Buscar
Mostrando ítems 221-230 de 271
In-process Testing Redesign in Packaging Line of Oral Solid Dosage
(Polytechnic University of Puerto Rico, 2019)
Packaging process area request to
redesign the in-process testing to reduce waste and
increase the efficiency during the in-process testing
activities without increase in the defective unit
found by Quality during their ...
Process Optimization of Amine Reactions
(Polytechnic University of Puerto Rico, 2018)
Ospira is an inhalation anesthesia
manufacturing facility. The main products are
Deramine and Dexoflurane. To produce these
anesthetics, chemical reactions and distillation
processes are required. For Deramine it ...
Optimize Batch Transfer between Processing Tanks
(Polytechnic University of Puerto Rico, 2012)
Estimates indicate that Diabetes will increase affecting the population worldwide in the future. To mitigate current and future demand, Barceloneta’s Factory 2 needs to improve the MK-0431 manufacturing process. Several ...
Design and Implementation of Laser Marking with OCR/OCV Vision Inspection System
(Polytechnic University of Puerto Rico, 2018)
The laser marking process is aimed to
create a permanent identification and/or
descriptive information on the surface of metallic
spinal implants to provide full traceability for the
products being manufactured at ...
Medical Devices Industry versus Aerospace Industry
(Polytechnic University of Puerto Rico, 2017)
Manufacturing or production has been
characterized as one of the biggest growth areas of
economic sector. It is a very wide field, around about
13 categories of different manufacturing such as:
Construction, Electronics, ...
Lean Six Sigma: Process Improvement at Hospital X’s Emergency Department
(Polytechnic University of Puerto Rico, 2017)
The opportunity to establish and
outcome some frequently used industrial and
process engineering tools in a 28-bed, hospital
emergency department (ED), located in Puerto
Rico, was presented to CIRACET Corp. With ...
Water Efficiency Improvement Using DMADV Methodology
(Polytechnic University of Puerto Rico, 2017)
Water utility optimization using
manufacturing methodology to investigate ways we
can generate more revenue and a more efficient
service. Considering different types of
manufacturing process which could have a ...
Increased Efficiency for Compression Setup and Startup Processes
(Polytechnic University of Puerto Rico, 2017)
This research project is focused in the
Increased Efficiency for Compression Setup and
Startup Processes. The machine compressors are the
Table Press 3200i, it is a double sided rotary press
used to produce mono and ...
Generic Methodology for the Implementation of Automated Device Management Systems
(Polytechnic University of Puerto Rico, 2011)
Abstract - Organizations establish maintenance programs to ensure instruments and other devices are maintained, properly configured, and periodic calibrations are performed. Typically, a combination of computerized maintenance ...
Services Repair Optimization in a Subcontractor Company Applying Lean- 6 Sigma
(Polytechnic University of Puerto Rico, 2011)
Abstract ⎯ Increasing competition between industries forced their services to expand to other countries out of their territorial limits. Job cost, planning and quality are the keys to success. This project measured, ...