Listar Design Project Articles Master Degree por título
Mostrando ítems 177-196 de 1485
-
Clean Room Differential Pressure Monitoring Improvements
(Polytechnic University of Puerto Rico, 2019)Manufacturing of oral solid dosage (OSD) forms, such tablets and capsules, is performed in a highly regulated environment. One of the guidelines used to provide the minimum requirements that a manufacturer must meet ... -
Clean Steam Energy Conservation Process Design
(Polytechnic University of Puerto Rico, 2011)Abstract ― The objective of this article is to design the sterilization methodology and processes needed in a product or equipment that requires the injection of clean steam to create a sterile environment. Clean steam is ... -
Cleaning Validation of a Manufacturing Line using CIP-100 Detergent and a Clean-in-place Skid System
(Polytechnic University of Puerto Rico, 2022)Cleaning Validation is a prime element of control to the cross contamination and potential carry over topic at the manufacturing industry. This process must assure the quality, safety and efficiency of cleaning ... -
Coating Process Improvement
(Polytechnic University of Puerto Rico, 2021)An increase in the number of events associated to AQLfailure that resulted on partial batch rejections was observed in 2020 for Tablets/Caplets formulations due to cosmetic conditions ... -
Coating Process Improvements in Solid Dose Form Manufacturing
(Polytechnic University of Puerto Rico, 2013)Organization’s goals and objectives use strategic scorecards that include Quality, Economics, Speed and Culture to establish business metrics focused on building continuous future success and competitiveness to create ... -
Coating Process Minor Changeover Reduction
(Polytechnic University of Puerto Rico, 2020)During the Covid-19 Pandemic, many challenges arose that force healthcare companies to execute in new ways. Product demand was increased due to its effectiveness against the pandemic impact in the patients. To provide a ... -
Cogeneration with Energy Sustainability Project for Bacardi Distillery
(Polytechnic University of Puerto Rico, 2021)At the Bacardi Distillery facilities in Puerto Rico, power outages are a problem that have affected rum production operations and costs. It has been identified that the cause of this problem is that the facilities do not ... -
Combination Products Regulation – A Guide to Compliance
(Polytechnic University of Puerto Rico, 2015)The Food and Drug Administration (FDA or Agency) has issued a regulation on the current good manufacturing practices (CGMP’s) requirements applicable to combination products. The new rule is intended to promote the ... -
Commercial Daily Delinquency Report Automation for a Banking Institution in Puerto Rico
(Polytechnic University of Puerto Rico, 2023)Commercial credit risk management entails the monitoring of key performance indicators, including delinquency ratios, for the commercial loan portfolio. The Commercial Credit Risk (CCR) team in a banking institution ... -
Commissioning and Qualification of Utilities in a new Filling Line Expansion Project
(Polytechnic University of Puerto Rico, 2017)As part of a project for a Parenteral Filling Line expansion, Commissioning and Qualification activities were performed in new and existing modified systems to provide documented evidence and ensure that all equipment, ... -
Company Moving to New Building After Hurricane Maria
(Polytechnic University of Puerto Rico, 2018)The main objective of this project is to move the operations of Pratt & Whitney Puerto Rico to a new building facility in Aguadilla by the end of Q2. The company was supposed to move by 9/2017, but Puerto Rico suffered ... -
Company Wide Software Deployment
(Polytechnic University of Puerto Rico, 2017)This papers reviews the deployment of a new software tool in a private company and the issues that it triggered due to an ill prepared user base. It also covers the quick solutions established to address the issues in a ... -
Comparación de Cálculos de Niveles de Inundación entre un Análisis Hidrológico e Hidráulico Existente y un Modelo de Elevación Digital del Terreno
(Polytechnic University of Puerto Rico, 2013)Actualmente se han producido impresionantes avances en el desarrollo de aplicación de sistemas de información geográfica (GIS), al desarrollo y gestión de los recursos hídricos. Recientemente los Modelos de Elevación Digital ... -
Comparación de Eficiencia en Cuanto a Comportamiento y Costo Entre el Diseño ASD y LRFD para el Edificio UNILOPEZ
(Polytechnic University of Puerto Rico, 2009)Abstracto - Este documento consistió en el análisis estructural del edificio de oficinas UNILOPEZ (estructura de acero), mediante el uso de un programa de computadoras llamado ETABS, el cual se especializa en el análisis ... -
Comparación de estudio topográfico entre el método de agrimensura convencional y el uso de vehículos aéreos no tripulados de uso general
(Polytechnic University of Puerto Rico, 2019)En la actualidad el uso de vehículos aéreos no tripulados es muy accesible al público en general. En la agrimensura, la utilización de esta nueva herramienta se está haciendo muy popular debido a que, en teoría, agiliza ... -
Comparación de los Sistemas de AC Inverters y Convencional
(Polytechnic University of Puerto Rico, 2013)Este artículo está enfocando en la evaluación y análisis de dos tipos de sistemas de Aire Acondicionado (AC) Inverters y Convencional utilizados con frecuencia hoy en día tanto en residencias como en comercios. Ambos ... -
Comparación de los Sistemas Sanitarios por Gravedad y por Presión
(Polytechnic University of Puerto Rico, 2013)El siguiente artículo estará basado en la comparación entre un sistema sanitario convencional como lo es el de gravedad contra un sistema sanitario por presión. Se utilizará un mismo lugar para evaluar ambos sistemas ... -
Comparación de los Sistemas Sanitarios por Gravedad y por Vacio
(Polytechnic University of Puerto Rico, 2012)Este artículo está enfocado en la evaluación y comparación de los sistemas sanitarios por gravedad y por vacio. Ambos sistemas sanitarios son diferentes en diseño, construcción ... -
Comparación del Desarrollo de una Aplicación usando Metodologías Alternas: .Net Bootstrap Framework en Visual Studio versus Modelo BPMN en Bizagi
(Polytechnic University of Puerto Rico, 2017)El presente proyecto compara dos metodologías de desarrollo la primera utilizando programación convencional y la segunda usando la notación estándar BPMN. Para dicho propósito estaremos utilizando los frameworks .Net ... -
Comparación entre el Proceso de Permisos bajo la Ley Orgánica de la ARPE y la Reforma de Permisos de Puerto Rico
(Polytechnic University of Puerto Rico, 2013)La reforma del proceso de permiso implementada en 2010, consistió de un proyecto de reingeniería que logró la transformación y modernización del proceso creado bajo la Ley Orgánica de ARPE en el 1975. Ambos procesos son ...