Mostrar el registro sencillo del ítem
Difference Between Ribbed or Dimpled Systems
| dc.rights.license | All rights reserved | en_US |
| dc.contributor.advisor | Restrepo Torres, Bernardo | |
| dc.contributor.author | Ortiz Andujar, Angel J. | |
| dc.date.accessioned | 2024-02-28T14:31:48Z | |
| dc.date.available | 2024-02-28T14:31:48Z | |
| dc.date.issued | 2023 | |
| dc.identifier.citation | Ortiz Andujar, A. J. (2023). Difference Between Ribbed or Dimpled Systems [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico. | en_US |
| dc.identifier.uri | http://hdl.handle.net/20.500.12475/2209 | |
| dc.description | Design Project Article for the Graduate Programs at Polytechnic University of Puerto Rico | en_US |
| dc.description.abstract | The purpose of this design project is to compare the heat transfer and pressure drop phenomena in different cases. The project was carried out with two different models, that is, a channel with ribs and another with dimples with numerical data at different Reynolds Numbers. The numerical study was carried out with the Flow simulation method. The result shows that for both channels with ribs and dimples there were no significant changes due to the geometry selected in this project. However, the friction factor is comparatively higher for both geometries with the lower Reynol numbers used. Key Terms ⎯ Dimples, Gas turbine, Internal cooling, Ribs. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Polytechnic University of Puerto Rico | en_US |
| dc.relation.ispartof | Mechanical Engineering; | |
| dc.relation.ispartofseries | Winter-2023; | |
| dc.relation.haspart | San Juan | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Research | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Subject headings--Unassigned | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Posters | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate School--Master in Engineering Management degree | en_US |
| dc.title | Difference Between Ribbed or Dimpled Systems | en_US |
| dc.type | Article | en_US |
| dc.rights.holder | Polytechnic University of Puerto Rico, Graduate School | en_US |
Ficheros en el ítem
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
Mechanical Engineering
Artículos de Proyectos de Ingeniería Mecánica