• Particle detection tool for liquid product inspection machines 

      García Duprey, Angie Ly (Polytechnic University of Puerto Rico, 2019)
      Improvements opportunities were found during the inspection process of recent manufactured lots in new manufacturing single-use technology, which was validated due to expected increase in product demand. An increase ...
    • Parts Washer Filling Load Optimization 

      Torres Rodríguez, Nilsa (Polytechnic University of Puerto Rico, 2020)
      Parts washers are used in new manufacturing and remanufacturing processes; they are designed to clean, degrease and dry bulk loads of small or large parts in preparation for assembly, inspection, surface treatment, ...
    • Plc Modification for Fill and Close Stopping Sequence Improvement 

      Fernández Burgos, David A. (Polytechnic University of Puerto Rico, 2020)
      From November 2020 to January 2021, an analysis was made looking for the best way to increase the yield of the machines in charge of the dry process when making a contact lens. In this analysis, it was discovered that ...
    • Potable Water Quality Improvement in a Water Filtration Plant Facility 

      Hernández Rodríguez, Dori A. (Polytechnic University of Puerto Rico, 2013)
      The processes used for treatment in water plants depend on the quality of the source and the desired quality of the water. The chemicals selected for the treatment depend on the effectiveness to obtain the desired ...
    • Potting Process Improvement for Inductors 

      Correa Colón, Mario A. (Polytechnic University of Puerto Rico, 2015)
      During the last 20 years, X Aerospace Company has produced enormous gains due to a relentless focus on process in manufacturing, engineering and research and development. These margin increases came from many incremental ...
    • PPAP Process and Correlation Study for Vision Systems 

      Arevalo Mercado, John (Polytechnic University of Puerto Rico, 2021)
      The Production Part Approval Process (PPAP) is being adopted by Medical Device companies to qualify raw material. To standardized qualification processes between multiple supplies and help ...
    • PRM Operations Cores Cell Takt Time Kaizen 

      Moreau Sepúlveda, Armando (Polytechnic University of Puerto Rico, 2015)
      This article refers to, how UTAS handles the optimization of a CORE a cell in the manufacturing process. Companies have waste that can be reduce with an optimization of the manufacturing process. Steps to accomplish ...
    • Process Characterization of Thermal Bond Process 

      Carrillo Velez, Dayana M. (Polytechnic University of Puerto Rico, 2022)
      Process Characterization is a required step in the commercialization of a new product. The intent of this process characterization is to ensure that the Midjoint Thermal Bond manufacturing process delivers a consistent ...
    • Process Improvement for Client Status Report 

      Valentín Santiago, Marlen J. (Polytechnic University of Puerto Rico, 2016)
      During last year, customer service quality has been negatively affected, increasing document re-work and operational cost in the company. In order to improve the documentation development process the company plans ...
    • Process Optimization of Amine Reactions 

      Betancourt Negrón, Ninoshka (Polytechnic University of Puerto Rico, 2018)
      Ospira is an inhalation anesthesia manufacturing facility. The main products are Deramine and Dexoflurane. To produce these anesthetics, chemical reactions and distillation processes are required. For Deramine it ...
    • Process Standardization on Customers’ Requests for Infrastructure and Security Services 

      Nieves Zavala, Paulette (Polytechnic University of Puerto Rico, 2016)
      This research project focuses on the development of a Process Standardization for services requests of an Information Systems Consultant Company. The existing process is not ideal nor practical because of the time gap ...
    • Process workflow optimization and redesign for packaging line at a medical device company 

      Feliciano Granda, Ana Karina (Polytechnic University of Puerto Rico, 2018)
      This document describes the process of workflow optimization and redesign using Lean Six Sigma tools to better understand the Ivers Lee packaging lines (IL#1 and IL#2) issues and create alternatives to improve them. ...
    • Product Mix Analysis in Manufacturing Line 

      Mercado López, Josean (Polytechnic University of Puerto Rico, 2023)
      This research project was focused on the Product Mix Analysis of a Medical Device manufacturing line due to a customer complaint. A product mix is a manufacturing defect and is defined as a mix of components/ assembly ...
    • Product Monitoring Improvements Migrating from the Infinity Quality System to an Automatic Interface Data Collection 

      Sambolín Sierra, Christian Omar (Polytechnic University of Puerto Rico, 2016)
      This improvement project article is intended to demonstrate how a medical device company can improve its inspection process by developing an Automatic Data Transfer Platform migrating from a platform that does not ...
    • Production Improvement for Manufacturing Furniture Company 

      García Lugo, Arturo (Polytechnic University of Puerto Rico, 2020)
      This project was based on the laminating production improvement for a manufacturing furniture company. Basically, the process consists of the laminated production of wood materials. The lead time and ship dates of ...
    • Production Line Improvement Using DMAIC Tool in an Electrical Production Plant 

      Díaz Marrero, Jessuelly E. (Polytechnic University of Puerto Rico, 2010)
      Today, there is much competition between the manufacturers of electronics products. This creates a need for the manufacturers to develop processes that can supply the client demand within a required time and a specified ...
    • Puerto Rico Water and Sewer Service Calibration Operation Cost Reduction 

      Navarro Carrillo, Erica (Polytechnic University of Puerto Rico, 2013)
      For the last few years, the economy of Puerto Rico has been negatively affected, increasing the operational cost of the industries in the Island. In addition, regulatory agencies have been increasing their requirements ...
    • Purified Water SCADA System and Network Infrastructure Upgrade To a ArchestrA Virtual Platform 

      Duarte, Tatiana (Polytechnic University of Puerto Rico, 2012)
      Abstract ⎯ Pharmaceutical Manufacturing Industry struggles between maintaining a low cost manufacturing, meeting strict regulations and avoiding obsolescence in their systems. Implementing upgrades to the existing systems ...
    • Quality Assessment for the Evaluation of Sample Size Reduction for Continuous In-Process Data 

      Alomar Bermúdez, Carola E. (Polytechnic University of Puerto Rico, 2012)
      Statistical tests look for evidence that you can reject the null hypothesis and conclude that your program had an effect. With any statistical test, however, there is always the possibility that you will ...
    • Quality control plan for Puerto Rico electrical and power restoration project 

      Pérez Lorenzo, Zuleika (Polytechnic University of Puerto Rico, 2018)
      A year ago Puerto Rico was dark for more than 9 months. After Hurricane Maria struck, federal, local and private corporations were forced to update their strategies due to the intensity of the Category 4 storm. This ...