Buscar
Mostrando ítems 1-10 de 28
Battery Assembly Re-design in a Medical Device Company
(Polytechnic University of Puerto Rico, 2012)
Abstract - Today, customer complaints is a strategic business metric for the organizations to measure the customer satisfaction and product’s performance. During YR2011, an adverse trend on complaints per million (CPMs) ...
Reducción del Tiempo de Proceso para la Manufactura del Catéter de Bonanno
(Polytechnic University of Puerto Rico, 2011)
Abstracto - Este proyecto fue llevado a cabo en una planta de dispositivos médicos. Su propósito fue estudiar el proceso de manufactura del catéter del producto Bonanno para encontrar oportunidades reduciendo un 15% el ...
Implementación de Lean y Seis Sigma para mejorar una celda de producción de neuroestimuladores
(Universidad Politécnica de Puerto Rico, 2020)
En el presente artículo se aborda un problema de una empresa de la industria de dispositivos médicos en República Dominicana que necesita aumentar el “throughput” de una línea de producción de neuroestimuladores en al menos ...
Improve Material Flow at Supplier
(Polytechnic University of Puerto Rico, 2012)
Abstract ⎯ This project will be focused in reducing the high lead time that characterizes one of the suppliers in a Medical Device Organization. By reducing the lead time of this supplier, the organization expects to have ...
Tracking System for Useful Life of an Insulin Pump Motor
(Polytechnic University of Puerto Rico, 2016)
This research project was focused in
the implementation of a Tracking System for the
useful life of an infusion pump’s motor. This
component is a sub-assembly of the infusion pump
which is used to deliver fluids into ...
Design of methodology to uncontrolled documents assessments for quality department
(Polytechnic University of Puerto Rico, 2015)
A medical device company embarked
on the journey of developing a program of control
of possible human errors that can be applied in any
place of manufacture. The project is based on the
creation of a methodology to ...
Workmanship Error at Assembly Line in a Medical Device Company
(Polytechnic University of Puerto Rico, 2012)
Abstract — In a Medical Device Company a production line had an increase of non-conformances in 2011. The category for the increase was workmanship error. These failures result in cost of poor quality due to quality holds. ...
Surgical Technologies Clean Room Lines Capacity Improvement
(Polytechnic University of Puerto Rico, 2015)
In today’s competitive market, medical
device manufacturing companies need to
continuously innovate their products and process in
order to maintain a leader position on the medical
devices industry. Quality and Cost ...
Cost & Cycle Time Reduction and Increased Production on CNC Machines
(Polytechnic University of Puerto Rico, 2014)
There are a lot of different types of
manufacturing industries. Some of the similarities,
in the majority, is the need to reduce cost, cycle
tyme and consequently increase productivity. There
are several methodologies ...
Development and Evaluation of Prototype Heat Shrink Masking Machine
(Polytechnic University of Puerto Rico, 2016)
This design project consists in
developing a prototype equipment to reduce the
heat variability produced by the current heat shrink
installation process. A heat Shrink tubing is a
shrinkable plastic tubing commonly ...