Mostrar el registro sencillo del ítem

dc.rights.licenseAll rights reserveden_US
dc.contributor.advisorPons Fontana, Carlos A.
dc.contributor.authorOcasio Ortiz, Ángel
dc.date.accessioned2020-11-04T12:45:29Z
dc.date.available2020-11-04T12:45:29Z
dc.date.issued2009
dc.identifier.citationOcasio Ortiz, A. (2009). Cycle time reduction using lean manufacturing techniques for a solid pharmaceutical product [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico.en_US
dc.identifier.urihttp://hdl.handle.net/20.500.12475/932
dc.descriptionDesign Project Article for the Graduate Programs at Polytechnic University of Puerto Ricoen_US
dc.description.abstractAbstract ⎯ The purpose of this project was to demonstrate that the Lean Manufacturing techniques could be applied to a Solid Pharmaceutical Product in order to reduce the cycle time. During the year 2007, the Solid Pharmaceutical Product studied had 52 days of cycle time. The goal is to reduce the cycle time 25% or to 39 days. Lean Manufacturing tools used in this project was the process map to develop the required knowledge of the manufacturing process and the Value Stream Mapping where the values added and non-values added activities were identified. A Multidisciplinary team, essential for creation and implementation of new ideas, a list of improvements was generated and weighted for prioritization. This prioritization matrix is the foundation to start the implementation of improvements. After the Multidisciplinary team implemented the short term improvements in the Manufacturing Area, it was observed that the Product Cycle time decreased to 37 days in the third quarter of the 2008. After completion of the study, it was proved that the Lean Manufacturing techniques can be applied to a Solid Pharmaceutical Product and can radically reduce the cycle time. Key Terms ⎯ Kaizen, Value add (VA), Value Stream Map and Waste (muda).en_US
dc.language.isoenen_US
dc.publisherPolytechnic University of Puerto Ricoen_US
dc.relation.ispartofManufacturing Engineering;
dc.relation.ispartofseriesSpring-2009;
dc.relation.haspartSan Juanen_US
dc.subject.lcshSix sigma (Quality control standard)en_US
dc.subject.lcshLean manufacturingen_US
dc.subject.lcshPharmaceutical industry--Quality controlen_US
dc.subject.lcshPharmaceutical industry--Managementen_US
dc.subject.lcshProduction management--Quality controlen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Research
dc.titleCycle Time Reduction using Lean Manufacturing Techniques for a Solid Pharmaceutical Producten_US
dc.typeArticleen_US
dc.rights.holderPolytechnic University of Puerto Rico, Graduate Schoolen_US


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem