| dc.rights.license | All rights reserved | en_US |
| dc.contributor.advisor | González Miranda, Carlos J. | |
| dc.contributor.author | Castillo Rodríguez, José L. | |
| dc.date.accessioned | 2020-09-09T13:00:14Z | |
| dc.date.available | 2020-09-09T13:00:14Z | |
| dc.date.issued | 2016 | |
| dc.identifier.citation | Castillo Rodríguez, J. L. (2016). Capability of CNC-Mori-Seiki ENDO HEAD [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico. | en_US |
| dc.identifier.uri | http://hdl.handle.net/20.500.12475/521 | |
| dc.description | Design Project Article for the Graduate Programs at Polytechnic University of Puerto Rico | en_US |
| dc.description.abstract | Endo Head is a product suitable to
perform hemiarthroplasty on any hip joint whose
acetabular conditions are satisfactory. The Endo
Head is a unipolar prosthesis made of CoCr alloy
that consists of a Monobloc prosthetic femoral head
articulated directly with the patient's acetabulum.
Endo Head product at this moment is a product in a
backorder status due to problems in the process in
the machine area. Endo Head is performed in CNC
machines and the project is based in the
determination of real output of this CNC machines.
Capability analysis will be performed to know if the
process is capable. [1]
Key Terms - CNC, CoCr, Capability, Endo
Head, Endo Head. | en_US |
| dc.language.iso | en_US | en_US |
| dc.publisher | Polytechnic University of Puerto Rico | en_US |
| dc.relation.ispartof | Manufacturing Engineering; | |
| dc.relation.ispartofseries | Spring-2016; | |
| dc.relation.haspart | San Juan | en_US |
| dc.subject.lcsh | Artificial joints | |
| dc.subject.lcsh | Six sigma (Quality control standard) | |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Research | |
| dc.title | Capability of CNC-Mori-Seiki ENDO HEAD | en_US |
| dc.type | Article | en_US |
| dc.rights.holder | Polytechnic University of Puerto Rico, Graduate School | en_US |
