Auflistung Revista Politechnê nach Titel
Anzeige der Dokumente 49-68 von 285
-
Design of an Environmental Monitoring Program for a New Biotechnology Facility
(Polytechnic University of Puerto Rico, 2010)A new biotechnology facility in Puerto Rico is in need of an Environmental Program to ensure the stability of room conditions for the manufacturing of their products. This environmental baseline study provided documented ... -
Design of an experiment for injection blow molding
(Polytechnic University of Puerto Rico, 1994-12)This research was requested by the quality control engineer of a company manufacturing plastics products such as bottles and caps. These products are manufactured with polyethylene and polipropylene resin, using two molding ... -
Despacho económico considerando la distribución del margen de reserva en regulación
(Polytechnic University of Puerto Rico, 1992-12)This paper presents the concept of the regulating reserve margin in an economic dispatch by using the Lagrange method of undetermined multipliers. The regulating reserve margin is the amount of generation that should be ... -
Determination of interface roughness and its correlation in amorphous-silicon/ amorphous-germanium multilayers
(Polytechnic University of Puerto Rico, 1996-06)The importance of surfaces and interfaces of materials is increasing in many technological areas. In the microelectronic industry, for example, the J current trend is toward even faster and smaller electronic devices. ... -
Determination of soil strength parameters from unconfined compression testing on partially saturated soils
(Polytechnic University of Puerto Rico, 1996-12)The uneonfined compression test is used in most geotechnical studies to y -determine soil strength parameters. This test is recommended for fine cohesive > ^ soils with a degree of saturation of more than 90%. It has been ... -
Development of an Interactive Finite Element Analysis Program Within MS Windows 95 Environment
(Polytechnic University of Puerto Rico, 1999-06)The objective of this project was to develop a highly interactive, graphically oriented, special purpose Finite Element Analysis program, that utilizes the MS-Windows 95 environment as the Graphical User Interface (GUI). ... -
The development of my capstone design project
(Polytechnic University of Puerto Rico, 1995-06)This article is the result of my Capstone Design Project, which I started during the summer of 1994. The main purpose of this course is to expose us to the ever changing and challenging world of the engineering design work. ... -
Devoción de las olas de Mónica Manrique de Lara. Isla Negra Editores / Crátera Editores, 2020
(Polytechnic University of Puerto Rico, 2022)Reseña del primer poemario de la escritora granadina Mónica Manrique de Lara por Miguel Ángel Real. -
Dielectric Spectroscopy Applied to Porcine Tissues
(Polytechnic University of Puerto Rico, 2019)This paper discusses the characteristics of the dielectric properties: permittivity (E), conductivity (ó) and dielectric loss (E") of a porcine tissue. The main objective is to measure and identify the dielectric properties ... -
Dinámica de redes y el modelo del ión rígido en cristales del tipo R2MX6
(Polytechnic University of Puerto Rico, 1992-12)The theory of lattice dynamics in the harmonic approximation and the Born and Huang's rigid-ion model are used to study ionic crystals of R2MX6 type with antifluorite structure. The rigid-ion model expresses the potential ... -
Diseño computadorizado de la carga térmica para el acondicionamiento de aire en Puerto Rico (AIRPAK 123 TM)
(Polytechnic University of Puerto Rico, 1993-12)A digital program to compute the industrial air conditioned load was designed. It took us over 3,000 hours to obtain a reliable product which excels all air conditioned programming standards known to this moment. The program ... -
Diseño de experimentos con una máquina de revestimiento de tabletas en una industria farmacéutica
(Polytechnic University of Puerto Rico, 1994-06)A subtle but meaningful kind of loss is the acceptance of subjective beliefs within an organization. Profits are never a result of mysticism. Subjectivity without a precise base is a way of lying and, although it might not ... -
Diseño de experimentos para una de las líneas de llenado y empaque en una industria farmacéutica local
(Polytechnic University of Puerto Rico, 1994-06)A local pharmaceutical company has to reduce the number of complaints from customers who receive its products in broken or cracked glass bottles. In this paper we discuss an experiment to establish parameters to guarantee ... -
Diseño de Mezcla de Hormigón Utilizando Vidrio Reciclado de Botellas como Parte del Agregado Fino y Cemento Adicionado con Escoria de Alto Horno
(Polytechnic University of Puerto Rico, 2016)El presente estudio es la continuación de un proyecto donde se realizaron pruebas a hormigones con vidrio reciclado en sustitución de agregado fino en un 10%, 20% y 30%. En esta nueva etapa, el vidrio fue recolectado de ... -
Diseño de un controlador de lógica programable
(Polytechnic University of Puerto Rico, 1991-12)This document shows how to design a programmable logic controller. This type of design involves several steps, but these steps were grouped in two subsequent phases. The first phase deals with the design and implementation of ... -
Diseño de un experimento para una máquina de embotellado
(Polytechnic University of Puerto Rico, 1995-12)Experimental design for a bottling proccess machine In this article we present an experimental design for a bottling process machine of the dry products plant of a local pharmaceutical industry. Our goal is to identify ... -
Diseño de un flujo continuo utilizando la filosofía de "Justo a tiempo" (Just In Time)
(Polytechnic University of Puerto Rico, 1991-06)La filosofía de "Justo a tiempo" consiste en diseñar un sistema de manufactura flexible y que promueva mejoras continuas. Entre las ventajas que ofrece este concepto se destacan la eficiencia, la menor cantidad de material ... -
Diseño de un marcapaso programable con memoria y capacidad de comunicación
(Polytechnic University of Puerto Rico, 1992-12)A design of a programmable pacemaker unit which integrates microprocessor control, memories and a communication device. This pacemaker uses programming techniques to adjust its operations to the patients' needs, to compile ... -
Diseño de un microprocesador
(Polytechnic University of Puerto Rico, 1994-06)We show the design of a microprocessor that includes the set of instructions, the addressing modes and the cycle of fetch-decode-execute an instruction. We chose the registers used in the design from the board and then ... -
Diseño de un modelo de simulación por computadoras para una sala de emergencias
(Polytechnic University of Puerto Rico, 1991-12)This document describes the development of a simulation model and its use in the emergency room of a hospital. The first part of the document presents the problem and the system to be modeled, the objectives of the study, ...