Listar Design Project Articles Master Degree por título
Mostrando ítems 299-318 de 1490
-
Design Improvement in the Workspace for Waste Reduction and Process Optimization
(Polytechnic University of Puerto Rico, 2023)In this current project will be demonstrated how a layout in the workspace can impact the efficiency of a process. An optimal design in the location of equipment and materials needed to execute a task can reduce all those ... -
Design Methodology of Clean Room Overtime Reduction in a Medical Device Plant
(Polytechnic University of Puerto Rico, 2015)According to the last year data in a medical device company, the packaging shipped units are increasing by the last eight months. The packaging clean room headcount are generate too much overtime affecting the finance ... -
Design Methodology of Production Improvement at “X Hydroponic Farm”
(Polytechnic University of Puerto Rico, 2016)According to “X Hydroponic Farm” facilities, a 40 x 60 square feet farm, with a capacity of producing 750 plants weekly; and actual production rate of 250 plants a week, is expecting a demand increase of approximately 60%. ... -
Design of a Brewery Manufacturing Process for a Small Starting Scale
(Polytechnic University of Puerto Rico, 2014)In this paper will be about the process and requirement to create a facility for brewery in order to implement Pilot Plant services. This project has a scope of preparing a Pilot plant focused in the opportunity of ... -
Design of a Cleaning Change Over Reduction Strategy for a High Volume Product in a Packaging Line
(Polytechnic University of Puerto Rico, 2010)Currently packaging operations are trying to reduce the downtime and operational cost among others activities to enhance efficiency and overall process performance. Based on this objective, pharmaceutical packaging ... -
Design of a Double Pipe Heat Exchanger in Counter Flow Configuration Using Numerical Analysis
(Polytechnic University of Puerto Rico, 2022)The Double Pipe Heat Exchanger in counter flow configuration consists of one fluids flow from the inner pipe while the other flows in the opposite direction from the outer pipe. This project analyzed and designed this heat ... -
Design of a Framework for the Best Practices in Computer Forensics within the Cybersecurity Infrastructure in the Regulated Industry
(Polytechnic University of Puerto Rico, 2019)We cannot ignore the fact that hackers have been evolving and growing to the level that there are more hackers with the attraction to do evil than Ethical Hackers. Cyber-attacks are a growing threat for companies, and ... -
Design of a Quality Management in Operations of Metrotrans, Inc. using DMADV Methodology
(Polytechnic University of Puerto Rico, 2016)This research will be focusing on the design of a quality system in operations of transportation for the company Metrotrans, Inc. The design shall establish the timing of the operations related to the services offered ... -
The Design of a Risk and Vulnerability Assessment Procedure for a Banking Institution
(Polytechnic University of Puerto Rico, 2015)Regulations in banks are changing constantly and becoming stricter. Threats and technologies are improving. Most antivirus software update their virus definition when the malware is released and attacking. Banks need ... -
Design of a Structured Network Cabling Applying International Standards
(Polytechnic University of Puerto Rico, 2014)This article is designed to present and illustrate the need for the requirement of the technical specifications around the development of applicable international standards for structured cabling. One of the main ... -
Design of Cantilever and Gabion Retaining Walls for Slope Failure Caused by Hurricane Maria in Lares, PR
(Polytechnic University of Puerto Rico, 2020)Due to the rain caused by Hurricane Maria there were various slope failures around Puerto Rico (PR). This project evaluates a failure in Lares, PR, road PR-124. The evaluation consists in mitigate that failure with two ... -
Design of Human Error Prevention Program for Manufacturing Processes
(Polytechnic University of Puerto Rico, 2014)During the 2012 Quality Management Review, Stryker Corporation identified that 20% of the company wide Product Field Actions were due to human factor related incidents. The goal of this project was to develop a Human ... -
Design of methodology to uncontrolled documents assessments for quality department
(Polytechnic University of Puerto Rico, 2015)A medical device company embarked on the journey of developing a program of control of possible human errors that can be applied in any place of manufacture. The project is based on the creation of a methodology to ... -
Design Project for Process Improvement of the Manufacturing of Electrode Ring –Monolithic Controlled Released Devices (MCRDs)
(Polytechnic University of Puerto Rico, 2021)Medtronic Rice Creek Pharmaceutical Operations at Fridley, Minnesota currently build the Electrode Ring, Monolithic Controlled Released Device (MCRD) assembly which is sent to Medtronic Villalba ... -
Designing a Standardized Process Flow for Regulatory R&D Service Center: A Design for Lean Six Sigma DMADV Case Study
(Polytechnic University of Puerto Rico, 2022)Lean Six Sigma has great impact in the removal of non-value-adding activities and improving business performance. It does so by applying tools and techniques to eliminate waste, and focus on implementing strategies to ... -
Designing an LSD Micro-Dose Transdermal Patch for Mental Illness Drug Therapy
(Polytechnic University of Puerto Rico, 2020)There is a very high incidence of mental health problems throughout the world, Depression, Post Traumatic Stress Disorder (PTSD), traumas, Schizophrenia, etc. Psychedelics have been in history for a long time now, used ... -
Designing Database Interfaces using a Human Computer Interaction Approach
(Polytechnic University of Puerto Rico, 2019)In 1960, Charles W. Bachman designed the Integrated Database System. IBM company, not wanting to be left out, created a database system of their own, known as Information Management System. In the late 1970’s Human ... -
Designing of a Mobile Application for the Pre-Admission Process of a Vocational School
(Polytechnic University of Puerto Rico, 2018)The Department of Education of Puerto Rico (DE), has begun to implement and improve its administrative processes using web technology. Platforms such as SIE (Student Information System), a system that collects, manages ... -
Desmineralización de agua potable para una industria de soluciones farmacéutica
(Polytechnic University of Puerto Rico, 2017)El agua para los procedimientos de fabricación es un problema por el cual pasan empresas en el mundo. Las aguas para uso industrial requieren cualidades que no están disponibles en origen, por lo que deben someterse a ... -
Detección de Incendios Forestales Utilizando Imágenes Multiespectrales en el Bosque Seco de Guánica
(Polytechnic University of Puerto Rico, 2015)En el sur de Puerto Rico, desde los pueblos de Arroyo a Cabo Rojo, se encuentra el área más susceptible a fuegos forestales. Entre los meses de enero a abril, durante la época de sequía, es cuando comienza a aumentar ...