Listar Manufacturing Engineering por autor "González Miranda, Carlos J."
Mostrando ítems 21-40 de 77
-
Implementación de Estrategias para lograr Cero- Errores o Defectos En las Operaciones durante Proceso de Granulación
Saldaña Piñero, Coral D. (Polytechnic University of Puerto Rico, 2012)Sipnósis- Un producto realizado con errores en documentación, pone en riesgo la efectividad, autenticidad y la integridad del mismo. Es por esto que debemos evitar cualquier desviación en el proceso, realizando una ... -
Implementación de programa para la prevención de mosquitos
González Colón, Karla M. (Polytechnic University of Puerto Rico, 2022)Se utilizó la metodología DMAIC para implementar un programa para la prevención de mosquitos. Para el desarrollo del proyecto, fue necesario definirlos aspectos básicos para resolver el problema, identificar ... -
Implementation of an alternate single use system used to store buffer solutions of Product X
Villarrubia Pérez, Juleika (Polytechnic University of Puerto Rico, 2022)This research project was focused on the implementation of an alternate material used in the preparation of buffers of the production for Product X in a biotechnology company. Buffers are solutions that can resist pH change ... -
Implementation Plan of Electronic Batch Record System for Code X manufactured in Cell Y Using a Project Management Technique
Blanco, Jerry (Polytechnic University of Puerto Rico, 2014)This research project was focused to develop a plan for electronic batch record implementation using a project management technique for machine JB in a cell of a Medical Device Company. The implementation should be ... -
Improvement and Design of a Kitchen Using DMADV Methodology
Carradero Torres, Néstor (Polytechnic University of Puerto Rico, 2023)This design project will focus on remodeling a kitchen for an elderly person. The kitchen that is going to be remodeled has a peninsula or G-shaped layout design. The new design that will be introduced aims to save time ... -
Improvement of Order-Processing Process at a Pharmacy
Ortiz, José (Polytechnic University of Puerto Rico, 2020)This project explored an improvement in the time that pharmacy employees took to find medicines from the back of the pharmacy. The Six Sigma´s DMAIC method (Define, Measure, Improve, Analyze and Control) was employed ... -
Improving a Dialysis Center Construction Project: A Lean Perspective
Santiago Rubero, Carlos J. (Polytechnic University of Puerto Rico, 2017)Due to the necessity of the construction of new facilities for healthcare, the Lean tools are applied in a construction project. Specifically, in the construction of a new facilities for a dialysis center, to reduce ... -
Improving Customer Satisfaction through Property Operations in Hospitality Industry
Serrano Rodriguez, Rafael (Polytechnic University of Puerto Rico, 2013)Corrective Maintenance used to be the most common course of action in both service and manufacturing industry. Even though the new tendencies are moving towards Preventive Maintenance, many industries are stuck in the ... -
Improving the custom-built applications computerized system validation lifecycle for a medical device company
Figueroa Pabón, Elizabeth (Polytechnic University of Puerto Rico, 2019)This research project was focused in the improvement of the Custom-Built Applications Computerized System Validation Lifecycle for a Medical Device Company. A Computerized System Validation is the process of documenting ... -
Improving Tools and Techniques for Obsolescence Management in Defense and Space Microelectronics Systems
Rodríguez Morales, Agustín Ángel (Polytechnic University of Puerto Rico, 2023)The rapid evolution of the defense and aerospace industry has created the needs of procurement specialized electronics, this along with technological evolution, market changes, international relationships, environmental ... -
Increase of Packaging Line Capacity using Lean Manufacturing
Rosado Pagán, Pedro (Polytechnic University of Puerto Rico, 2016)The main purpose of this project is to implement Lean Manufacturing practices and techniques in the packaging area at a Manufacturing Plant. Concepts like Kaizen ideas (continuous improvement), SMED and process excellence ... -
Increase Quantity Per Production Orders for OBI Intraocular Lenses
Cordero Atiles, Linda M. (Polytechnic University of Puerto Rico, 2020)The right order quantity can often drive your costs down and the quality up. This is because larger orders tend to give you more influence and control at a factory level. Factories are rarely totally independent and ... -
Increased Efficiency for Compression Setup and Startup Processes
Alvarado Torrech, Liza (Polytechnic University of Puerto Rico, 2017)This research project is focused in the Increased Efficiency for Compression Setup and Startup Processes. The machine compressors are the Table Press 3200i, it is a double sided rotary press used to produce mono and ... -
Lean Six Sigma: Process Improvement at Hospital X’s Emergency Department
Torres Torres, Elis Nanay (Polytechnic University of Puerto Rico, 2017)The opportunity to establish and outcome some frequently used industrial and process engineering tools in a 28-bed, hospital emergency department (ED), located in Puerto Rico, was presented to CIRACET Corp. With ... -
LED vs HPS en la Industria Farmacéutica
Aguirre Enchautegui, Luis A. (Polytechnic University of Puerto Rico, 2014)Actualmente uno de los factores que más afecta la industria farmacéutica en Puerto Rico es el alto costo de la energía eléctrica en el país. Basándonos en este punto obtuvimos la idea central de este artículo. En este ... -
Managing Manufacturing Maturity and Risks by Applying Department of Defense Manufacturing Readiness Assessment and Manufacturing Readiness Levels Process to a Military Weapons System
Vélez Rivera, Luis E. (Polytechnic University of Puerto Rico, 2015)In the 1990’s the Department of Defense, as part of the Acquisition Process Reform, started reducing and eliminating Manufacturing and Quality Assurance instructions, guidance, Mil-Specs and Standards, relying on the ... -
Manufacturing Process Coordination through Visual Analytics Tools
Concepción, Alex Jaime (Polytechnic University of Puerto Rico, 2022)This research project was focused on the identification of requirements and the design of a software application toolset, which facilitates and improve the coordination of pharmaceutical manufacturing production steps. The ... -
Manufacturing space optimization and productivity improvement using lean manufacturing on a medical device company
Maldonado Vargas, Jonathan (Polytechnic University of Puerto Rico, 2018)Medical Devices industry has been experiencing a competitive environment and striving hard to find methods to reduce manufacturing cost, waste and improve quality. To be competitive, the industry is seeking for tools ... -
Manufacturing Traceability System Replacement to Maintain Business Continuity in a Medical Device Company
Quijano González, Carmen (Polytechnic University of Puerto Rico, 2012)Abstract - This project was focused in the Manufacturing Traceability System Replacement in a Medical Device Company. The existing Manufacturing Traceability System is obsoleted, therefore, a new Traceability system is ... -
Material Qualification Process Improvement to Reduce the Cycle Time
Negrón Marín, Abidanese (Polytechnic University of Puerto Rico, 2019)This project was focused in improving the material qualification process, reducing the cycle time. A Documentation Checklist and Tracking Sheet System were created as part of the improvements. The Documentation Checklist ...