Listar Design Project Articles Master Degree por autor "Torres, Edgar"
Mostrando ítems 41-60 de 78
-
The Increase of Machine Utilization, using SMED, a Lean Manufacturing Tool
Herrero, Ramón V. (Polytechnic University of Puerto Rico, 2013)In this project we will see the application of SMED (Single Minute Exchange Dye) a Lean Manufacturing tool in the Medical Device Industry, and how it helps to reduce the time of changeover in a machine. One of the benefits ... -
Increase Productivity in a Manufacturing Department of a Medical Devices Company
Aponte Nunez, Jonathan (Polytechnic University of Puerto Rico, 2013)In all companies the productivity is a very important metric because is the way to make sure that we optimize our resources and time. Is the way to measure if we are manufacturing as expected and with the required ... -
Installation of a New Cognex Vision System for Quality Inspection on PDS (ATS5889) Machine at Surgical Device Company in the Eastern Region of Puerto Rico
Zeno Hernández, Raúl A. (Polytechnic University of Puerto Rico, 2014)There is a 4-6% scrap on PDS (Protected Disposable Scalpel) machine actual vision system. It is important for the company to manage more efficiently and try to reduce scrap percentage through the entire process of the ... -
Integration of Lean Six Sigma and Automation for Process Optimization in Surface Mount Technology (SMT) Assembly Line
Santana Soto, Doel (Polytechnic University of Puerto Rico, 2012)Abstract - This project was conducted in an Electronic Manufacturing Company that manufactures motor speed controllers for battery-powered and electric vehicles for airport, golf, material handling, and medical mobility ... -
Mapping Study Strategies in the Manufacturing Industry
Colón Vélez, Miguel E. (Polytechnic University of Puerto Rico, 2016)The following article is focused in strategies to conduct Mapping studies for the manufacturing industries. Mapping studies are used to document and control the distribution of environmental conditions in a determined ... -
Margin Increase as a Function of Quote Precision Optimization for Packaging Automation Projects and Services
Ortega Colon, Luz S. (Polytechnic University of Puerto Rico, 2013)This document describes design and development of quote optimization process using margin increase as a critical process response. It analyzes the aspects of estimating project or service in the packaging machinery ... -
Medical Devices Industry versus Aerospace Industry
Camacho Guzmán, Luis Omar (Polytechnic University of Puerto Rico, 2017)Manufacturing or production has been characterized as one of the biggest growth areas of economic sector. It is a very wide field, around about 13 categories of different manufacturing such as: Construction, Electronics, ... -
On Boarding Cycle Time Improvement to Accelerate Recruitment of Store Operations
Muñoz Torres, Bryan (Polytechnic University of Puerto Rico, 2015)Recruitment is a crucial step in all of the companies around the world. Is the process of finding and hiring the best qualified candidate for a job opening, in a timely and cost effective manner, This process also ... -
Optimización y Logística de Materiales en la Compañía ABC
Morales Rivera, Arturo J. (Polytechnic University of Puerto Rico, 2015)A través de este proyecto de diseño se recreará la organización del aluminio de la compañía ABC; con el propósito de optimizar la mano de obra, controlar el inventario con la finalidad de optimizar los procesos, organizar ... -
Optimization of Filters Changes in Dust Collector CPO-1005 for Coating Machine Number 1
Rivera, Evaristo (Polytechnic University of Puerto Rico, 2012)The pharmaceutical industry has dust collectors to remove particulate generated by the coating machines.Actually a pharmaceutical presents a problem in one of the Accela-Cotamachines because ... -
Optimize Batch Transfer between Processing Tanks
Felipe, Agustin (Polytechnic University of Puerto Rico, 2012)Estimates indicate that Diabetes will increase affecting the population worldwide in the future. To mitigate current and future demand, Barceloneta’s Factory 2 needs to improve the MK-0431 manufacturing process. Several ... -
Optimizing Automated Clean-In-Place Operations to Increase Productivity in a Biotechnology Manufacturing Plant
Villanueva González, Rhyan S. (Polytechnic University of Puerto Rico, 2016)Automated Clean-In-Place Operations are an essential part of the manufacturing operations by ensuring a clean state of the equipment and/or transfer lines. However, during a voice of the customer (VOC) and value-adde ... -
Packaging Preventive Maintenance Rationalization and Lean Pilot at a Pharmaceutical Company
Cuadrado Torres, Juan L. (Polytechnic University of Puerto Rico, 2011)Abstract - The downtime developed by the poor maintenance scheduling techniques used in a manufacturing plant produces a huge amount of loses, financially and timely speaking. This project looks to use DMAIC methodology ... -
Packaging Process Improvement in a Manufacturing Environment
González, Rosa L. (Polytechnic University of Puerto Rico, 2014)A manual filling, packaging and labeling process implicates significant labor intensive tasks that will result in non- standard process with high variability. This non-standard process has resulted in more than 20 ... -
Process Optimization for the Suction Low Runners Family Products
Rosado Pabon, Maria del Mar (Polytechnic University of Puerto Rico, 2012)Nowadays the first thought of many manufacturing companies is to increase the headcount number in the manufacturing line once it is found with inconsistency of results in productions or quality problems, this rational ... -
Purified Water SCADA System and Network Infrastructure Upgrade To a ArchestrA Virtual Platform
Duarte, Tatiana (Polytechnic University of Puerto Rico, 2012)Abstract ⎯ Pharmaceutical Manufacturing Industry struggles between maintaining a low cost manufacturing, meeting strict regulations and avoiding obsolescence in their systems. Implementing upgrades to the existing systems ... -
Quality Assessment for the Evaluation of Sample Size Reduction for Continuous In-Process Data
Alomar Bermúdez, Carola E. (Polytechnic University of Puerto Rico, 2012)Statistical tests look for evidence that you can reject the null hypothesis and conclude that your program had an effect. With any statistical test, however, there is always the possibility that you will ... -
Quality Risk Management (QRM) Considerations for Introduction of New Products
Benjamin Rodríguez, Amarilys (Polytechnic University of Puerto Rico, 2015)Quality Risk Management (QRM) is an optional tool to improve product effectiveness and safety by assuring that the recognized risk is at a desired level. Also risk management tools provide a methodology to evaluate ... -
Quality Risk Management for the Evaluation of Potable Water Final Rinse during the Cleaning Process of Granulator Jilter Bags
Mateo Ortiz, Carlos (Polytechnic University of Puerto Rico, 2013)The objective of this article is to describe the application of Quality Risk Management (QRM) approach to assess and manage the risk associated to the impact of using Potable Water during the final rinse process used to ... -
Quality Risk Management Strategies for Computer Systems Validation
Sepúlveda Figueroa, Héctor (Polytechnic University of Puerto Rico, 2014)Quality Risk Management is something that has been gaining attention in the regulated industry because it is listed as regulation in various regulatory agencies such as FDA, ICH, ISO, ISPE and other involved regulatory ...