Suche
Anzeige der Dokumente 1-10 von 23
Cycle Time Reduction using Lean Manufacturing Techniques for a Solid Pharmaceutical Product
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ The purpose of this project was to demonstrate that the Lean Manufacturing techniques could be applied to a Solid Pharmaceutical Product in order to reduce the cycle time. During the year 2007, the Solid ...
Setup Time Reduction in the Water for Injection Sampling Process on the Pharmaceutical Industry
(Polytechnic University of Puerto Rico, 2020)
This work consists in the development of
a new WFI sampling route that will bring several
important benefits to the pharmaceutical industry.
Reduction in the setup time will improve daily
operations in terms of efficiency, ...
Determination of In-Processing Manufacturing Impact into Elution Rate of Drug Eluting Steroid Collars
(Polytechnic University of Puerto Rico, 2012)
Abstract - The Food and Drug Administration provides regulations for combination products. The medical device industry needs to comply with these regulations specifically in products containing drug. One of the many ...
Lean and Safe Manufacturing for an Antidepressant Tablets Coating Process
(Polytechnic University of Puerto Rico, 2009)
Abstract - The Lean and Safe Manufacturing Process (6S event) was selected for implementation in an antidepressant tablets coating manufacturing process. The coating process was identified due to the utilization of toxic ...
Application of DMAIC Methodology to Improve the Utilization of an Industrial Glassware Washer System in a Biopharmaceutical Industry
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ This article describe how the problem solving approach of Define, Measure, Analyze, Implement and Control (DMAIC) is applied to increase the utilization of an industrial glassware washer system in a Biopharmaceutical ...
Optimization of On-Line Automated Dissolution System for Solid Dose Control Release Tablets
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ An optimization of an automated dissolution system for control release tablets has been accomplished by the implementation of several variables using Six Sigma tools. Variables under evaluation includes: filter ...
Evaluation to Sleeves Used in Granulation Department for the Graduate Programs at Polytechnic University of Puerto Rico
(Polytechnic University of Puerto Rico, 2021)
The DMAIC methodology was applied to analyze a manufacturing system at Johnson & Johnson Pharmaceuticalsin Las Piedras, Puerto Rico. The methodology was used to improve the time for changing and ...
Coating Process Improvement
(Polytechnic University of Puerto Rico, 2021)
An increase in the number of events associated to AQLfailure that resulted on partial batch rejections was observed in 2020 for Tablets/Caplets formulations due to cosmetic conditions ...
Handling and Managing of Vial Rejects
(Polytechnic University of Puerto Rico, 2021)
A large accumulation of filled vial
rejects generated in an aseptic filling line of a
parenteral medication was identified to be in the
custody of the Quality Assurance department
indefinitely. Using the DMAIC methodology ...
Process Time Reduction in Manufacturing Areas: Visual Valves Identification on Manufacturing Area specifically on Media Prep Area, Media Preparation tanks to Pursue Agility on the Visual inspections required before, during and after the Media Prep Solution are Prepared
(Polytechnic University of Puerto Rico, 2022)
Time of production process and associate activities were evaluated for Media Prep manufacturing process on Juncos, P.R. The voice of the customer requested reduced time inspection process before, ...