Auflistung Manufacturing Competitiveness nach Autor "Nieves Castro, Rafael A."
Anzeige der Dokumente 41-60 von 104
-
Feasibility Study of Proposed Manufacturing Layout Re-design to Improve Process Capacity and Reduce Cycle Time of a Downstream Operation of Product A
Aponte Santiago, Lyanne M. (Polytechnic University of Puerto Rico, 2022)Lean Six Sigma tools and methodologies are widely used in today’s work environments. The use of a Lean Six Sigma approach provides organizations more flexibility and efficiency to improve their competitiveness. At the ... -
Globalization and Innovation Encompass with Regulations
Marrero Pagán, Carmen (Polytechnic University of Puerto Rico, 2017)Our economy is outdoing a profound transformation within globalization, innovation and the regulations required for each market. Although the individual elements feel familiar, the combined contours are unprecedented- ... -
How to Reduce the Confirmation Period of Possible Critical Defects Detected During the Quality Assurance Acceptance Sampling Plan for Inspected Drug Product
Cruz Guzmán, Gretchen M. (Polytechnic University of Puerto Rico, 2020)An Acceptance Sampling Plan, or ASP, is a Quality attributes assessment performed during the manual or automated inspection of Drug Products. After inspection, the inspected product then becomes an Inspected Drug ... -
Impact of lean in the inventory process of a clinical laboratory
Pérez Veliz, Diana C. (Polytechnic University of Puerto Rico, 2019)The inventory process of clinical laboratories was evaluated to detect common problems, waste and identify areas of improvement. The objective of this project was to assess the impact of lean in health care environment. ... -
Impacto de la Terminación de las Superficies del Material Base Para la Adherencia en el Proceso de Sobremoldeo
De los Santos Rivera, Bia Pamela (Universidad Politécnica de Puerto Rico, 2020)El sobremoldeo consiste en el moldeo por inyección de una sustancia sobre otra. El propósito de estas tecnologías es producir componentes multifuncionales con una variedad de colores y/o materiales y unir las características ... -
Implementación de Documentación GMP para el Area de Recibo
Álvarez Pereira, Lyannette A. (Polytechnic University of Puerto Rico, 2022)Este proyecto investigativo tiene como propósito mejorar el proceso de la documentación elaborada por parte del Área de Recibo para una Farmacéutica. El objetivo principal es mejorar el ... -
Implementación de Gestión de Sistema de Inventario para Piezas de Repuesto
Colón Ocasio, Kiara E. (Polytechnic University of Puerto Rico, 2018)Para una compañía de transporte, uno de los mayores retos consiste en mantener su flota en funcionamiento, ya que esto representa su mayor fuente de ganancia. De igual manera, el detener la misma por algún desperfecto ... -
Implementación de la Metodología de “Lean Manufacturing” o 5S en una Fábrica de Puertas y Ventanas
Salazar Ciprián, Paola D. (Polytechnic University of Puerto Rico, 2014)El objetivo principal de este proyecto es implementar una nueva forma de organización en una manufactura de puertas y ventanas. Hoy en día muchas compañías fracasan por muchos factores, ya sea por la falta de organización, ... -
Implementación de Lean Six Sigma y las Buenas Prácticas de Almacenamiento en una Empresa Puertorriqueña
Peña González, Paola Emy (Polytechnic University of Puerto Rico, 2022)Las organizaciones de regulación y control han desarrollado normativas a nivel internacional que deben cumplirse en todos los establecimientos que lleven a cabo productos de uso humano. Es por esto, ... -
Implementación de Manufactura Esbelta en el Proceso de Admisión y Área de Servicio dentro de un Decanato a Nivel Postgrado
García Betté, Helen (Polytechnic University of Puerto Rico, 2016)Atrasos en un Decanato a nivel postgrado durante una matricula puede ocasionar errores en el proceso. Es necesario definir el por qué de estas demoras, con el fin de identificar en cuales puntos se está fallando. De ... -
Implementación de Metodología “Lean” en Celda de Manufactura
Caraballo Cruz, José A. (Polytechnic University of Puerto Rico, 2018)Este articulo se enfoca en el estudio, desarrollo e implementación de técnicas de manufactura “Lean” con el objetivo de identificar causas o problemas que están previniendo un nivel de producción adecuado en la compañía ... -
Implementation of a 5S Project to Improve Office Layout and Functionality in a Small Consulting Firm
Ruiz Jiménez, Heidi Vimar (Polytechnic University of Puerto Rico, 2015)Planning is key to improve and maintain daily operations on an office environment, making it a challenge sometimes for small companies to accustom to this. Lack of organization and planning leads to poor usage of time, ... -
Implementation of a 5’S Pilot Program in the Veteran Administration Hospital in San Juan, Puerto Rico
Terc Echevarría, Gladys V. (Polytechnic University of Puerto Rico, 2013)In the recent years, the restructuring of health system has taken an approach to quality control in order to reduce cost and provide better services to patient. However it is a process that requires much work and ... -
Implementation of a Core Engagement and 5S Event QMS Project – DMS Standardization
Picart Santiago, Brenda J. (Polytechnic University of Puerto Rico, 2023)The manufacturing industry is extensive and generally includes businesses that take materials or components and transform them into products. Often, manufacturing firms operate out of factories and plants. In a more ... -
Implementation of Operational Excellence’s Framework on a Local Pizzeria
Agosto Sherman, Kenneth (Polytechnic University of Puerto Rico, 2023)During these last years, due to the economic impact that has arisen in Puerto Rico, all industries have sought to manage, control, and efficiently use their inputs. It is no surprise that this has impacted a local pizzeria, ... -
Implementation of Software Tools for Paperless Processes Oriented in Lean Manufacturing Applied Specifically in the Biotechnology Industry
Fernández Rentas, Maribert (Polytechnic University of Puerto Rico, 2019)Now days, one major cost area in companies getting scrutinized is paper-based business systems. Traditional paper-based methods for creating and delivering documents are expensive. Some of these large costs include: ... -
Improve service and efficiency of LAL kinetic chromogenic method for a combine manufacturing product
Reyes Donatiú, Sheila (Polytechnic University of Puerto Rico, 2018)A new supplier is now validated according to the requirements on the USP <85> Bacterial Endotoxin Test, USP <161>, ANSI/AAMI ST72:2011. This validation is conducted in order to comply with manufacturing and customer ... -
Improvement of the Health Plan Group Invoice Change Submission Process
Gracia Ventura, Eugenia A. (Polytechnic University of Puerto Rico, 2014)Puerto Rico’s health plan industry is constantly growing and creating services specialized to attend specific medical needs. In addition, constant regulatory scrutiny, customerbased technology and medical advancement ... -
Improving the Cleaning Certification Process in the Manufacturing Area
Candelaria Juarbe, Isis N. (Polytechnic University of Puerto Rico, 2023)By addressing the shortcomings and inefficiencies in the present Cleaning Certification procedure used by biotechnology manufacturing companies, this project seeks to modernize and streamline it. The technique experiences ... -
Improving the flow of Sampling Analysis of Manufacturing Batches to reduce time and Increase the Capacity of the Process
Colón Torres, Vilmaris (Polytechnic University of Puerto Rico, 2022)This research will focus on analyzing the flow of sample analysis of manufacturing batches to reduce time and increase the capacity of the process in the laboratories. A laboratory in the pharmaceutical industry receives ...