulates pharmaceutical industries. With this regulations industries are forced to maintain a high quality standard for their product. Novartis manufactures OTC products as well as ... -
Temperature System Calibration Process Improvement and Risk Mitigation
(Polytechnic University of Puerto Rico, 2023)The project's main objective was to update the software that performed the data collection for the Systems Calibration process. It held the highest priority in the facility's Risk Registry due to the obsolete computers. ... -
Time Cycle Reduction of the Scrap Process in a Medical Device Company
(Polytechnic University of Puerto Rico, 2011)As part of an assessment performed for continuous improvement it was identified that the Nonconformance (NC) Timeline metric shows 23% over the goal of 30 days closure. From the list of NC Reports (NCR) impacting this ... -
Time optimization for service provider operational performance
(Polytechnic University of Puerto Rico, 2018)A DMAIC methodology was carried out to identify and improve two processes within a Service Providing Company. These processes where the Quote redaction process and the Field Work Time Management. A bottle neck ... -
TiMesh Product Transfer to MPROC Humacao
(Polytechnic University of Puerto Rico, 2020)The objective of this project is to ensure that the machining, electropolishing, product testing and packaging processes; manufacturing control methods; and product specifications are properly installed, qualified and ... -
Titanium Grade 36 to Titanium Grade 1 weld on Implantable Cardioverter Defibrillator (ICD)
(Polytechnic University of Puerto Rico, 2016)Finding cost reduction on medical devices production, a new Feedthrough array design will be implemented in an Implantable Cardioverter Defibrillator, incorporating glassed Feedthrough of Titanium Grade 36 in a ferrule ... -
Tracking System for Useful Life of an Insulin Pump Motor
(Polytechnic University of Puerto Rico, 2016)This research project was focused in the implementation of a Tracking System for the useful life of an infusion pump’s motor. This component is a sub-assembly of the infusion pump which is used to deliver fluids into ...