Buscar
Mostrando ítems 1-10 de 122
High Volume Manufacturing Process Transfer
(Polytechnic University of Puerto Rico, 2008)
Transferring a high volume
manufacturing product line requires a detail level
of information and analysis which could result in
either success or failure. Knowledge of the process
and product is critical when new ...
Statistical Analysis for the Development of a Mathematical Model for Liquid Phase Color Reproduction
(Polytechnic University of Puerto Rico, 2009)
Abstract - This study aims to develop a mathematical model, capable to give a receipt of the dies concentrations to be used to develop a desire color. The model helps to minimize, and in some cases eliminate, the trial and ...
Development of General Guidelines for the Pharmaceutical Manufacture Company Reaction to a Consent Decree Emitted by the Federal Drug Administration (FDA)
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ Consent Decrees have been very popular lately. The consent decree mandates that a company start initiating change, and that change is usually associated with the way the company is manufacturing a product; and, ...
Are cleaning faults, really, quality or administrative issues?: Cleaning Validation Program optimization for a Pharmaceutical plant
(Polytechnic University of Puerto Rico, 2008)
The cleaning procedure process validation has generated considerable discussion when executing a US Food and Drug Administration (FDA) inspection at Pharmaceutical Plants. In general, the FDA requires the equipment to be ...
Improvement of Contact Lens Field Complaint Rate Using the DMAIC Approach
(Polytechnic University of Puerto Rico, 2009)
Contact lenses are susceptible to a
defect call “tearing”. This is common but seldom
condition detected in the field by the customer. The
manufacturing process of a contact lens is a very
precise method of combining ...
Production Optimization in the Packaging and Inspection Process at a Thermoforming Area
(Polytechnic University of Puerto Rico, 2008)
This research is conducted in a
manufacturing packaging company that makes the
packages (plastic trays) for medical device
companies. It is intended to increase the packaging
and inspection production line by considering ...
Piedras Blancas Landslide: Mitigation Works
(Polytechnic University of Puerto Rico, 2009)
Abstract - The Puerto Rico Highway and Transportation Authority has conducted since the 1980s several geotechnical investigations about the Piedras Blancas Landslide in the Municipality of San Sebastian. This landslide has ...
Development of Vaporized Hydrogen Peroxide (VHP) Decontamination Cycle for a Syringe Isolator
(Polytechnic University of Puerto Rico, 2009)
Abstract - A parenteral syring filling line inside a closed cabin isolator was installed in an existing manufacturing space. To increase sterility assurance the isolator must be effectively biodecontamined by means of Vapor ...
Application of Design of Experiment to Demonstrate Equivalency of Two Multi Layer Compression Process for an Extended Release Tablets Product
(Polytechnic University of Puerto Rico, 2009)
Abstract ― A design of experiment (DOE) was performed to a multi layer compression process that is going to be transferred from facility A to facility B. This study demonstrates and compared the equivalence of the compression ...
Quality Improvement in a Medical Device Manufacturing Process Applying Six Sigma Tools
(Polytechnic University of Puerto Rico, 2009)
Abstract - The current manufacturing process of a medical device product has great opportunities on scrap percent reduction, which has been impacting the material and labor costs of the product, as well as in defects per ...