Suche
Anzeige der Dokumente 1-10 von 19
Comparación de Eficiencia en Cuanto a Comportamiento y Costo Entre el Diseño ASD y LRFD para el Edificio UNILOPEZ
(Polytechnic University of Puerto Rico, 2009)
Abstracto - Este documento consistió en el análisis estructural del edificio de oficinas UNILOPEZ (estructura de acero), mediante el uso de un programa de computadoras llamado ETABS, el cual se especializa en el análisis ...
Anticipando la Crisis
(Polytechnic University of Puerto Rico, 2009)
Abstracto - Este proyecto tiene como meta orientar sobre los objetivos necesarios que una empresa debe establecer, para implementar un plan de contingencia para evitar interrupciones parciales o prolongadas de sus actividades ...
Development of Vaporized Hydrogen Peroxide (VHP) Decontamination Cycle for a Syringe Isolator
(Polytechnic University of Puerto Rico, 2009)
Abstract - A parenteral syring filling line inside a closed cabin isolator was installed in an existing manufacturing space. To increase sterility assurance the isolator must be effectively biodecontamined by means of Vapor ...
Development of General Guidelines for the Pharmaceutical Manufacture Company Reaction to a Consent Decree Emitted by the Federal Drug Administration (FDA)
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ Consent Decrees have been very popular lately. The consent decree mandates that a company start initiating change, and that change is usually associated with the way the company is manufacturing a product; and, ...
Tratamiento de Aguas Residual Domestica para el Complejo de Apartamentos “El Metro”, Villa Mella, Santo Domingo
(Polytechnic University of Puerto Rico, 2009)
Resumen - El diseño de la planta de tratamiento de las aguas residuales domesticas para el complejo de apartamentos “El Metro”, surge de la necesidad del Ing. Juan Padilla de construir dicha planta para 416 viviendas, ya ...
Application of Design of Experiment to Demonstrate Equivalency of Two Multi Layer Compression Process for an Extended Release Tablets Product
(Polytechnic University of Puerto Rico, 2009)
Abstract ― A design of experiment (DOE) was performed to a multi layer compression process that is going to be transferred from facility A to facility B. This study demonstrates and compared the equivalence of the compression ...
Are cleaning faults, really, quality or administrative issues?: Cleaning Validation Program optimization for a Pharmaceutical plant
(Polytechnic University of Puerto Rico, 2008)
The cleaning procedure process validation has generated considerable discussion when executing a US Food and Drug Administration (FDA) inspection at Pharmaceutical Plants. In general, the FDA requires the equipment to be ...
Improvement of Contact Lens Field Complaint Rate Using the DMAIC Approach
(Polytechnic University of Puerto Rico, 2009)
Contact lenses are susceptible to a
defect call “tearing”. This is common but seldom
condition detected in the field by the customer. The
manufacturing process of a contact lens is a very
precise method of combining ...
Production Optimization in the Packaging and Inspection Process at a Thermoforming Area
(Polytechnic University of Puerto Rico, 2008)
This research is conducted in a
manufacturing packaging company that makes the
packages (plastic trays) for medical device
companies. It is intended to increase the packaging
and inspection production line by considering ...
Piedras Blancas Landslide: Mitigation Works
(Polytechnic University of Puerto Rico, 2009)
Abstract - The Puerto Rico Highway and Transportation Authority has conducted since the 1980s several geotechnical investigations about the Piedras Blancas Landslide in the Municipality of San Sebastian. This landslide has ...