Search
Now showing items 781-790 of 1206
Vertical Packaging Accumulator
(Polytechnic University of Puerto Rico, 2018)
The beverage manufacturing process is
based on filling a product with a defined structure
or flexible structure. If that product is pasteurized,
there are different considerations that must be met,
such as the filling ...
Changeover Reduction Time by Adjusting the Cleaning Critical Parameters in Automated CIP Systems
(Polytechnic University of Puerto Rico, 2018)
Clean-In-Place (CIP) is a widely use
process to clean biotechnology vessels contact
surfaces. CIP is an automated cleaning method that
involve minimum to no equipment disassembling
thereby reducing labor and time ...
Quality Control Laboratory Improvements
(Polytechnic University of Puerto Rico, 2018)
Sanper Pharmaceutical is an inhalation
anesthesia manufacturing plant. Its main products
are Elim and Marile. The high demand for its
products has created the need to make
improvements in their processes. As part of ...
Guide for The Optimization of Potable Water Distribution in Puerto Rico
(Polytechnic University of Puerto Rico, 2018)
The system of distribution of drinking
water is one of the most important infrastructures
of any population in the world. Water is necessary
to cover the basic needs of human beings, and also
to maintain a healthy flora ...
Application of Lean Manufacturing and Lean Six Sigma Tools to Improve Back to Back Activities in the Compression Process
(Polytechnic University of Puerto Rico, 2019)
A recent opportunity regarding a
product ramp up in the production schedule due to
a potential product transfer requires the
manufacturing area to look for creative ways to
improve in order to comply with expected ...
Evaluation of Material Management System for Construction Projects
(Polytechnic University of Puerto Rico, 2011)
The Aqueduct and Sewer Authority (AAA) made several improvements at a Water Treatment Plant located on the North Coast, of Puerto Rico with the intention of addressing several compliance issues that were identified by ...
Reduction in Waste of Raw Material Generation N and D of the Manufacturing Processes in a Medical Device Industry
(Polytechnic University of Puerto Rico, 2016)
This article discusses how
the industry of Medical Devices handles
the reduction of waste in manufacturing
processes. Companies have
money losses, that can be reduce with
an optimization of the manufacturing
processes. ...
El Concepto de Materialidad
(Polytechnic University of Puerto Rico, 2016)
En esta investigación se examina
el concepto de materialidad.
Es este un elemento
de relevante importancia
ya que la confianza de los inversionista
se ha visto defraudad por
empresas que han presentado información
...
Diseño de Mezcla de Hormigón Utilizando Vidrio Reciclado de Botellas como Parte del Agregado Fino y Cemento Adicionado con Escoria de Alto Horno
(Polytechnic University of Puerto Rico, 2016)
El presente estudio es la
continuación de un proyecto donde se
realizaron pruebas a hormigones con
vidrio reciclado en sustitución de agregado
fino en un 10%, 20% y 30%. En
esta nueva etapa, el vidrio fue recolectado
de ...
Time Optimization of Gas Chromatography-Mass Spectrometry Method for Controlled Substances Analysis
(Polytechnic University of Puerto Rico, 2016)
An optimization of the
gas chromatography- mass spectrometry
(GC-MS) method was conducted
by establishing a temperature ramp
of 150°C, held by 3 min and raising
at 12°C/min until reaching 300°C,
which from 25.00 min ...