Listar Manufacturing Engineering por autor "Nieves Castro, Rafael A."
Mostrando ítems 21-40 de 121
-
Design Methodology of Clean Room Overtime Reduction in a Medical Device Plant
Pabellón Díaz, Yaxaira E. (Polytechnic University of Puerto Rico, 2015)According to the last year data in a medical device company, the packaging shipped units are increasing by the last eight months. The packaging clean room headcount are generate too much overtime affecting the finance ... -
Design Methodology of Production Improvement at “X Hydroponic Farm”
Quiñones Rodríguez, Jan (Polytechnic University of Puerto Rico, 2016)According to “X Hydroponic Farm” facilities, a 40 x 60 square feet farm, with a capacity of producing 750 plants weekly; and actual production rate of 250 plants a week, is expecting a demand increase of approximately 60%. ... -
Design of a Brewery Manufacturing Process for a Small Starting Scale
Cardona Vélez, Wilfredo J. (Polytechnic University of Puerto Rico, 2014)In this paper will be about the process and requirement to create a facility for brewery in order to implement Pilot Plant services. This project has a scope of preparing a Pilot plant focused in the opportunity of ... -
Design Project for Process Improvement of the Manufacturing of Electrode Ring –Monolithic Controlled Released Devices (MCRDs)
Fernández Meléndez, Juan M. (Polytechnic University of Puerto Rico, 2021)Medtronic Rice Creek Pharmaceutical Operations at Fridley, Minnesota currently build the Electrode Ring, Monolithic Controlled Released Device (MCRD) assembly which is sent to Medtronic Villalba ... -
Determination of In-Processing Manufacturing Impact into Elution Rate of Drug Eluting Steroid Collars
Figueroa Camuñas, Julio C. (Polytechnic University of Puerto Rico, 2012)Abstract - The Food and Drug Administration provides regulations for combination products. The medical device industry needs to comply with these regulations specifically in products containing drug. One of the many ... -
Development and Optimization for Generic Capsule Solid Oral Dosage Formulation Using Quality by Design (QbD) Principles
Rodríguez Cortés, David E. (Polytechnic University of Puerto Rico, 2015)Traditionally, the development and formulation of generic drugs has focused on the delivery of the product to the next phase of clinical study making the formulation design iterative and empirical. Furthermore, ... -
Development of an Automated System for the Monitoring and Control pH and Conductivity of a Dampening Solution
León Alvarez, Ivelisse (Polytechnic University of Puerto Rico, 2012)The influence of dampening solution parameters on the final printing quality has been remarked on many researches during the last decades. There are many parameters that need to be controlled on a fountain solution as pH, ... -
Development of Dual Drugs with Coated Microneedles
Pérez Figueroa, Alexander G. (Polytechnic University of Puerto Rico, 2022)Coated microneedles have been shown to deliver biopharmaceuticals and drugs into the skin in a minimally invasive manner. To increase patient acceptance, smaller needle diameters and lower insertion ... -
Diseño de Procesos de Mejora para obtener un “PMA” del FAA
Galloza Avilés, Antonio (Polytechnic University of Puerto Rico, 2016)Actualmente existe mucha competencia entre compañías que realizan servicios similares, haciendo imperativo el buscar formas para poder mejorar los procesos de los productos que las mismas ofrecen, haciéndolos más ... -
Effective Work Order Requests And Scheduling Tool Design for Maintenance Jobs
Vélez Arias, Sergio A. (Polytechnic University of Puerto Rico, 2020)A company located in Puerto Rico, which provides maintenance services and project management for various private properties, identified a problem of delays in maintenance work order response time and completion of ... -
Electronic Report Improvement Using Six Sigma DMAIC Tools
Pérez Acosta, Javier A. (Polytechnic University of Puerto Rico, 2011)Abstract - The purpose of this project is to evaluate the application and benefits of Six Sigma tools to electronic reporting. In this particular case the DMAIC (Define, Measure, Analyze, Implement and Control) method is ... -
Electrospinning Process Capacity Optimization In Medical Device Industries
Rivera González, Freddie Joel (Polytechnic University of Puerto Rico, 2021)As part of the manufacturing cost reduction initiatives that support 2021 Operational Excellence Projects to promote continuous improvement on medical device industries; the Electrospinning (E-spin) process was found with ... -
Enhance Annual Product Review Process at Pharmaceutical Company in Puerto Rico
Rivera Martínez, Lynnette (Polytechnic University of Puerto Rico, 2014)Annual Product Review (APR) is a requirement from Good Manufacturing Practices (cGMP) under the FDA (Food and Drug Administration) and European Medicine Agency (EMEA). The EMEA refers to Annual Product Quality Review ... -
Enhancing Aerospace Systems Performance with Agile Framework
Maysonet Alicea, Luis Angel (Polytechnic University of Puerto Rico, 2023)This paper presents a case study on implementing Agile methodology in aerospace engineering, with a focus on an engine design project. The aim was to transition to a new SysML program called Cameo, to enhance team ... -
Establishing Procedures for “Turnbacks” in the Classification Center
Torres Mercado, Jean C. (Polytechnic University of Puerto Rico, 2023)The research project is aimed to investigate the procedures for “turnbacks” that transpire on the system’s repository of a global trade department for X Company. Turnbacks are errors that delay the classification process ... -
Final Device Quality Control Unit Operation Optimization
Rodriguez Cales, Ashley (Polytechnic University of Puerto Rico, 2020)With the intent of achieving cost reduction initiatives, the Quality Control Unit operation regarding the final device release was identified as a labor cost opportunity. Through kaizen events done across site, it was ... -
First Pass Yield Metric Implementation for Validation Documents
Armbruster Santiago, Eric (Polytechnic University of Puerto Rico, 2015)A regulatory compliance contractor in the life sciences industry desires to be distinguished from its competitors in terms of the quality of their services. To make it possible, the company intends to improve the ... -
Generic Methodology for the Implementation of Automated Device Management Systems
Ocasio, Wendell (Polytechnic University of Puerto Rico, 2011)Abstract - Organizations establish maintenance programs to ensure instruments and other devices are maintained, properly configured, and periodic calibrations are performed. Typically, a combination of computerized maintenance ... -
Guideline for the Development of a Capable Training Program for New Hire Employees in the Design Area of an Aerospace Industry in Puerto Rico
Ayala Román, José A. (Polytechnic University of Puerto Rico, 2012)Abstract - The aerospace industry is very sophisticated since their products and services needs to be in compliance with the highest levels of quality. Since currently this type of industry is new in Puerto Rico most of ... -
How To Use Solar Energy Conversion Equipment Effectively To Reduce House’s Power Energy Bill
Martínez Ocasio, Julio C. (Polytechnic University of Puerto Rico, 2020)Access to affordable electricity price is one of the major factors that causing socioeconomic problems in the island of Puerto Rico. At the present, most of the clients require the service from the only Power Company ...