Buscar
Mostrando ítems 31-40 de 109
In-process Testing Redesign in Packaging Line of Oral Solid Dosage
(Polytechnic University of Puerto Rico, 2019)
Packaging process area request to
redesign the in-process testing to reduce waste and
increase the efficiency during the in-process testing
activities without increase in the defective unit
found by Quality during their ...
Implementación de Proceso de Descarte de Productos Intravenosos en una Planta de Productos Farmacéuticos
(Polytechnic University of Puerto Rico, 2019)
Durante el pasado año, se
descartaron 2.7 millones de unidades debido a
distintos problemas de calidad. Baxter es una
compañía manufacturera de dispositivos médicos
que lleva 60 años en el pueblo de Jayuya, Puerto
Rico. ...
Optimization of a Pharmaceutical Filling Process to Comply with Federal Regulations and Minimize Process Variability
(Polytechnic University of Puerto Rico, 2019)
This article analyzes the scientific
methodology that was followed to solve a problem
that arose in a pharmaceutical installation after a
federal regulatory inspection. The route for a robust
solution was framed by a ...
Automation of Variables Recording Process to Reduce Rework and Decrease Scripting Time
(Polytechnic University of Puerto Rico, 2018)
The companies of aerospace services
need to maintain the highest quality of their product.
Therefore, this project will focus in the improvement
of a process when verifying and validating system
level requirements. For ...
Process Optimization of Amine Reactions
(Polytechnic University of Puerto Rico, 2018)
Ospira is an inhalation anesthesia
manufacturing facility. The main products are
Deramine and Dexoflurane. To produce these
anesthetics, chemical reactions and distillation
processes are required. For Deramine it ...
Design and Implementation of Laser Marking with OCR/OCV Vision Inspection System
(Polytechnic University of Puerto Rico, 2018)
The laser marking process is aimed to
create a permanent identification and/or
descriptive information on the surface of metallic
spinal implants to provide full traceability for the
products being manufactured at ...
Cost and Safety Benefits when Implementing the Analytical Condition Inspection (ACI) Program on the F-35A (Lightning II) Fleet
(Polytechnic University of Puerto Rico, 2018)
In 2012 [1], the first F-35A’s
(conventional takeoff and landing) [2] fighter jets
took off the production line to join the US Air Force
(USAF) fleet. Since then, this weapons system has
flown in multiple missions ...
Reducción de Desperdicios en Línea de Manufactura y Determinar la Capacidad del Proceso
(Polytechnic University of Puerto Rico, 2018)
El propósito de este proyecto fue
reducir los desperdicios en la línea de manufactura
de filtros y determinar la capacidad de cada etapa
del proceso en la línea de manufactura, la cual se
compone de tres procesos ...
Improve the Lay-Up Process by Reducing 15% of the Documentation Errors within Six Months using Kaisen and/or DMAIC Six Sigma Tool
(Polytechnic University of Puerto Rico, 2018)
From August 2017 to October 2017
(3Q2017) the documentation errors (including layup errors and mixed styles) were 96% average in
one Distribution Center at the west coast. DMAIC
methodology was applied including lean ...
Implementation of an alternate single use system used to store buffer solutions of Product X
(Polytechnic University of Puerto Rico, 2022)
This research project was focused on the implementation of an alternate material used in the preparation of buffers of the production for Product X in a biotechnology company. Buffers are solutions that can resist pH change ...