Buscar
Mostrando ítems 1-10 de 50
Cycle Time Reduction using Lean Manufacturing Techniques for a Solid Pharmaceutical Product
(Polytechnic University of Puerto Rico, 2009)
Abstract ⎯ The purpose of this project was to demonstrate that the Lean Manufacturing techniques could be applied to a Solid Pharmaceutical Product in order to reduce the cycle time. During the year 2007, the Solid ...
Lean and Safe Manufacturing for an Antidepressant Tablets Coating Process
(Polytechnic University of Puerto Rico, 2009)
Abstract - The Lean and Safe Manufacturing Process (6S event) was selected for implementation in an antidepressant tablets coating manufacturing process. The coating process was identified due to the utilization of toxic ...
Increase of Manufacturing Process Output
(Polytechnic University of Puerto Rico, 2020)
Haemonetics Puerto Rico, a medical
devices manufacturing site of blood filters,
identified that approximately the 11% of the
monthly plan of the manufacturing line #3 cannot
be made using the available manufacturing ...
Mejora en el Proceso de Limpieza en los Equipos de Manufactura
(Polytechnic University of Puerto Rico, 2022)
Durante estudios de tiempo en los procesos en una farmacéutica en Puerto Rico se identificó un tiempo prolongado en la ejecución de limpieza de la Compresora que es compartida con varios productos .Por esta razón ...
Implementación de Proceso de Descarte de Productos Intravenosos en una Planta de Productos Farmacéuticos
(Polytechnic University of Puerto Rico, 2019)
Durante el pasado año, se
descartaron 2.7 millones de unidades debido a
distintos problemas de calidad. Baxter es una
compañía manufacturera de dispositivos médicos
que lleva 60 años en el pueblo de Jayuya, Puerto
Rico. ...
Optimization of a Pharmaceutical Filling Process to Comply with Federal Regulations and Minimize Process Variability
(Polytechnic University of Puerto Rico, 2019)
This article analyzes the scientific
methodology that was followed to solve a problem
that arose in a pharmaceutical installation after a
federal regulatory inspection. The route for a robust
solution was framed by a ...
Manufacturing space optimization and productivity improvement using lean manufacturing on a medical device company
(Polytechnic University of Puerto Rico, 2018)
Medical Devices industry has been
experiencing a competitive environment and
striving hard to find methods to reduce
manufacturing cost, waste and improve quality. To
be competitive, the industry is seeking for tools ...
Aplicación de Lean Six Sigma a Compañía de Construcción, Mejorando la Imagen y la Estructura
(Polytechnic University of Puerto Rico, 2015)
Hoy en día es bien importante
mantener la rentabilidad del negocio a niveles
competitivos. Si el equipo de trabajo no está
motivado, el servicio que ofrecen nunca será
completado a tiempo, trayendo consigo descontento
de ...
Potting Process Improvement for Inductors
(Polytechnic University of Puerto Rico, 2015)
During the last 20 years, X Aerospace
Company has produced enormous gains due to a
relentless focus on process in manufacturing,
engineering and research and development. These
margin increases came from many incremental ...
Mejorar el Proceso de Inspección Manual de Dosificación Sólida por un Sistema Automático
(Polytechnic University of Puerto Rico, 2015)
El proceso de producción de la tableta
de Tamper Resistant Formulation (TRF, por sus
siglas en inglés) conlleva una inspección visual de un
doscientos porciento requerida por el cliente. Esta
inspección visual en la ...