Zur Kurzanzeige

dc.rights.licenseAll rights reserveden_US
dc.contributor.advisorGonzález Miranda, Carlos J.
dc.contributor.authorMartínez Dávila, Leida V.
dc.date.accessioned2020-09-09T14:27:53Z
dc.date.available2020-09-09T14:27:53Z
dc.date.issued2016
dc.identifier.citationMartínez Dávila, L. V. (2016). Standardize and establish voice of the customer process using DMAIC methodology [Unpublished manuscript]. Graduate School, Polytechnic University of Puerto Rico.en_US
dc.identifier.urihttp://hdl.handle.net/20.500.12475/527
dc.descriptionDesign Project Article for the Graduate Programs at Polytechnic University of Puerto Ricoen_US
dc.description.abstractThis research project was focused in the Voice of the Customer process robustness. Voice of the Customer process does not have a clear procedure to creates a standardize survey and analyze the data that has been collected. In order to understand the issues happening at the Engineering department an investigation project was developed. This investigation was documented using the DMAIC methodology. This methodology have a lot of tools that are very helpful to document and analyze all the data regarding the process. In the Define phase the tool used was the Project Charter. It was used to document the project title, area affected, problem statement and benefits of the project. The tools used in the Measure phase were the Thought Process Map, the SIPOC and the Process Map. During this phase it was identified the current baseline as the basis for improvement. This baseline was compared to the performance metric at the conclusion of the project to determine objectively whether significant improvement have been made. The actual process metrics were used in the Analyze phase to evaluate the process. The Cause and Effect Matrix and the 7 Waste analysis were also performed during this phase. These tools helped to identify the root causes of the problem, and the possible actions needed to resolve it. The major problem was that the voice of the customer process was not documented properly and all the department areas had their own way to do it. In the Improve phase it was defined that an internal procedure will be created to document this process and all the impacted areas will need to follow it. The Control phase data demonstrates that the actions implemented were effective because all the engineering department areas have a VOC data and a robust analysis of this data. Key Terms  DMAIC, Voice of the Customer.en_US
dc.language.isoen_USen_US
dc.publisherPolytechnic University of Puerto Ricoen_US
dc.relation.ispartofManufacturing Competitiveness;
dc.relation.ispartofseriesSpring-2016;
dc.relation.haspartSan Juanen_US
dc.subject.lcshSix sigma (Quality control standard)
dc.subject.lcshCustomer services
dc.subject.lcshPolytechnic University of Puerto Rico--Graduate students--Research
dc.titleStandardize and Establish Voice of the Customer Process using DMAIC Methodologyen_US
dc.typeArticleen_US
dc.rights.holderPolytechnic University of Puerto Rico, Graduate Schoolen_US


Dateien zu dieser Ressource

Thumbnail

Das Dokument erscheint in:

Zur Kurzanzeige