Auflistung Manufacturing Engineering nach Titel
Anzeige der Dokumente 233-252 von 344
-
Optimization of Project Management Software’s and Applications for Tracking and Report Projects in the Engineering Aerospace Industry of Design Services
(Polytechnic University of Puerto Rico, 2022)The aerospace design industry constantly faces numerous challenges. Many of these challenges are related to the process scenario, service provided or product. Most of the designs are made ... -
Optimization of the Qualification Process to Improve Products and Services in a Telecommunication Industry
(Polytechnic University of Puerto Rico, 2013)This design was based on standardizing the qualification process, reduce the time to increase production and improve the process of updating the information on the server. The Kaizen event helped to solve different ... -
Optimization of Tooling Design Process for Assembly of Motor Parts
(Polytechnic University of Puerto Rico, 2019)This project developed a DMAIC process to start improving the results of a new task been performed in the company [1]. The project will focus on improving the quality and turnaround time of the work performed. the ... -
Optimize Batch Transfer between Processing Tanks
(Polytechnic University of Puerto Rico, 2012)Estimates indicate that Diabetes will increase affecting the population worldwide in the future. To mitigate current and future demand, Barceloneta’s Factory 2 needs to improve the MK-0431 manufacturing process. Several ... -
Optimizing an Airplane Generator in the Manufacturing Stage
(Polytechnic University of Puerto Rico, 2022)Developing an airplane generator is an engineering challenge that takes planning, designing, brainstorming and, manufacturing of the final design. After all the planning is done, the manufacturing process sequence is ... -
Optimizing Automated Clean-In-Place Operations to Increase Productivity in a Biotechnology Manufacturing Plant
(Polytechnic University of Puerto Rico, 2016)Automated Clean-In-Place Operations are an essential part of the manufacturing operations by ensuring a clean state of the equipment and/or transfer lines. However, during a voice of the customer (VOC) and value-adde ... -
Output Improvement for a Blister Packaging Line using Lean/Six Sigma
(Polytechnic University of Puerto Rico, 2011)Abstract - With the pass of the years industries are looking to reduce costs associated to packaging process. In the packaging line analyzed for this project product is packed in blister cells at primary packaging by two ... -
Packaging Line Efficiency Improvements with the Implementation of a Centralized Packaging Line Control System
(Polytechnic University of Puerto Rico, 2015)Efficiency is a process measurement of the ability of generating a required output with the minimum amount of resources. A high efficiency is crucial for a packaging line as it is an important aspect of cost control ... -
Packaging Lines Minor & Minor/Major Changeover Time Reduction on a Pharmaceutical Company
(Polytechnic University of Puerto Rico, 2015)Every company that wants to be competitive has to implement SMED or changeover reduction in every process that this technique could be applied. The two major difficulties that companies encounters are: Product ... -
Packaging Preventive Maintenance Rationalization and Lean Pilot at a Pharmaceutical Company
(Polytechnic University of Puerto Rico, 2011)Abstract - The downtime developed by the poor maintenance scheduling techniques used in a manufacturing plant produces a huge amount of loses, financially and timely speaking. This project looks to use DMAIC methodology ... -
Packaging Process Improvement in a Manufacturing Environment
(Polytechnic University of Puerto Rico, 2014)A manual filling, packaging and labeling process implicates significant labor intensive tasks that will result in non- standard process with high variability. This non-standard process has resulted in more than 20 ... -
Paperless Harness/Cables Fabrication
(Polytechnic University of Puerto Rico, 2022)This project focused on Paperless Harness/Cables Fabrication for Documentation Control in an aerospace company. Documentation control improves paperwork handling, the gathering and filling of all the documentation ... -
Parenterals Vial Manufacturing Filling Area Yield Improvement Project
(Polytechnic University of Puerto Rico, 2015)In the Parenterals Pharmaceutical industry a quality, financial and manufacturing measure of how the process is being operated and that measures the appropriate use of materials, excipients, and active product ingredients ... -
Particle detection tool for liquid product inspection machines
(Polytechnic University of Puerto Rico, 2019)Improvements opportunities were found during the inspection process of recent manufactured lots in new manufacturing single-use technology, which was validated due to expected increase in product demand. An increase ... -
Parts Washer Filling Load Optimization
(Polytechnic University of Puerto Rico, 2020)Parts washers are used in new manufacturing and remanufacturing processes; they are designed to clean, degrease and dry bulk loads of small or large parts in preparation for assembly, inspection, surface treatment, ... -
Plc Modification for Fill and Close Stopping Sequence Improvement
(Polytechnic University of Puerto Rico, 2020)From November 2020 to January 2021, an analysis was made looking for the best way to increase the yield of the machines in charge of the dry process when making a contact lens. In this analysis, it was discovered that ... -
Potable Water Quality Improvement in a Water Filtration Plant Facility
(Polytechnic University of Puerto Rico, 2013)The processes used for treatment in water plants depend on the quality of the source and the desired quality of the water. The chemicals selected for the treatment depend on the effectiveness to obtain the desired ... -
Potting Process Improvement for Inductors
(Polytechnic University of Puerto Rico, 2015)During the last 20 years, X Aerospace Company has produced enormous gains due to a relentless focus on process in manufacturing, engineering and research and development. These margin increases came from many incremental ... -
PPAP Process and Correlation Study for Vision Systems
(Polytechnic University of Puerto Rico, 2021)The Production Part Approval Process (PPAP) is being adopted by Medical Device companies to qualify raw material. To standardized qualification processes between multiple supplies and help ... -
PRM Operations Cores Cell Takt Time Kaizen
(Polytechnic University of Puerto Rico, 2015)This article refers to, how UTAS handles the optimization of a CORE a cell in the manufacturing process. Companies have waste that can be reduce with an optimization of the manufacturing process. Steps to accomplish ...