| dc.rights.license | All rights reserved | en_US |
| dc.contributor.advisor | Cruzado Vélez, Héctor J. | |
| dc.contributor.author | Collazo Acevedo, Glorimaris | |
| dc.date.accessioned | 2024-02-12T19:59:43Z | |
| dc.date.available | 2024-02-12T19:59:43Z | |
| dc.date.issued | 2023 | |
| dc.identifier.citation | Collazo Acevedo, G. (2023). Optimization and Automation of Visual Inspection of an Injection Molded Part in Jabil Healthcare [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico. | en_US |
| dc.identifier.uri | http://hdl.handle.net/20.500.12475/2127 | |
| dc.description | Design Project Article for the Graduate Programs at Polytechnic University of Puerto Rico | en_US |
| dc.description.abstract | In Jabil Healthcare an injection molded part requires a 100% inspection at 10X of magnification to comply with the visual criteria of no embedded particles and contamination. Jabil’s current process uses two operators to comply with the requirement. This process is impacting Jabil since it has high operational costs and is entirely dependent on people. Two options were technically
and financially compared to verify effectiveness and compliance in the product quality. The approved option guarantees a reduction of cost per unit from $0.1198 to $0.1103 after covering the amortization cost after three years. The selection
option provides a reduction of cost of $38,000 per year in savings which is equivalent of 8% of savings per year after covering the amortization costs. Key Terms ⎯ Cost Reduction, Plastic Components, Product Quality, Visual Inspection. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Polytechnic University of Puerto Rico | en_US |
| dc.relation.ispartof | Management; | |
| dc.relation.ispartofseries | Spring-2023; | |
| dc.relation.haspart | San Juan | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Research | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Subject headings--Unassigned | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Posters | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate School--Master in Engineering Management degree | en_US |
| dc.title | Optimization and Automation of Visual Inspection of an Injection Molded Part in Jabil Healthcare | en_US |
| dc.type | Article | en_US |
| dc.rights.holder | Polytechnic University of Puerto Rico, Graduate School | en_US |
