Listar Manufacturing Engineering por título
Mostrando ítems 61-80 de 344
-
Design for Six Sigma Using DMADV for Implementing Sewing Machine
(Polytechnic University of Puerto Rico, 2019)This project focus on process design whose aim is to find credible bounding parameters for an industrial sewing machine with the intention to minimize production cost, speed up the process and assure an output of ... -
Design Methodology of Clean Room Overtime Reduction in a Medical Device Plant
(Polytechnic University of Puerto Rico, 2015)According to the last year data in a medical device company, the packaging shipped units are increasing by the last eight months. The packaging clean room headcount are generate too much overtime affecting the finance ... -
Design Methodology of Production Improvement at “X Hydroponic Farm”
(Polytechnic University of Puerto Rico, 2016)According to “X Hydroponic Farm” facilities, a 40 x 60 square feet farm, with a capacity of producing 750 plants weekly; and actual production rate of 250 plants a week, is expecting a demand increase of approximately 60%. ... -
Design of a Brewery Manufacturing Process for a Small Starting Scale
(Polytechnic University of Puerto Rico, 2014)In this paper will be about the process and requirement to create a facility for brewery in order to implement Pilot Plant services. This project has a scope of preparing a Pilot plant focused in the opportunity of ... -
Design of a Cleaning Change Over Reduction Strategy for a High Volume Product in a Packaging Line
(Polytechnic University of Puerto Rico, 2010)Currently packaging operations are trying to reduce the downtime and operational cost among others activities to enhance efficiency and overall process performance. Based on this objective, pharmaceutical packaging ... -
Design of a Quality Management in Operations of Metrotrans, Inc. using DMADV Methodology
(Polytechnic University of Puerto Rico, 2016)This research will be focusing on the design of a quality system in operations of transportation for the company Metrotrans, Inc. The design shall establish the timing of the operations related to the services offered ... -
Design of a Structured Network Cabling Applying International Standards
(Polytechnic University of Puerto Rico, 2014)This article is designed to present and illustrate the need for the requirement of the technical specifications around the development of applicable international standards for structured cabling. One of the main ... -
Design Project for Process Improvement of the Manufacturing of Electrode Ring –Monolithic Controlled Released Devices (MCRDs)
(Polytechnic University of Puerto Rico, 2021)Medtronic Rice Creek Pharmaceutical Operations at Fridley, Minnesota currently build the Electrode Ring, Monolithic Controlled Released Device (MCRD) assembly which is sent to Medtronic Villalba ... -
Determination of In-Processing Manufacturing Impact into Elution Rate of Drug Eluting Steroid Collars
(Polytechnic University of Puerto Rico, 2012)Abstract - The Food and Drug Administration provides regulations for combination products. The medical device industry needs to comply with these regulations specifically in products containing drug. One of the many ... -
Determination of Punches’ Lubrication Parameters for a Tablet Press Machine Using Single Tip Tooling Configuration to Compress an Analgesic Consumer Healthcare Product
(Polytechnic University of Puerto Rico, 2012)The main goal of this engineering study is to determine a proper set of values for the lubrication interval parameters used for the punches of a tablet press machine. The values obtained will be referred as the starting ... -
Development and Evaluation of Prototype Heat Shrink Masking Machine
(Polytechnic University of Puerto Rico, 2016)This design project consists in developing a prototype equipment to reduce the heat variability produced by the current heat shrink installation process. A heat Shrink tubing is a shrinkable plastic tubing commonly ... -
Development and Optimization for Generic Capsule Solid Oral Dosage Formulation Using Quality by Design (QbD) Principles
(Polytechnic University of Puerto Rico, 2015)Traditionally, the development and formulation of generic drugs has focused on the delivery of the product to the next phase of clinical study making the formulation design iterative and empirical. Furthermore, ... -
Development of a Generic Pharmaceutical Solid Dosage Form Using Quality by Design (QbD)
(Polytechnic University of Puerto Rico, 2014)The Pharmaceutical Generic Sector has been growing over the past years and it is expected to surpass brand drugs in sale over next years. The FDA now recommends Quality by Design to develop Generic Drugs. The present work ... -
Development of a New Medical Device Production Line Using Systems Engineering
(Polytechnic University of Puerto Rico, 2012)Abstract - The design and development of a production line to manufacture a new medical device for clinical trials requires the establishment of a very precise implementation plan. This is especially important since we are ... -
Development of an Automated System for the Monitoring and Control pH and Conductivity of a Dampening Solution
(Polytechnic University of Puerto Rico, 2012)The influence of dampening solution parameters on the final printing quality has been remarked on many researches during the last decades. There are many parameters that need to be controlled on a fountain solution as pH, ... -
Development of Bulk Shipping Studies in Pharmaceutical Industry
(Polytechnic University of Puerto Rico, 2012)Abstract ⎯ A bulk shipping study in the pharmaceutical industry consists in monitoring and analyzing the environmental conditions (e.g. temperature and relative humidity) during shipping and transportation of the drug ... -
Development of Dual Drugs with Coated Microneedles
(Polytechnic University of Puerto Rico, 2022)Coated microneedles have been shown to deliver biopharmaceuticals and drugs into the skin in a minimally invasive manner. To increase patient acceptance, smaller needle diameters and lower insertion ... -
Development of Effectiveness Program through the Use of Productivity Metrics
(Polytechnic University of Puerto Rico, 2014)The Overall Plant Effectiveness Program has the purpose to improve the production capacity and optimize operations performance in an Active Pharmaceutical Ingredient (API) manufacturing plant. It requires a complete analysis ... -
Diseño de Optimización en el Proceso de Diseño en el Área de Moldeo por Inyección
(Polytechnic University of Puerto Rico, 2017)Mediante el uso de la metodología de Lean se reduce el tiempo de diseño y al mismo tiempo se eleva la calidad de producto que se hace en los moldes de inyección. Este método se aplicará haciendo una implementación de ... -
Diseño de Optimización en Logística de Organización
(Polytechnic University of Puerto Rico, 2018)El presente trabajo se desarrolló con la finalidad de implementar la metodología DMAIC Seis Sigma en conjunto a la de 5s, organizando y limpiando para reducir el tiempo que toma la búsqueda de materiales y herramientas ...