Zur Kurzanzeige

dc.rights.licenseAll rights reserveden_US
dc.contributor.advisorMorales, José A.
dc.contributor.authorLópez, Jaymarie
dc.date.accessioned2022-07-08T15:31:36Z
dc.date.available2022-07-08T15:31:36Z
dc.date.issued2022
dc.identifier.citationLópez, J. (2022). Process Time Reduction in Manufacturing Areas: Visual Valves Identification on Manufacturing Area specifically on Media Prep Area, Media Preparation tanks to Pursue Agility on the Visual inspections required before, during and after the Media Prep Solution are Prepared [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico.en_US
dc.identifier.urihttp://hdl.handle.net/20.500.12475/1631
dc.descriptionDesign Project Article for the Graduate Programs at Polytechnic University of Puerto Ricoen_US
dc.description.abstractTime of production process and associate activities were evaluated for Media Prep manufacturing process on Juncos, P.R. The voice of the customer requested reduced time inspection process before, during and after batching preparative activities and process. DMAIC methodology was used to evaluate the production costs. Fishbone, Scatter, Grant Charts, and other tools were used to determine what was the possible cause of highest time associates take to find valves, and equipment in gray area, even though the valves are identified with its proper part number. Equipment and material identification were most probable causes. Improvements in procedures and identification tags were used to perform and established the new color code tags, based on the function and type of addition of the valves. Evaluated process and defined the color code for the valve and established a 5S in the gray area reduced time and cost, also process became more agile and effective. Key Term⎯ Agility, DMAIC, Grant Chart, Lean Manufacturing.en_US
dc.language.isoenen_US
dc.publisherPolytechnic University of Puerto Ricoen_US
dc.relation.ispartofManufacturing Competitiveness;
dc.relation.ispartofseriesSpring-2022;
dc.relation.haspartSan Juanen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Researchen_US
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Postersen_US
dc.subject.lcshSix sigma (Quality control standard)
dc.subject.lcshPharmaceutical industry--Quality control
dc.subject.lcshContinuous improvement process
dc.subject.lcshLean manufacturing
dc.subject.lcshTime management
dc.titleProcess Time Reduction in Manufacturing Areas: Visual Valves Identification on Manufacturing Area specifically on Media Prep Area, Media Preparation tanks to Pursue Agility on the Visual inspections required before, during and after the Media Prep Solution are Prepareden_US
dc.typeArticleen_US
dc.rights.holderPolytechnic University of Puerto Rico, Graduate Schoolen_US


Dateien zu dieser Ressource

Thumbnail
Thumbnail

Das Dokument erscheint in:

Zur Kurzanzeige