| dc.rights.license | All rights reserved | en_US |
| dc.contributor.advisor | Cruzado Vélez, Héctor J. | |
| dc.contributor.author | Fernández Ramos, Adlin M. | |
| dc.date.accessioned | 2024-04-23T19:58:11Z | |
| dc.date.available | 2024-04-23T19:58:11Z | |
| dc.date.issued | 2018 | |
| dc.identifier.citation | Fernández Ramos, A. M. (2018). Transform the Manufacturing of Dental Molded Products into a Lean Process [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico. | en_US |
| dc.identifier.uri | http://hdl.handle.net/20.500.12475/2454 | |
| dc.description | Design Project Article for the Graduate Programs at Polytechnic University of Puerto Rico | en_US |
| dc.description.abstract | The Non-Conformance process in a manufacturing company is known for delaying the product delivery to the customer due to having the product quarantined during the investigation phase. In some instances, this non-conformance process provides value as new causes are investigated, but in a molding process the cause for flash tends to be the same. Therefore, a new process workflow was created were the rework of this flash would be performed instantly as it is found instead of creating a non-conformance. In addition, a preventive maintenance program is known to greatly reduce defects on the products if performed correctly. With these new processes, the end goal of delivering the product to the customer faster is being achieved.
Key Terms ⎯ Flash, Injection, Maintenance, Non-Conformance, Rework, Tool. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Polytechnic University of Puerto Rico | en_US |
| dc.relation.ispartof | Management; | |
| dc.relation.ispartofseries | Spring-2018; | |
| dc.relation.haspart | San Juan | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Research | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Subject headings--Unassigned | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate students--Posters | en_US |
| dc.subject.lcsh | Polytechnic University of Puerto Rico--Graduate School--Master in Engineering Management degree | en_US |
| dc.title | Transform the Manufacturing of Dental Molded Products into a Lean Process | en_US |
| dc.type | Poster | en_US |
| dc.rights.holder | Polytechnic University of Puerto Rico, Graduate School | en_US |
