Buscar
Mostrando ítems 31-40 de 48
System Performance Laboratory Optimization
(Polytechnic University of Puerto Rico, 2019)
This project seeks to optimize the
efficiency of a medical device laboratory process
applying tools of the Lean Six Sigma methodology
and eliminating non-value activities to complete
transfer of a new product avoiding ...
Filling Process Yield Improvements
(Polytechnic University of Puerto Rico, 2019)
Misus Winery is a wine making and
distribution plant. Its main product is Cherry
Blossom which is a pink wine. The high demand for
its product has created the need to make
improvements in their processes. As part of ...
Coronary Guide Wires Abbott Vascular
(Polytechnic University of Puerto Rico, 2019)
Abbott Vascular produces guide wires
which are designed to navigate vessels to reach a
lesion or vessel segment. Once the tip of the device
arrives at its destination, it acts as a guide so that
larger catheters can ...
Implementación de Proceso de Descarte de Productos Intravenosos en una Planta de Productos Farmacéuticos
(Polytechnic University of Puerto Rico, 2019)
Durante el pasado año, se
descartaron 2.7 millones de unidades debido a
distintos problemas de calidad. Baxter es una
compañía manufacturera de dispositivos médicos
que lleva 60 años en el pueblo de Jayuya, Puerto
Rico. ...
Optimization of a Pharmaceutical Filling Process to Comply with Federal Regulations and Minimize Process Variability
(Polytechnic University of Puerto Rico, 2019)
This article analyzes the scientific
methodology that was followed to solve a problem
that arose in a pharmaceutical installation after a
federal regulatory inspection. The route for a robust
solution was framed by a ...
In-process Testing Redesign in Packaging Line of Oral Solid Dosage
(Polytechnic University of Puerto Rico, 2019)
Packaging process area request to
redesign the in-process testing to reduce waste and
increase the efficiency during the in-process testing
activities without increase in the defective unit
found by Quality during their ...
Process Optimization of Amine Reactions
(Polytechnic University of Puerto Rico, 2018)
Ospira is an inhalation anesthesia
manufacturing facility. The main products are
Deramine and Dexoflurane. To produce these
anesthetics, chemical reactions and distillation
processes are required. For Deramine it ...
Design and Implementation of Laser Marking with OCR/OCV Vision Inspection System
(Polytechnic University of Puerto Rico, 2018)
The laser marking process is aimed to
create a permanent identification and/or
descriptive information on the surface of metallic
spinal implants to provide full traceability for the
products being manufactured at ...
Validación de Limpieza: Extensión Largo de Campaña para una Tómbola de Sellado y Equipos Auxiliares
(Polytechnic University of Puerto Rico, 2019)
La validación de los procesos de
limpieza, tiene un rol fundamental en la reducción
de contaminación en los equipos de fabricación
industrial de medicamentos. La misma nos ayuda a
demostrar que nuestros procedimientos ...
Clean Room Differential Pressure Monitoring Improvements
(Polytechnic University of Puerto Rico, 2019)
Manufacturing of oral solid dosage
(OSD) forms, such tablets and capsules, is
performed in a highly regulated environment. One
of the guidelines used to provide the minimum
requirements that a manufacturer must meet ...