Auflistung Manufacturing Engineering nach Erscheinungsdatum
Anzeige der Dokumente 81-100 von 344
-
Automation of Final Test Station in the Manufacturing Process of a Medical Device Facility
(Polytechnic University of Puerto Rico, 2013)The IS-4 Final Test Station will incorporate the entire test needed to assure that the leads that are manufactured in Boston Scientific are built with a high quality standard that will assure the safety of the patient. ... -
Increase Productivity in a Manufacturing Department of a Medical Devices Company
(Polytechnic University of Puerto Rico, 2013)In all companies the productivity is a very important metric because is the way to make sure that we optimize our resources and time. Is the way to measure if we are manufacturing as expected and with the required ... -
Optimization of the Qualification Process to Improve Products and Services in a Telecommunication Industry
(Polytechnic University of Puerto Rico, 2013)This design was based on standardizing the qualification process, reduce the time to increase production and improve the process of updating the information on the server. The Kaizen event helped to solve different ... -
Improving Customer Satisfaction through Property Operations in Hospitality Industry
(Polytechnic University of Puerto Rico, 2013)Corrective Maintenance used to be the most common course of action in both service and manufacturing industry. Even though the new tendencies are moving towards Preventive Maintenance, many industries are stuck in the ... -
Cycle Time Reduction of a Crystallization Process in a Chemical Plant
(Polytechnic University of Puerto Rico, 2013)Estimates indicate that Diabetes will increase affecting the population worldwide in the future. To mitigate current and future demand, Barceloneta’s Factory 2 needs to improve the active pharmaceutical ingredient (API) ... -
Anti-inflammatory Drug Elution Rate Variability Reduction
(Polytechnic University of Puerto Rico, 2013)This project was focused in the Drug Elution Rate Variability of an Anti-inflammatory Drug used in a Medical Device Company. The project is based on the manufacturing and bonding process of a DXA Drug Collar that is a ... -
Potable Water Quality Improvement in a Water Filtration Plant Facility
(Polytechnic University of Puerto Rico, 2013)The processes used for treatment in water plants depend on the quality of the source and the desired quality of the water. The chemicals selected for the treatment depend on the effectiveness to obtain the desired ... -
Margin Increase as a Function of Quote Precision Optimization for Packaging Automation Projects and Services
(Polytechnic University of Puerto Rico, 2013)This document describes design and development of quote optimization process using margin increase as a critical process response. It analyzes the aspects of estimating project or service in the packaging machinery ... -
Reducción en el Desperdicio de Material en un Proceso de Impresión Flexográfica
(Polytechnic University of Puerto Rico, 2013)Las compañías han optado por implementar técnicas de mejoramiento que ayuden a eliminar ineficiencias en sus procesos para reducir costos y ser más competentes dentro del mercado. La materia prima es el componente ... -
Dermabond Automation- Mini Swab Assembly Machine
(Polytechnic University of Puerto Rico, 2013)This project covers the development, design and process control of Dermabond Mini Swab Assembly Machine. The project focused primarily on a solution based on the automation and process control application. This report ... -
Reduction of Cosmetic Defects Due to Criteria Misalignment at a Medical Device Manufacturing Line Using DMAIC Methodology
(2013)For the last few years, the economy of Puerto Rico has been negatively affected, increasing the operational cost of the industries in the Island. The Pharma / Medical Device industry is not excluded of this situation. ... -
Puerto Rico Water and Sewer Service Calibration Operation Cost Reduction
(Polytechnic University of Puerto Rico, 2013)For the last few years, the economy of Puerto Rico has been negatively affected, increasing the operational cost of the industries in the Island. In addition, regulatory agencies have been increasing their requirements ... -
Continuous Improvement in a Warehouse of Short Bark Industries
(Polytechnic University of Puerto Rico, 2013)In the company Short Bark Industries is manufacturing military clothing and accessories. This company has a problem in the organization and excess inventory in the warehouse. For this they need to implement two Lean ... -
Evolutionary vs. Revolutionary: a Snap Shot of the Current Tendencies in Pharmaceutical Industry and the Impact of Process Analytical Technology and Continuous Manufacturing Processes
(Polytechnic University of Puerto Rico, 2013)Food and Drug Administration (FDA) challenges the pharmaceutical industry to innovate itself and introduce ever higher quality standards through the use of technology. Development of continuous manufacturing systems ... -
Feasibility Evaluation and Quality Risk Management (QRM) for the Design of Automated Warehouse, Shipping and Transportation Operations
(Polytechnic University of Puerto Rico, 2013)Distributions center such as warehouse are important stage of storing materials, goods or products. Warehouses are important because they are created to store adequately the products as their main purpose. Warehouses ... -
Risk Prevention in Syringe Filling Line in a Pharmaceutical Manufacturing Plant
(Polytechnic University of Puerto Rico, 2013)Risk prevention in syringe filling line can be achieved through the implementation of “Defense in Depth” concepts. Defense in Depth is based on the integration of 3-layers of operational controls which are Equipment, ... -
Finished Goods Failure Reduction in a Wound Closure Medical Device Product Family
(Polytechnic University of Puerto Rico, 2013)A corrective action and preventive action plan was developed to address the increase of Finished Goods failures in a wound closure medical device product family. Following a DefineMeasure-Analyze-Improve-Control Six ... -
Quality Risk Management for the Evaluation of Potable Water Final Rinse during the Cleaning Process of Granulator Jilter Bags
(Polytechnic University of Puerto Rico, 2013)The objective of this article is to describe the application of Quality Risk Management (QRM) approach to assess and manage the risk associated to the impact of using Potable Water during the final rinse process used to ... -
Application of Lean Six Sigma Methodology to Optimize Fixation Device Assembly Line in the Medical Devices Industry
(Polytechnic University of Puerto Rico, 2013)The research project was focused in the line optimization of a Fixation Device assembly line in a Medical Devices Industry. The Fixation Device is called ProTack™. The Covidien Company is the manufacturer located in ... -
Quality Improvement of a Paint and Restoration Process in the Remanufacturing Industry
(Polytechnic University of Puerto Rico, 2013)In a remanufacturing operation it was required to improve the first pass yield of a Paint and Restoration process that handles plastic and metallic parts. The raw material for the process is recovered from used household ...