Auflistung Polytechnic University of Puerto Rico nach Titel
Anzeige der Dokumente 791-810 von 2055
-
Finished Goods Failure Reduction in a Wound Closure Medical Device Product Family
(Polytechnic University of Puerto Rico, 2013)A corrective action and preventive action plan was developed to address the increase of Finished Goods failures in a wound closure medical device product family. Following a DefineMeasure-Analyze-Improve-Control Six ... -
Finite Element Analysis of Sandwich T-Joints Subjected to Water Slamming Loads
(Polytechnic University of Puerto Rico, 2018)This article evaluates the structural response of a sandwich ship hull with T-joint longitudinal stiffeners subjected to water slamming. Finite element analysis was conducted using the commercial code LS-DYNA. The ... -
Finite Element Modeling of Water Slamming on Sandwich Hull Structures
(Polytechnic University of Puerto Rico, 2017)This article evaluates the structural response of ship hull sandwich panels subjected to water slamming. Structural responses were obtained from several finite element (FE) model simulations developed by using the ... -
Firma Electrónica para Pacientes y Familiares
(Polytechnic University of Puerto Rico, 2022)Este proyecto está enfocado en el área hospitalaria del área oeste de Puerto Rico. El propósito fue eliminar los documentos que conlleven firma de pacientes o familiares con el fin de integrarlo al récord electrónico y ... -
First Pass Yield Improvement on Audit Results
(Polytechnic University of Puerto Rico, 2016)This research project was focused in the First Pass Yield improvement for Quality Audit results in Aerospace Company. The first pass yield is defined as the number of units coming out of a process divided by the number ... -
First Pass Yield Improvement on Casting Cell Using DMAIC Methodology
(Polytechnic University of Puerto Rico, 2013)This research project was focused in the First Pass Yield improvement in a cell of a Medical Device Company. The first pass yield is defined as the number of units coming out of a process divided by the number of units ... -
First Pass Yield Improvement on Casting Cell Using DMAIC Methodology
(Polytechnic University of Puerto Rico, 2019)This research project was focused in the First Pass Yield improvement in a cell of a Medical Device Company. In order to improve the first pass yield, the DMAIC methodology was used. This research contributed to improve ... -
First Pass Yield Metric Implementation for Validation Documents
(Polytechnic University of Puerto Rico, 2015)A regulatory compliance contractor in the life sciences industry desires to be distinguished from its competitors in terms of the quality of their services. To make it possible, the company intends to improve the ... -
Florida Hospital Centra Care Provider Performance Data Mart
(Polytechnic University of Puerto Rico, 2015)Querying a transactional database for aggregates reports can result in poorly responding queries and reports. Developing a data mart is a highly effective solution to overcome these limitations. This paper demonstrates ... -
Flow-Days Reduction Using Six Sigma Toolbox at Air Force Base Engine Maintenance Center
(Polytechnic University of Puerto Rico, 2012)Abstract - When the United States entered World War I in 1917, the U.S. government searched for a company to develop the first airplane engine "booster" for the fledgling U.S. aviation industry General Electric accepted ... -
Food Trucks Puerto Rico App
(Polytechnic University of Puerto Rico, 2018)In Puerto Rico there are many food trucks with food and dishes that are not seen in any restaurant and not many people know them. Over the years, more food trucks have been added to Puerto Rican food with creative dishes ... -
Forecasting Drought in Puerto Rico with the Standard Precipitation Index
(Polytechnic University of Puerto Rico, 2016)The main premise of the current effort is that the use of a drought index, such as Standard Precipitation Index (SPI), may lead to a more appropriate understanding of drought duration, magnitude and spatial extent in ... -
A Forensic Memory Image Acquisition Protocol Based on Windows Memory Analysis
(Polytechnic University of Puerto Rico, 2012)Computer Forensics has become an extremely important evidence gathering and analysis field in the modern electronic driven world. Most of the evidence acquired, preserved, processed and analyzed originates from long term ... -
Formulación de un modelo lagrangiano de partículas para simular la difusión de contaminantes atmosféricos. I
(Polytechnic University of Puerto Rico, 1998-06)One of the most relevant aspects the atmosphere is its capacity for transporting substances, heat or momentum vertically among different levels. This property is of fundamental importance in the troposphere because otherwise ... -
Formulation Process Optimization
(Polytechnic University of Puerto Rico, 2023)The field of biologics drugs development continues to grow and is becoming increasingly competitive. The manufacturing of biological medicines is a complex process that consumes a large amount of resources and time ... -
Fotogrametría de Bajo Vuelo por medio de Sistemas Aéreo no Tripulado para Modelación 3D en Área de Riesgo Geológico, Urb. Villa España, Bayamón, PR
(Polytechnic University of Puerto Rico, 2015)La importancia de la tecnología de los Sistemas Aéreos no Tripulados (UAV en ingles) no únicamente es en el campo de la fotogrametría sino en muchos otros usos. La aplicación de este sistema de vuelo para la generación ... -
Free Convection Fresnel Lenses Concentrator
(Polytechnic University of Puerto Rico, 2013)This project involves an evaluation of an improved Fresnel lenses solar energy concentrator. Its innovation consists of preventing forced convection heat losses at the receiver area. Heat losses by convection and by ... -
Freight Cost Reduction Project
(Polytechnic University of Puerto Rico, 2022)Shipping products from the Caribbean have a limited amount of freight options in comparison with other geographical regions. For HPE Puerto Rico, one of the main business goals for FY23 is to establish initiatives that ... -
From Bio Waste to Bone Substitute: 3D Printing Assisted Fabrication of Scaffolds Containing High Concentrations of Eggshell Derived Hydroxyapatite
(Polytechnic University of Puerto Rico, 2022-10-13)Autografts are the gold standard for bone repair interventions due to their osteoinductive and osteoconductive properties Unfortunately, this technique entails important drawbacks such as limited availability and donor ... -
From Brown Tides to 3D Printers: Additive Manufacturing of Novel Algae-Based Polymer Composites
(Polytechnic University of Puerto Rico, 2022-10-13)As a direct effect of ocean warming and nutrient enrichment, tones of a brown macroalgae known as Sargassum, have been accumulating on shores throughout the Caribbean region since 2011. These unprecedented annual events ...