Suche
Anzeige der Dokumente 21-30 von 270
Use of Experimental Design for the Characterization of a Depyrogenation Machine
(Polytechnic University of Puerto Rico, 2010)
Depyrogenation tunnel are used in
pharmaceutical filling lines to sterilize glass
containers before they are aseptically filled. These
tunnels use unidirectional hot air at temperatures
up to 350°C and can be used to ...
Process Optimization by Implementing Lean Six Sigma in an Optical Manufacturing Laboratory
(Polytechnic University of Puerto Rico, 2010)
The Design Project intends to be
implemented in an Optical Manufacturing
Laboratory. This laboratory is located at Mayagüez
with the purpose of distributing ophthalmic lenses
to different optical centers around the ...
Granulation Area Capacity Increase
(Polytechnic University of Puerto Rico, 2020)
Manufacturing pharmaceuticals are
continuously looking for waste reduction to
improve their processes and increase the
manufacturing output. Granulation area capacity
increase was evaluated for a solid dosage
pharmaceutical ...
Sistema de Monitoreo para Compuestos Farmacéuticos en el Agua Residual de Puerto Rico
(Polytechnic University of Puerto Rico, 2020)
Un amplio conjunto de diferentes
contaminantes orgánicos de aguas residuales,
incluidos muchos compuestos de preocupación
ambiental emergen en las corrientes de Puerto Rico.
Los compuestos escogidos se seleccionarán ...
Reducing Cost by Reducing Frequency of Submitting to Identify Microorganisms Isolated from Non-critical Areas in a Parenteral Manufacture
(Polytechnic University of Puerto Rico, 2020)
A microbiology laboratory identifies
all the microorganisms isolated from non-critical
rooms with a frequency of every three months, in
order to establish a microbial profile of the
microorganisms present in the ...
Process Optimization by the Application of Lean Manufacturing Principles
(Polytechnic University of Puerto Rico, 2020)
Commercial demand at a
pharmaceutical facility in Juncos has been
constantly increasing since 2016. Focused on
process improvement strategies, our formulation
capabilities were increased to support Drug Product
requirements. ...
Development and Design of Quality Standards for Secure Proper Documentation in Hire Packs for Staffing Specialists
(Polytechnic University of Puerto Rico, 2020)
This article discusses the development
and design of quality standards in order to secure
proper documentation in hire packs in a staffing
agency. By constantly updating new forms and
tracking new labor laws, this ...
5s Techniques to Optimize Classroom Organization
(Polytechnic University of Puerto Rico, 2020)
This research project was focused in the 5s
methodology for the improvement of an elementary
classroom. The 5s is defined as a method of five steps that
seeks to improve working space, eliminate waste and
improve ...
Estructura para Reconciliación de Lotes en Área de Encapsulación Utilizando la Metodología Esbelta (“Lean”)
(Polytechnic University of Puerto Rico, 2021)
La industria farmacéutica ha enfrentado muchos cambios con el paso del tiempo. La necesidad de adaptarse a estos cambios ha provocado que las farmacéuticas hayan tenido que adoptar diferentes metodologías para mantener la ...
Catheter bonding Process Improvements with High-intensity Ultraviolet Curing Systems
(Polytechnic University of Puerto Rico, 2021)
Ultraviolet (UV) curing is a common process used in medical devices manufacturing for bonding operations. Light-curable adhesives provide rapid cure, great adhesion, and good chemical resistance for sterilization processes. ...