Suche
Anzeige der Dokumente 1-10 von 132
The Increase of Machine Utilization, using SMED, a Lean Manufacturing Tool
(Polytechnic University of Puerto Rico, 2013)
In this project we will see the
application of SMED (Single Minute Exchange
Dye) a Lean Manufacturing tool in the Medical
Device Industry, and how it helps to reduce the
time of changeover in a machine. One of the
benefits ...
Improve the Cycle Time of Stat Testing in Quality Control Laboratory Applying Kaizen Analysis
(Polytechnic University of Puerto Rico, 2013)
Quality Control Laboratory of
Biopharma Company was selected for develop a
design project, using the technique of Kaizen
Project. Manufacturing area of Biotech Company
produces a biological product. Biologic Bulk ...
Validation Analysis of a Plastic Shrinkage Process after an Injection Molding Operation
(Polytechnic University of Puerto Rico, 2013)
A validation process is essential during
the start up of a new mold to ensure that the
product will fulfill the function for which it was
created. One common problem for production is
finding the right parameters to ...
Evaluation of Reagents Used in Solution Preparation to Reduce Reworks in Research and Development Laboratories
(Polytechnic University of Puerto Rico, 2019)
Research and development laboratories
are working with improvements and discovery of
new drugs. As part of their activities, they need
solutions such as Buffers and Mobile Phases for
analytical testing. It was found ...
The Effect of the Vaporized Hydrogen Peroxide Residues in a Trypticase Soy Agar Plates for a New Barrier Isolated Syringe Filling Machine
(Polytechnic University of Puerto Rico, 2011)
This study has been performed to
evaluate the feasibility and adequacy of the
Trypticase Soy Agar (TSA) plates in promoting
growth after being exposed to Vapor Phase
Hydrogen Peroxide (VPHP) decontamination cycle.
This ...
Use of Experimental Design for the Characterization of a Depyrogenation Machine
(Polytechnic University of Puerto Rico, 2010)
Depyrogenation tunnel are used in
pharmaceutical filling lines to sterilize glass
containers before they are aseptically filled. These
tunnels use unidirectional hot air at temperatures
up to 350°C and can be used to ...
Process Optimization by Implementing Lean Six Sigma in an Optical Manufacturing Laboratory
(Polytechnic University of Puerto Rico, 2010)
The Design Project intends to be
implemented in an Optical Manufacturing
Laboratory. This laboratory is located at Mayagüez
with the purpose of distributing ophthalmic lenses
to different optical centers around the ...
Regeneración de Solventes Utilizados en los Procesos de Manufactura y sus Posibles Usos como Combustibles Alternos
(Polytechnic University of Puerto Rico, 2013)
En este proyecto investigativo se
examina la posibilidad de alcanzar beneficios
económicos mediante la maximización de
sustancias consideradas como desperdicios para
algunas compañías. Debido a la diversidad ...
Mejorar la Eficiencia en el Laboratorio Químico de una Farmacéutica a través de Aplicaciones de Metodología de Calidad
(Polytechnic University of Puerto Rico, 2019)
Los laboratorios son de suma
importancia, no solo en las escuelas y
universidades; también lo son para las
investigaciones y las farmacéuticas. Estos son los
encargados de asegurar la calidad de sus productos.
Los ...
Lean Six Sigma Application to reduce cycle time in the waiting process for medical attention in patient with green categorization in adult emergency area in Hospital X
(Polytechnic University of Puerto Rico, 2010)
The service area is one of the healthcare
industries area that are in continuous search to
optimize their process in order to provide a quality
service to their customer (patient). In order to
provide a total to quality ...