ListarManufacturing Engineering por tema "Lean manufacturing"
Mostrando ítems 21-40 de 71
-
Implementación de un Sistema Lean de Digitalización de Reportes en una Facilidad Universitaria
(Polytechnic University of Puerto Rico, 2016)Se utiliza metodologías de Lean para evitar el gasto excesivo de papeles, utilizados en la impresión de los informes creados en la oficina de Sistemas de Información. Este método conlleva que las peticiones de los ... -
Implementation and Replacement of an Engineering Drawing Solution in a Pharmaceutical Manufacturing from an Information Technology Standpoint
(Polytechnic University of Puerto Rico, 2016)The pharmaceutical industry is a highly and strictly regulated environment. The quality, support and management of its processes and data generated are important aspects this type of industry needs to sustain. The ... -
Implementation of Lean Methodologies in the Small Radiology Firm Bayamón Radiology Center
(Polytechnic University of Puerto Rico, 2019)The Lean methodology was used to reduce examination cycle and lead times for the radiology clinic Bayamon Radiology Center. They clinic had a conventional X-ray system that uses x-ray films. Voice of the Customer and ... -
Implementation of Lean Six Sigma in a Manufacturing Cell of Orthopedic Devices to Reduce Waste
(Polytechnic University of Puerto Rico, 2012)Abstract - Lean practices with Six Sigma methodology has been successfully applied in many industries to ensure the reduction of wastes and improve product quality. In this case study, the proposed implementation of lean ... -
Implementing a Compressed Air Leak Preventive and Repair Program
(Polytechnic University of Puerto Rico, 2013)In recent years the energy cost in Puerto Rico has been constantly increasing. The reasons vary from more expensive fuel costs, new environmental regulations requirements and inefficiencies in the system. The major ... -
Implementing Lean Manufacturing to the Breaker X Final Assembly Line
(Polytechnic University of Puerto Rico, 2011)Abstract - Lean manufacturing is a practice based on preserving the value of a product or service, with the minimum work and materials required to complete it. It is derived from the Toyota Production System and concentrates ... -
Implementing Quality Management Techniques into a Dental Office for Improving Performance of the Operations
(Polytechnic University of Puerto Rico, 2012)Abstract - The objective of this research is to improve operations of a dental office by the application of Quality techniques. In this research, the performance of the actual process was evaluated and categorized to achieve ... -
Improve Material Flow at Supplier
(Polytechnic University of Puerto Rico, 2012)Abstract ⎯ This project will be focused in reducing the high lead time that characterizes one of the suppliers in a Medical Device Organization. By reducing the lead time of this supplier, the organization expects to have ... -
Improvement of a Public Utility Authority Complaint Responding System
(Polytechnic University of Puerto Rico, 2012)Abstract - This project will be conducted in the Operations Department of a Public Utility Authority. The project will focus on the improvement of the agency complaints respond service. The Six Sigma DMAIC model was used ... -
Improvement of the Statistical Techniques Quality System Element in a Medical Device Industry
(Polytechnic University of Puerto Rico, 2012)Abstract - This project is focused on reducing the compliance risk of a Medical Device Manufacturer by improving its Statistical Techniques Quality System Element. Lean Sigma Methodology was used to identify the inputs or ... -
Improvement to a Medical Device Packaging Output Using Lean Six Sigma Tools
(Polytechnic University of Puerto Rico, 2012)Packaging is the science, art, and technology of enclosing or protecting products for distribution, storage, sale, and use. Mainly, the packaging of a product assures the quality of the product to the end user after its ... -
Improving a Dialysis Center Construction Project: A Lean Perspective
(Polytechnic University of Puerto Rico, 2017)Due to the necessity of the construction of new facilities for healthcare, the Lean tools are applied in a construction project. Specifically, in the construction of a new facilities for a dialysis center, to reduce ... -
Improving Cost Estimating Process in the Aerospace Industry Projects
(Polytechnic University of Puerto Rico, 2016)The cost estimation process in the aerospace industry is very important since this process help them to negotiate with the suppliers better offers and optimize the manufacturing process. The process is recent in this ... -
Increase of Manufacturing Process Output
(Polytechnic University of Puerto Rico, 2020)Haemonetics Puerto Rico, a medical devices manufacturing site of blood filters, identified that approximately the 11% of the monthly plan of the manufacturing line #3 cannot be made using the available manufacturing ... -
Increase of Packaging Line Capacity using Lean Manufacturing
(Polytechnic University of Puerto Rico, 2016)The main purpose of this project is to implement Lean Manufacturing practices and techniques in the packaging area at a Manufacturing Plant. Concepts like Kaizen ideas (continuous improvement), SMED and process excellence ... -
Increase the Efficiency and Capacity of the Manufacturing Process for Product X Applying Lean Six Sigma Methodology
(Polytechnic University of Puerto Rico, 2014)This project was done in a food manufacturing industry that sells its product in bags. This company has many products, but this work was made focused in one product that represent 50% of the production and is packed ... -
Integration of Lean Six Sigma and Automation for Process Optimization in Surface Mount Technology (SMT) Assembly Line
(Polytechnic University of Puerto Rico, 2012)Abstract - This project was conducted in an Electronic Manufacturing Company that manufactures motor speed controllers for battery-powered and electric vehicles for airport, golf, material handling, and medical mobility ... -
Lean and Safe Manufacturing for an Antidepressant Tablets Coating Process
(Polytechnic University of Puerto Rico, 2009)Abstract - The Lean and Safe Manufacturing Process (6S event) was selected for implementation in an antidepressant tablets coating manufacturing process. The coating process was identified due to the utilization of toxic ... -
Lean Implementation in a Turbocharger Service Shop
(Polytechnic University of Puerto Rico, 2014)In many of the manufacturing and repair shops, the use of industrial machinery is required to perform most production or repair efforts. A Turbo Service repair shop was identified due to its needs of Lean tools and ... -
Lean Manufacturing Implementation to Improve Process Capability and Performance
(Polytechnic University of Puerto Rico, 2022)Industries has been continuously evolving with the change in tendencies and market growth of products. To be capable of maintaining the organization competitiveness, in front of an aggressive market, ...