dc.rights.license | All rights reserved | en_US |
dc.contributor.advisor | Cecchini, Andrés | |
dc.contributor.author | Rivera Santos, Luis J. | |
dc.date.accessioned | 2020-07-09T15:35:33Z | |
dc.date.available | 2020-07-09T15:35:33Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | Rivera Santos, L. J. (2018). Finite element analysis of sandwich T-Joints subjected to water slamming loads [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico. | en_US |
dc.identifier.uri | http://hdl.handle.net/20.500.12475/334 | |
dc.description | Design Project Article for the Graduate Programs at Polytechnic University of Puerto Rico | en_US |
dc.description.abstract | This article evaluates the structural
response of a sandwich ship hull with T-joint
longitudinal stiffeners subjected to water slamming.
Finite element analysis was conducted using the
commercial code LS-DYNA. The T-joint stiffeners
were modeled as linear elastic springs allowing the
vertical displacement and rotation at the panel
ends. Three different stiffnesses and two impact
velocities were considered. Results showed to be
significantly different from the fixed-supported
panel case.
Keywords - Finite Element Analysis, FluidSandwich Composite Hulls, Structure Interaction,
T-Joint, Water Slamming. | en_US |
dc.language.iso | en_US | en_US |
dc.publisher | Polytechnic University of Puerto Rico | en_US |
dc.relation.ispartof | Mechanical Engineering; | |
dc.relation.ispartofseries | Spring-2018; | |
dc.relation.haspart | San Juan | en_US |
dc.subject.lcsh | Finite element method | |
dc.subject.lcsh | Joints (Engineering) | |
dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Research | |
dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Posters | |
dc.title | Finite Element Analysis of Sandwich T-Joints Subjected to Water Slamming Loads | en_US |
dc.type | Article | en_US |
dc.rights.holder | Polytechnic University of Puerto Rico, Graduate School | en_US |