Buscar
Mostrando ítems 1-10 de 23
In-Process pharmaceutical manufacturing aqueous coating suspension hold time study
(Polytechnic University of Puerto Rico, 2018)
A hold time study is established in the
development phase of any product. All the InProcess unit operations require a hold time study to
protect the integrity and quality of the final drug
product. This study will analyze ...
Changeover Reduction Time by Adjusting the Cleaning Critical Parameters in Automated CIP Systems
(Polytechnic University of Puerto Rico, 2018)
Clean-In-Place (CIP) is a widely use
process to clean biotechnology vessels contact
surfaces. CIP is an automated cleaning method that
involve minimum to no equipment disassembling
thereby reducing labor and time ...
Application of Lean Manufacturing and Lean Six Sigma Tools to Improve Back to Back Activities in the Compression Process
(Polytechnic University of Puerto Rico, 2019)
A recent opportunity regarding a
product ramp up in the production schedule due to
a potential product transfer requires the
manufacturing area to look for creative ways to
improve in order to comply with expected ...
Optimization of the Registration Process of Products on the Pharmaceutical Industry of Puerto Rico
(Polytechnic University of Puerto Rico, 2018)
Registration Process for
pharmaceutical products in Puerto Rico has unique
requirements for the marketing, sale, and
distribution of the products. The Organizations
must be approved before they can market, sell ...
Reducción del Tiempo de Cambio para la Línea de Empaque#5
(Polytechnic University of Puerto Rico, 2018)
Se utiliza la técnica de Lean
Manufacturing con la metodología DMAIC para
reducir el tiempo de cambio o Changeover de la
línea de empaque#5. Para llevar a cabo su
implementación se midieron las fases de
culminación ...
Audit Process Optimization in the Manufacturing Area
(Polytechnic University of Puerto Rico, 2021)
This project was developed to demonstrate a viable audit process optimization in the manufacturing area. The AbbVie site ubicated in Barceloneta, Puerto Rico,started with only one product back in ...
Validation and Project Process Improvement Using DMAIC Methodology
(Polytechnic University of Puerto Rico, 2021)
Lean Six Sigma Methodology impacts positively the efficiency, customer satisfaction and quality for manufacturing and systematics process. This article provides a successful example of how the Sig Sigma ...
Evaluation to Sleeves Used in Granulation Department for the Graduate Programs at Polytechnic University of Puerto Rico
(Polytechnic University of Puerto Rico, 2021)
The DMAIC methodology was applied to analyze a manufacturing system at Johnson & Johnson Pharmaceuticalsin Las Piedras, Puerto Rico. The methodology was used to improve the time for changing and ...
Mejoras al Proceso de Empaque parala Jurisdicción de China
(Polytechnic University of Puerto Rico, 2022)
En los últimos dieciocho meses, el mundo ha confrontado retos con el suministro de materia prima. En esta empresa no es la excepción, además, la productividad redujo, los desperdicios aumentaron y el tiempo de ...
Process Time Reduction in Manufacturing Areas: Visual Valves Identification on Manufacturing Area specifically on Media Prep Area, Media Preparation tanks to Pursue Agility on the Visual inspections required before, during and after the Media Prep Solution are Prepared
(Polytechnic University of Puerto Rico, 2022)
Time of production process and associate activities were evaluated for Media Prep manufacturing process on Juncos, P.R. The voice of the customer requested reduced time inspection process before, ...