Listar Design Project Articles Master Degree por fecha de publicación
Mostrando ítems 1-20 de 1532
-
High Volume Manufacturing Process Transfer
(Polytechnic University of Puerto Rico, 2008)Transferring a high volume manufacturing product line requires a detail level of information and analysis which could result in either success or failure. Knowledge of the process and product is critical when new ... -
Are cleaning faults, really, quality or administrative issues?: Cleaning Validation Program optimization for a Pharmaceutical plant
(Polytechnic University of Puerto Rico, 2008)The cleaning procedure process validation has generated considerable discussion when executing a US Food and Drug Administration (FDA) inspection at Pharmaceutical Plants. In general, the FDA requires the equipment to be ... -
Production Optimization in the Packaging and Inspection Process at a Thermoforming Area
(Polytechnic University of Puerto Rico, 2008)This research is conducted in a manufacturing packaging company that makes the packages (plastic trays) for medical device companies. It is intended to increase the packaging and inspection production line by considering ... -
Statistical Analysis for the Development of a Mathematical Model for Liquid Phase Color Reproduction
(Polytechnic University of Puerto Rico, 2009)Abstract - This study aims to develop a mathematical model, capable to give a receipt of the dies concentrations to be used to develop a desire color. The model helps to minimize, and in some cases eliminate, the trial and ... -
Development of General Guidelines for the Pharmaceutical Manufacture Company Reaction to a Consent Decree Emitted by the Federal Drug Administration (FDA)
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ Consent Decrees have been very popular lately. The consent decree mandates that a company start initiating change, and that change is usually associated with the way the company is manufacturing a product; and, ... -
Improvement of Contact Lens Field Complaint Rate Using the DMAIC Approach
(Polytechnic University of Puerto Rico, 2009)Contact lenses are susceptible to a defect call “tearing”. This is common but seldom condition detected in the field by the customer. The manufacturing process of a contact lens is a very precise method of combining ... -
Piedras Blancas Landslide: Mitigation Works
(Polytechnic University of Puerto Rico, 2009)Abstract - The Puerto Rico Highway and Transportation Authority has conducted since the 1980s several geotechnical investigations about the Piedras Blancas Landslide in the Municipality of San Sebastian. This landslide has ... -
Development of Vaporized Hydrogen Peroxide (VHP) Decontamination Cycle for a Syringe Isolator
(Polytechnic University of Puerto Rico, 2009)Abstract - A parenteral syring filling line inside a closed cabin isolator was installed in an existing manufacturing space. To increase sterility assurance the isolator must be effectively biodecontamined by means of Vapor ... -
Application of Design of Experiment to Demonstrate Equivalency of Two Multi Layer Compression Process for an Extended Release Tablets Product
(Polytechnic University of Puerto Rico, 2009)Abstract ― A design of experiment (DOE) was performed to a multi layer compression process that is going to be transferred from facility A to facility B. This study demonstrates and compared the equivalence of the compression ... -
Quality Improvement in a Medical Device Manufacturing Process Applying Six Sigma Tools
(Polytechnic University of Puerto Rico, 2009)Abstract - The current manufacturing process of a medical device product has great opportunities on scrap percent reduction, which has been impacting the material and labor costs of the product, as well as in defects per ... -
Estudio de los Aspectos Ergonómicos en Laboratorios de Control de Calidad en Industrias Farmacéuticas
(Polytechnic University of Puerto Rico, 2009)Abstracto - El objetivo de esta investigación es conocer, cuan efectivo son los diseños ergonómicos en laboratorios de control de calidad de las industrias farmacéuticas. En esta investigación se realizó una evaluación de ... -
Lean and Safe Manufacturing for an Antidepressant Tablets Coating Process
(Polytechnic University of Puerto Rico, 2009)Abstract - The Lean and Safe Manufacturing Process (6S event) was selected for implementation in an antidepressant tablets coating manufacturing process. The coating process was identified due to the utilization of toxic ... -
Anticipando la Crisis
(Polytechnic University of Puerto Rico, 2009)Abstracto - Este proyecto tiene como meta orientar sobre los objetivos necesarios que una empresa debe establecer, para implementar un plan de contingencia para evitar interrupciones parciales o prolongadas de sus actividades ... -
Comparación de Eficiencia en Cuanto a Comportamiento y Costo Entre el Diseño ASD y LRFD para el Edificio UNILOPEZ
(Polytechnic University of Puerto Rico, 2009)Abstracto - Este documento consistió en el análisis estructural del edificio de oficinas UNILOPEZ (estructura de acero), mediante el uso de un programa de computadoras llamado ETABS, el cual se especializa en el análisis ... -
Cycle Time Reduction using Lean Manufacturing Techniques for a Solid Pharmaceutical Product
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ The purpose of this project was to demonstrate that the Lean Manufacturing techniques could be applied to a Solid Pharmaceutical Product in order to reduce the cycle time. During the year 2007, the Solid ... -
Application of DMAIC Methodology to Improve the Utilization of an Industrial Glassware Washer System in a Biopharmaceutical Industry
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ This article describe how the problem solving approach of Define, Measure, Analyze, Implement and Control (DMAIC) is applied to increase the utilization of an industrial glassware washer system in a Biopharmaceutical ... -
R: Color Package
(Polytechnic University of Puerto Rico, 2009)Abstract - R is a software language mostly used of statistical and mathematical purporses. R capabilities are extended by user’s submitted packages. The gColor Package provides R Language a method to solve Systems of ... -
Optimization of On-Line Automated Dissolution System for Solid Dose Control Release Tablets
(Polytechnic University of Puerto Rico, 2009)Abstract ⎯ An optimization of an automated dissolution system for control release tablets has been accomplished by the implementation of several variables using Six Sigma tools. Variables under evaluation includes: filter ... -
Tratamiento de Aguas Residual Domestica para el Complejo de Apartamentos “El Metro”, Villa Mella, Santo Domingo
(Polytechnic University of Puerto Rico, 2009)Resumen - El diseño de la planta de tratamiento de las aguas residuales domesticas para el complejo de apartamentos “El Metro”, surge de la necesidad del Ing. Juan Padilla de construir dicha planta para 416 viviendas, ya ... -
Structured Approach for Compliance Determination of FDA Regulated Tablet Compression Process
(Polytechnic University of Puerto Rico, 2010)Tablets are the most popular unit dosage form used by the Pharmaceutical Industry to provide health treatment to patients in the United States. It is important to control process critical parameters (variables) such ...