Zur Kurzanzeige

dc.rights.licenseAll rights reserveden_US
dc.contributor.advisorGonzález Miranda, Carlos J.
dc.contributor.authorEstévez Merced, Saynel
dc.date.accessioned2020-08-07T14:35:13Z
dc.date.available2020-08-07T14:35:13Z
dc.date.issued2012
dc.identifier.citationEstéves Merced, S. (2012). Reduction of scrap in manufacturing line B-1 using six sigma manufacturing methodology [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico.en_US
dc.identifier.urihttp://hdl.handle.net/20.500.12475/490
dc.descriptionDesign Project Article for the Graduate Programs at Polytechnic University of Puerto Ricoen_US
dc.description.abstractAbstract - In this research, the focus was in a manufacturing production line of receptacles assembly. The receptacles are the finish good of this production line. In this process the receptacle is build completely starting with the bridge assembly and finishing in the top assembly. DMAIC is the methodology used in this research as Define, Measure Analyze, Improve and Control. DMAIC is a popularized continuous improvement method. Although there is considerable literature available with the Six Sigma implementations, there is very little research published about the experiences implementing step by step some tools. The goal of this research is to minimize 45% the amount of scrap in the process and as a consequence reduce the amount of money that the company is losing due this reason. In this research were used different techniques to maintain a continuous improvement, demonstrating that the DMAIC methodology is a useful one to have an incremental improvement. Key Terms - B-1, DMAIC, Scrap and Six Sigma.en_US
dc.language.isoenen_US
dc.publisherPolytechnic University of Puerto Ricoen_US
dc.relation.ispartofManufacturing Engineering;
dc.relation.ispartofseriesSpring-2012;
dc.relation.haspartSan Juanen_US
dc.subject.lcshSix sigma (Quality control standard)en_US
dc.subject.lcshAssembly-line methodsen_US
dc.subject.lcshManufacturing processes--Quality controlen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Research
dc.titleReduction of Scrap in Manufacturing Line B-1 Using Six Sigma Manufacturing Methodologyen_US
dc.typeArticleen_US
dc.rights.holderPolytechnic University of Puerto Rico, Graduate Schoolen_US


Dateien zu dieser Ressource

Thumbnail

Das Dokument erscheint in:

Zur Kurzanzeige