Browsing by Author "Nieves Castro, Rafael A."
Now showing items 1-20 of 237
-
Acceptance Testing for Thermoplastic Injection Molds
Arias Geraldo, Pavel (Universidad Politécnica de Puerto Rico, 2020)The injection molding process is the most important of all plastics processing processes due to its variety of uses and applications. The primary element of an injection molding process is the mold itself. Molds are expensive ... -
Alternate Raw Material Supplier Validation
Valerín Díaz, Melissa (Polytechnic University of Puerto Rico, 2019)This article discusses the Process Validation of Over the Counter Pharmaceutical Product using alternate supplier of raw material. The primary ibuprofen drug substance supplier for GSK Ibuprofen family products informed ... -
Analytical Method Technology Transfer From Quality Control Laboratory To Manufacture Area
Pérez Dominicci, Linnette (Polytechnic University of Puerto Rico, 2021)The project was developed with the intent to document the analytical transfer method to reduce in-process concentration testing cycle time. A reduction of up to 50% turnaround time (TAT) downtime was achieved. Waste reduction ... -
Aplicación de Lean Six Sigma a Compañía de Construcción, Mejorando la Imagen y la Estructura
Rosa Torres, Héctor D. (Polytechnic University of Puerto Rico, 2015)Hoy en día es bien importante mantener la rentabilidad del negocio a niveles competitivos. Si el equipo de trabajo no está motivado, el servicio que ofrecen nunca será completado a tiempo, trayendo consigo descontento de ... -
Aplicación de Metodología DMAIC-Seis Sigma para Mejorar el Proceso de Almacenaje de una Compañía Distribuidora de Accesorios de Equipos Electrónicos
Cartagena Rivera, Kevin A. (Polytechnic University of Puerto Rico, 2023)Este proyecto contiene la propuesta de trabajo para el mejoramiento del área de almacén de una empresa de distribución de accesorios para equipos electrónicos como celulares, tabletas, etc. y el estudio se centrará ... -
Applicability of Lean Concepts in Reducing Change Over Time to Increase Production Capacity
Sécola, Lydianne (Polytechnic University of Puerto Rico, 2011)Abstract - At this very competitive environment, companies need to do more with less. One way to do this is to maximize the use of the facilities that are already in use instead of building new ones or expanding existing ... -
Application of Design of Experiment to Demonstrate Equivalency of Two Multi Layer Compression Process for an Extended Release Tablets Product
Carrión Vega, Jaime (Polytechnic University of Puerto Rico, 2009)Abstract ― A design of experiment (DOE) was performed to a multi layer compression process that is going to be transferred from facility A to facility B. This study demonstrates and compared the equivalence of the compression ... -
The Application of Lean Tools Using the Plan-Do-Check-Act Cycle
Rodriguez Muñoz, Felix R. (Polytechnic University of Puerto Rico, 2011)Abstract - This kaizen event is going to illustrated how to apply Lean principles and tool using the PLAN-DO-CHECK-ACT methodology. Throughout the project it will be demonstrated how important the Lean principles are for ... -
An Application of Project Management Methodology for the Development of an Advance Identity Product within Budget and On Time Delivery
Rodríguez Colón, Edwin O. (Polytechnic University of Puerto Rico, 2012)Abstract - In an Advanced Identity Management Technology Company the purpose is to create solutions to identifying individuals in a system (such as a country, a network, or an enterprise) and controlling their access to ... -
Applying International Organization Standardization Guideline for Quality System Management (ISO 9001:2008) in the Aerospace Industry
Ortiz, Eric X. (Polytechnic University of Puerto Rico, 2012)Abstract - The aerospace industry is based on the continuous improvement on processes and product within a high quality. Many companies are working with outsourcing companies to design most of the components that will be ... -
Assay Report Documentation and Storage Process Improvement Using DMADV Methodology
Cartagena Méndez, Manuel J. (Polytechnic University of Puerto Rico, 2021)As part of the Process Engineering team, one of our goals is to identify areas with opportunities in our current manufacturing processes. It was identified an opportunity to improve the assay hard copy documentation generated ... -
Assembly fit-up issue: investigation of a first stage high pressure gas turbine rotor
Miranda Rivera, Antonio (Polytechnic University of Puerto Rico, 2018)A Gas Turbine engine generates mechanical energy from a combustible fuel. This mechanical energy could be converted into electrical power by means of a rotating shaft as opposed to the pressurized thrust generated on ... -
Audit Process Optimization in the Manufacturing Area
Ortiz Martinez, Alexander (Polytechnic University of Puerto Rico, 2021)This project was developed to demonstrate a viable audit process optimization in the manufacturing area. The AbbVie site ubicated in Barceloneta, Puerto Rico,started with only one product back in ... -
Automation of Variables Recording Process to Reduce Rework and Decrease Scripting Time
Arroyo Rivera, Jonataniel (Polytechnic University of Puerto Rico, 2018)The companies of aerospace services need to maintain the highest quality of their product. Therefore, this project will focus in the improvement of a process when verifying and validating system level requirements. For ... -
Automatización de una Manejadora de Aire con Purificador Integrado
Sánchez Hernández, Kevin A. (Polytechnic University of Puerto Rico, 2021)Un centro comercial tomóla decisión de automatizar su sistema de unidades de aire acondicionado. Esto se realizócon el fin de generar un ahorro energético en un periodo corto de tiempo. El númerode ... -
Automatización Y Optimización Del Garaje Rivera
Torres Soto, Dorian E. (Polytechnic University of Puerto Rico, 2020)Este trabajo consiste en el desarrollo de un mecanismo que pueda ser utilizado con fines de documentación. Se efectuará en un taller de mecánica en el cual se busca automatizar y optimizar diferentes partes del proceso. ... -
Automatization of the Patch and Serter Installation System’s Sensor Transference Step
Rios Santiago, Rafael (Polytechnic University of Puerto Rico, 2022)The Patch and Serter Installation System is one of the multiple computerized systems that composes the Cell Operating System (COS) assembly lineat Medtronic Juncos Campus as part of the Project Synergy. This equipment ... -
Autonomous Driving Supercomputer Assembly Air Cooling of Rear On-Board Cooling System Heat Exchanger
Hernández Mojica, Erick (Polytechnic University of Puerto Rico, 2023)The Autonomous Driving Supercomputer Assembly for autonomous vehicles is likely to fail if it is not adequately cooled during test. The project research is divided into three phases: demonstrating through mathematical ... -
Battery Assembly Re-design in a Medical Device Company
Ortiz Garcia, Aisha Y. (Polytechnic University of Puerto Rico, 2012)Abstract - Today, customer complaints is a strategic business metric for the organizations to measure the customer satisfaction and product’s performance. During YR2011, an adverse trend on complaints per million (CPMs) ... -
Building your Businesses Performance using Quality Key Points
Ramírez Colom, Jose Guillermo (Polytechnic University of Puerto Rico, 2016)The problem with todays and yesterday’s businesses is the lack of innovative ideas because everything was build and presented at the same time and not in stages. Today all you see is what is left of what was once ...