Listar Manufacturing Engineering por título
Mostrando ítems 308-327 de 344
-
Standardizing the Manufacturing Operation of a Multipurpose Cleaner in 32-Ounce Bottles in Order to Control the Process
(Polytechnic University of Puerto Rico, 2019)With the fast paste life we are currently living, manufacturers are always looking for innovative ways to simplify products, including cleaning and household products. With an allpurpose cleaner, there is no need to buy ... -
Statistical Sampling Plan Alternatives for Seal Strength Testing on Pre-sealed Tyvek® Bags
(Polytechnic University of Puerto Rico, 2022)Seal strength is an important quality of sterile barrier systems used for Pharmaceutical and Medical Device Packaging operations, and subject to strict quality control industry-wide. This study evaluated the feasibility ... -
A Strategically Systematic Approach to Acquire Improvement Project Prospects in a Medical Device Company
(Polytechnic University of Puerto Rico, 2012)Abstract - Numerous companies begin their manufacturing improvement journey lacking an overall game plan. This results in a not strategized and structured improvement implementation with results less than optimal and if ... -
Strategy for the Implementation of Raman Technology in the Raw Material Incoming Area
(Polytechnic University of Puerto Rico, 2014)State of the art new technology to identify raw materials is available for the manufacturing industries to improve and accelerate the identification process. This document will cover the Raman technology, theory ... -
Structured Approach for Compliance Determination of FDA Regulated Tablet Compression Process
(Polytechnic University of Puerto Rico, 2010)Tablets are the most popular unit dosage form used by the Pharmaceutical Industry to provide health treatment to patients in the United States. It is important to control process critical parameters (variables) such ... -
Suppliers Information Exchange Process Optimization
(Polytechnic University of Puerto Rico, 2018)The emphasis of this research project is to reduce the processing time for supplier’s requests for change and/or information (RC/I), a tool utilized to request information and/or change in response to technical or ... -
Surgical Technologies Clean Room Lines Capacity Improvement
(Polytechnic University of Puerto Rico, 2015)In today’s competitive market, medical device manufacturing companies need to continuously innovate their products and process in order to maintain a leader position on the medical devices industry. Quality and Cost ... -
System Performance Laboratory Optimization
(Polytechnic University of Puerto Rico, 2019)This project seeks to optimize the efficiency of a medical device laboratory process applying tools of the Lean Six Sigma methodology and eliminating non-value activities to complete transfer of a new product avoiding ... -
Temperature and Speed Analysis of Skinetta Banding Machine and Heat Tunnel Conveyor at Chocolate Packaging Line
(Polytechnic University of Puerto Rico, 2014)Food and Drug Administration (FDA) regulates pharmaceutical industries. With this regulations industries are forced to maintain a high quality standard for their product. Novartis manufactures OTC products as well as ... -
Temperature System Calibration Process Improvement and Risk Mitigation
(Polytechnic University of Puerto Rico, 2023)The project's main objective was to update the software that performed the data collection for the Systems Calibration process. It held the highest priority in the facility's Risk Registry due to the obsolete computers. ... -
Time Cycle Reduction of the Scrap Process in a Medical Device Company
(Polytechnic University of Puerto Rico, 2011)As part of an assessment performed for continuous improvement it was identified that the Nonconformance (NC) Timeline metric shows 23% over the goal of 30 days closure. From the list of NC Reports (NCR) impacting this ... -
Time optimization for service provider operational performance
(Polytechnic University of Puerto Rico, 2018)A DMAIC methodology was carried out to identify and improve two processes within a Service Providing Company. These processes where the Quote redaction process and the Field Work Time Management. A bottle neck ... -
TiMesh Product Transfer to MPROC Humacao
(Polytechnic University of Puerto Rico, 2020)The objective of this project is to ensure that the machining, electropolishing, product testing and packaging processes; manufacturing control methods; and product specifications are properly installed, qualified and ... -
Titanium Grade 36 to Titanium Grade 1 weld on Implantable Cardioverter Defibrillator (ICD)
(Polytechnic University of Puerto Rico, 2016)Finding cost reduction on medical devices production, a new Feedthrough array design will be implemented in an Implantable Cardioverter Defibrillator, incorporating glassed Feedthrough of Titanium Grade 36 in a ferrule ... -
Tracking System for Useful Life of an Insulin Pump Motor
(Polytechnic University of Puerto Rico, 2016)This research project was focused in the implementation of a Tracking System for the useful life of an infusion pump’s motor. This component is a sub-assembly of the infusion pump which is used to deliver fluids into ... -
Training Process Standardization in the Configuration of a Mobile Marketing Tool using PDCA Methodology
(Polytechnic University of Puerto Rico, 2013)For the last few years, mobile marketing has become a very powerful tool to improve business revenues. This is an extension of internet marketing, with more people spending time on their mobile devices and less in their ... -
Understand and Correct the Weight Variability in Cases
(Polytechnic University of Puerto Rico, 2016)Process variation in all manufacturing processes will reflect a manufacturing production losses since these variations reflect process waste. Understand process variations and process capabilities is a key factor when ... -
Use of Quality Management Tools to Improve the Operations of a Flag Production Company
(Polytechnic University of Puerto Rico, 2014)The objective of this research is to improve the operations of a Flag Production Company by the use of Quality Management techniques. Small companies have been struggling these days on being competitive against big ... -
Using Design of Experiments to Characterize the Design Space of “Like-for- Like” Packaging Equipment
(Polytechnic University of Puerto Rico, 2015)Industries with high volume demand tend to have various equipments that can perform the same task. Many of these tasks produce itemsthat in order to sample them would require destroying them. Validation is necessary ... -
Using Lean Methodology to Reduce Changeover Time in Packing Line
(Polytechnic University of Puerto Rico, 2012)Abstract - One of the metrics to measure efficiency in packing lines is Process Reliability (PR). It has been identified that the PR loss in packing Line X due to changeovers is 16%. The objective of this project is to use ...